• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.679-682
• /
• 2004

$SrGa_2S_4$:Eu green phosphor and SrS:Eu red phosphor have been synthesized by co-precipitation method, respectively. Two sulfide phosphors were influenced by oxygen defect in host materials. Excitation spectra of these phosphors have high efficiency at the long wavelength region. And emission efficiency is increased under the excitation wavelength of 465nm. The combination of thiogallate green phosphor and sulfide red phosphor based on blue light InGaN chip has made it possible to emit white light.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.736-739
• /
• 2002

We report on white light emission from a light emitting diode(LED) prepared by blending a red emitting copolymer, m-SiPh PPV-co-MEH PPV, and a blue emitting polyvinylcarbazole (PVK). White light emission was realized when the weight ratio of the m-SiPh PPV-co-MEH PPV : PVK equals to 1 : 30, in which the commission Internationale de L'Eclairage coordinates were x=0.3266 and y=0.3438.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3691-3695
• /
• 2012

Photocatalytic reduction of hexavalent chromium (Cr(VI)) in ferric-tartrate system under irradiation of visible light was investigated. Effects of light resources, initial pH value and initial concentration of various reactants on Cr(VI) photocatalytic reduction were studied. Photoreaction kinetics was discussed and a possible photochemical pathway was proposed. The results indicate that Fe(III)-tartrate system is able to rapidly and effectively photocatalytically reduce Cr(VI) utilizing visible light. Initial pH variations resulte in the concentration changes of Fe(III)-tartrate complex in this system, and pH at 3.0 is optimal for Cr(VI) photocatalytic reduction. Efficiency of Cr(VI) photocatalytic reduction increases with increasing initial concentrations of Cr(VI), Fe(III) and tartrate. Kinetics analysis indicates that initial Fe(III) concentration affects Cr(VI) photoreduction most significantly.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.635-644
• /
• 2023

Due to the rapid development of the livestock industry, particularly due to residual pharmaceutical antibiotics, environmental populations have been negatively affected. Herein, we report a ZnO/melamine-functionalized carboxylic-rich graphene oxide (ZFG) photocatalyst for visible light-driven photocatalytic degradation of tetracycline hydrochloride in aqueous solutions. The properties of the photocatalysts were evaluated by XRD, FTIR, XPS, Fe-SEM, HR-TEM, TGA, Raman spectroscopy, UV-Vis spectroscopy, zeta potential, and electrochemical measurements. The photocatalytic activity was measured using high-performance liquid chromatography. The photocatalytic properties of the ZFG photocatalyst evaluated against the tetracycline hydrochloride (TCH) antibiotic under visible light irradiation showed superior photodegradation of 96.27% within 60 min at an initial pH of 11. The enhancement of photocatalytic degradation was due to the introduction of functionalized graphene, which increases the light-harvesting capability and molecular adsorption capability in addition to minimizing the recombination rate of photogenerated charge carriers due to its role as an electron acceptor and mediator.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.336-343
• /
• 2020

Large-scale cultivation of Microcystis aeruginosa in different light conditions was conducted for verifying the cell growth in a greenhouse system. Environmental and chemical parameters of the large-scale culture medium were measured for analyzing the interaction between M. aeruginosa and its symbiotic bacteria. During cultivation, a difference in cell growth pattern was observed between control (natural light) and light-limited groups (reduction of blue, green, and blue/green light, respectively). Comparing the control group, the light reduced groups showed slow and delayed cell growth through the cultivation period. Also, there is differences in the consuming pattern of total nitrogen and total phosphorus which indicated that the possibility of interaction between M. aeruginosa and symbiotic bacteria.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1511-1514
• /
• 2009

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.274-277
• /
• 2016

Effects of interlayer insertion between multi-quantum well and electron blocking layer of green light emitting diode on diode performances were studied by device simulation. Dependence of Mg doping depth on characteristics of current-voltage, emitting wavelength, leakage current, and external quantum efficiency was investigated, and the optimum diode structure was presented. Device structures with interlayers doped in entire region and up to 30 nm showed remarkable reduced leakage current and effectively relieved efficiency droop which is one of the biggest challenges in green light emitting diode. Furthermore, the most improved characteristics in current-voltage and electroluminescence was obtained by the latter structure.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.632-637
• /
• 2015

Mesoporous $TiO_2$ granules were prepared by spray pyrolysis using nano-sized titania particles which were synthesized by a hydrothermal method, and they were evaluated as the photoanode of dye-sensitized solar cells. To enhance the cell efficiency, nanoparticles within granules were chemically interconnected by adding titanium ethoxide (TEOT) to colloidal spray solution. The resulting titania particles had anatase phase without forming rutile. $TiO_2$ granules obtained showed about 400 nm in size, the specific surface area of $74-77m^2/g$, and average pore size of 13-17 nm. The chemical modification of $TiO_2$ granules by adding TEOT initially to the colloidal spray solution was proved to be an effective way in terms of increasing both the light scattering within photoanode and the lifetimes of photo-excited electrons. Consequently, the light-harvesting efficiency of TEOT-modified granules (${\eta}=6.72%$) was enhanced about 14% higher than primitive nanoparticles.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.133-134
• /
• 2008

A novel near infrared(NIR) absorbing dyes were synthesized by using bis-aldehyde formyl aromatic compounds and heteroaryl derivatives with the reactive methylene group. These dyes provided a range of the NIR wavelength region about 720 nm value. Also, the light absorbing properties of these dyes were investigated in our experiment results. In generally, these NIR colorants may be potential used for optical recording media, DNA sequencing probe and laser beam printings.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.441-446
• /
• 2023

Electrical and optical characteristics of the GaN-based light-emitting diode (LED) with the improved multi-quantum well (MQW) structure have been studied for light source in bio-sensing systems. Novel GaN/In_0.1GaN/In_0.2GaN/In_0.1GaN/GaN and Al_0.1GaN/GaN/In_0.2GaN/GaN/Al_0.1GaN (MQW) structures were suggested, and their radiative recombination rate, light output power, electroluminescence, and external quantum efficiency were compared with those of the conventional GaN/In_0.2GaN/GaN MQW structure using device simulation. The LED with the GaN/In_0.1GaN/In_0.2GaN/In_0.1GaN/GaN MQW structure showed an excellent recombination rate of 5.57 × 10²⁸ cm^-3·s^-1 that was more than one order improvement over that of the conventional LED. In addition, the efficiency droop was relieved by the suggested stepped MQW structure.