• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.359-364
• /
• 2002

We report the structure, thermal and magnetic properties of a non-equilibrium $Al_{0.6}(Fe_{50}Cu_{50})_{0.4}$ alloy powder produced by rod milling and chemical leaching. An X-ray diffractometry(XRD), a transmission electron microscope(TEM), a differential scanning calorimeter(DSC), a vibrating sample magnetometer(VSM), and superconducting quantum interference device(SQUID) were utilized to characterize the as-milled and leaching specimens. The crystallite size reached a value of about 8.82 nm. In the DSC experiment, the peak temperatures and crystallization temperatures decreased with increasing milling time. The activation energy of crystallization is 200.5 kJ/mole for as-milled alloy powder. The intensities of the XRD peaks of as-milled powders associated with the bcc type $Al_{0.5}Fe_{0.5}$ structure formative at $350^{\circ}C$ sharply increase with increasing annealing temperature. Above $400^{\circ}C$, peaks alloted to $Al_{0.5}Fe_{0.5}$ and $Al_{5}Fe_{2}$ are observed. After annealing at $600^{\circ}C$ for 1h, the leached Ll specimen transformed into bcc $\alpha$-Fe and fcc Cu phases, accompanied by a change in the structural and magnetic properties. The saturation magnetization decreased with increasing milling time, and a value of about 8.42 emu/g was reached at 500 h of milling. The coercivity reached a maximum value of about 142.7 Oe after 500 h of milling. The magnetization of leached specimens as function of fields were higher at 5 K, and increased more sharply at 5 K than at 100 K.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.30-33
• /
• 2001

Melting is one of the most effective treatments for stabilizing heavy metals and also creates high value by-products. In this study, authors evaluated the leaching characteristics of heavy metals in melting slag obtained from incinerator ashes. In order to evaluate the environmental compatibility of the recycled melting slag, the samples analysed various leaching tests of heavy metals were raw incinerator ashes, melting slag and the construction materials recycled from melting slag. As the results: (1) The leaching concentrations of tile melting slag were lower than those of the raw incinerator ashes in the experiment performed in accordance with Korea Standard Leaching Test (KSLT). (2) The result of leaching test with the method of RG Min-StB 93. FGSV Forschungsgesellschaft fur Stra $\beta$ en- und Verkehrswesen) met the requirements in German. (3) The compressive strengths of mortar samples used for evaluating the feasibility of recycling the melting slag as construction materials also showed the suitable range for recycling (4) Melting slag was considered the stable materials with respect to the chemical stability against chemical solutions with various pH conditions.

• Journal of the Korean Chemical Society
• /
• v.14 no.3
• /
• pp.257-261
• /
• 1970

Some factors such as the weight ratio, reaction time and temperature for the separation of rare earth elements from monazite are studied. The influence of the inorganic phosphate for the leaching is also studied.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.455-458
• /
• 2003

We investigated the leaching of elements from anthracite ashes by interactions with seawater. The results show that consumption rates of dissolved oxygen are 7.5 times greater in the seawater system than in the fresh water system and indicate that the differences in DO consumption rate may plat a role in regulating the element leaching from the coal ashes. It is revealed that seawater's pH buffering capacity is the most important factor that makes the leaching of elements and their chemical behaviors in the seawater system different from those in the fresh water environments. In overall, element leaching from the weathered ash is smaller than that from the fresh ash. However, the leaching of Si, Fe, Al, Mn, phosphate, and some other elements were independent of weathering. They were dependant only on the pH of the solutions.

• Analytical Science and Technology
• /
• v.35 no.2
• /
• pp.41-52
• /
• 2022

The leaching of nitrate from soil increases the concentration of elements, such as nitrogen, phosphorus, and potassium, in water, causing eutrophication. In this study, the feasibility of using clinoptilolite as an ion-exchange material to reduce nitrate leaching in soil was investigated. Soil samples were collected from three soil depths (0 - 30, 30 - 90, and 90 - 120 cm), and their sorption capacity was determined using batch experiments. The effects of contact time, initial concentration, adsorbent dosage, pH, and temperature on the removal of NO₃^- were investigated. The results showed that an initial concentration of 25 mg L^-1, a contact time of 120 min, an adsorbent dosage of 5.0 g/100 mL, a pH of 3, and a temperature of 30 ℃ are favorable conditions. The kinetic results corresponded well with a pseudo-second-order rate equation. Intra-particle diffusion also played a significant role in the initial stage of the adsorption process. Thermodynamic studies revealed that the adsorption process is spontaneous, random, and endothermic. The results suggest that a modification of clinoptilolite effectively reduces the leaching of nitrate in soil.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2005

Fractional compositions and leaching potentials of Cd, Cu and Zn were investigated in the soils which had been disposed with the metal processing wastes, tungsten mine tailings and low quality coal mine area. Total concentrations of metals in these soils were higher than in non-polluted paddy and upland soils. Fractions of Cd, Cu and Zn were mostly reducible, organic and residual forms, but varied with origins of wastes. Residual fraction was a predominant form in the nonpolluted soils. Leaching potentials of metals were higher in polluted soils than in non-polluted soils. Metals leached were higher at pH 4.0 than 7.0 and increased with the duration time. After 25 to 35 hrs, metals released from soils reached a pseudoequilibrium. Leaching potential of metals in non-polluted soils was low due to high percentage of residual fractions.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.267-268
• /
• 2005

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.661-669
• /
• 2017

A distributed watershed model CAMEL (Chemicals, Agricultural Management and Erosion Losses) was applied to a small rural watershed where intensive livestock farming sites are located to estimate nitrate leaching rates from soil to groundwater. The model was calibrated against the stream flows, and T-N and $NO_3-N$ concentrations were observed at the watershed outlet for three rainfall events in 2014. The simulation results showed good agreement with the observed stream flows ($R^2=0.67{\sim}0.93$), T-N concentrations ($R^2=0.40{\sim}0.58$) and $NO_3-N$ concentrations ($R^2=0.43{\sim}0.65$). The estimated annual nitrate leaching rate of the watershed was 33.0 kg N/ha/yr. The contributing proportions of individual activities to the total nitrate leaching rate of the watershed were estimated for livestock farming, applications of chemical fertilizer, and manure. The simulation results showed that the highest contributor to the nitrate leaching rate of the watershed was chemical fertilizer applications. The simulation period was for one year only, however, and results may vary depending on different conditions. Gathering input data over a longer period of time and monitoring data for calibration is needed. When this has been accomplished, it is expected that this model can be applied to small rural watersheds for evaluating temporal and spatial variations of nitrogen transformations and transport processes.

• Journal of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.54-58
• /
• 1966

By means of aqueous oxidation in ammonia solution, metallic zinc and sulfur in marmatite were leached. In this study, it was found that the concentration of ammonia was extremely influenced on the oxidation ratio of Zn and S, and the more the leaching temperature was low, the more their leaching ratio was decreased. The maximum leaching ratio to the contents in marmatite was obtained at the following conditions. Particle size 270 mesh above, $NH_3$ conc, 25%, Press. 4.2 kg/$cm_2$, Temp.$ 60 ^{\circ}C$, Time 20hrs. Leaching ratio; Zn 55% and S 50%.