• Journal of Biomedical Engineering Research
• /
• v.13 no.2
• /
• pp.165-174
• /
• 1992

Compliance mismatch across an end-to-end anastomosis was measured In the In vitro experimental setup. A 35mm camera was used and Image process was done in Gould/ DeAnza Image processor. The results showed that compliances of Penrose tubing and synthetic PTFE grafts were In good agreement with the previously reported In vivo data. PTFE grafts exhibited a nonlinear behavior with compliance decreasing with Increasing transmural pressure, whereas the compliance of the Penrose tubing remained relatively constant within the range of the pressures in which data were obtained. The lumen cross sections at the anastomosis were affected by the suture and the mismatch In compliance between the Penrose tubing and vascular grafts. The varla~lons In the lumen dtameter at the anastomosis was more pronounced with increasing transmural pressures. From the present study, it was clearly demonstrated that the compliance of prosthetic grafts Is much lower than that of the arteries. In addition to the hemodynamlc consequences, compliance mismatch across the anastomosis has been known to lead to Increased anastomotlc and suture stresses with resultant suture line dehlscence and false aneurysm formation. Thus, there are good hemodynamic reasons to suppose that Introduction of a less compliant arterial graft Into the arterial circulation wlll be damaging and that grafts should be made to match the elastic behavior of their host arteries as closely possible.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.98-99
• /
• 2012

Deposition of thin films using magnetron sputtering plasmas is a well-developed, classical technology. However, detailed investigations using advanced diagnostics are insufficient in magnetron sputtering, in comparison with plasma-aided dry etching and plasma-enhanced chemical vapor deposition. In this talk, we will show examples of diagnostic works on magnetron sputtering employing metal targets. Diagnostic methods which have fine spatial resolutions are suitable for magnetron sputtering plasmas since they have significant spatial distributions. We are using two-dimensional laser-induced fluorescence spectroscopy, in which the plasma space is illuminated by a tunable laser beam with a planer shape. A charge-coupled device camera with a gated image intensifier is used for taking the picture of the image of laser-induced fluorescence formed on the planer laser beam. The picture of laser-induced fluorescence directly represents the two-dimensional distribution of the atom density probed by the tunable laser beam, when an intense laser with a relatively wide line-width is used. When a weak laser beam with a relatively narrow linewidth is used, the laser-induced fluorescence represents the density distribution of atoms which feel the laser wavelength to be resonant via the Doppler shift corresponding to their velocities. In this case, we can obtain the velocity distribution function of atoms by scanning the wavelength of the laser beam around the line center.

• Korean Journal of Optics and Photonics
• /
• v.24 no.3
• /
• pp.143-147
• /
• 2013

A Raman spectrometer is essential for analyzing the characteristics of graphene. The commercial micro-Raman spectrometer is useful for measuring small areas, but due to the small measuring area, it has limited use in industry, as a sampling measure. This paper suggests a Raman spectrometer able to get a large area image of graphene. By using this image, we can get information on defects and on the presence of graphene. Therefore, this equipment can be used for quality assessment for production of graphene.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.49-59
• /
• 2006

In this paper, a transparent film exposed the effect of heat cut-off, reveal as means of the prevention to wrong operation of parts of display and forgery of the credit card, also it will intercept rising of the temperature in interior of a room and car by diminish the influx of near-infrared ray wavelength of solar energy come from the window. As in the past a film which absorb a wavelength of $800{\sim}2500nm$ in near-infrared ray, manufactured in physical vapor deposition(PVD), chemical vapor deposition(CVD) to using ATO, ITO of inorganic materials or sputtering method. but it has lots of problem in manufacture. On the other hand, recently a paper said it easily form a transparent film to using organic dye. This paper show synthesis of many derivatives used in Ni-complex and then it investigate to optical property and durability of flim by make the transparent film.

• The Research Journal of the Costume Culture
• /
• v.20 no.1
• /
• pp.62-71
• /
• 2012

The purpose of this research is to analyze the characteristics of the color combination in Eco fashion design. 532 pictures related to eco was collected through Eco brand web sites from 2008 through 2011. The characteristics for analysis include color combination and tone. The method of research is content and statistical analysis. The result of the research is summed up below. First, achromatic color was most frequently presented in Eco fashion. Also monotone color or single color combination were displayed often. Secondly, many dresses were of single color combination and T-shirt items displayed contrast color combination created by luminosity difference. Third, the outcome of comparing seasons was that both seasons presented single color and contrast color combination. The difference between countries proved slight as single color coloration dominated. This considered the process which was non-chemical manufacture for eco-friendly. For the combination of colors, the same coloration with single colors or contrast coloration due to the differences of brightness were presented quite often, generally, the modern image fashion without fancy factors have shown a lot. These results that minimalism trend was included in eco-friendly image.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.113-121
• /
• 2013

The road icing forecast and snow detection system using state evaluation algorithm of multi sensor optimizes snow melting system to control spread time and amount of chemical spread application This system operates integrated of contact/non-contact sensor and infrared camera. The state evaluation algorithm of the system evaluates road freezing danger condition and snowfall condition (snowfall intensity also) using acquired data such as temperature/humidity, moisture detection and result of image signal processing from field video footage. In the field experiment, it proved excellent and reliable evaluated result of snowfall state detection rate of 89% and wet state detection rate of 94%.

• Journal of the Korean Society of Visualization
• /
• v.17 no.1
• /
• pp.43-52
• /
• 2019

'Ionic wind' is phenomenon induced by corona discharge which occurs when large electric potential is applied to electrodes with high curvature. The ionic wind has advantage that it could generate forced convective flow without any external energy like separate pump. In this study, 'pin-mesh' arrangement is utilized for experiments. First, optimization of configuration is conducted with local momentum of ionic wind behind the mesh. Empirical equation for prediction about velocity profile was derived using the measured results. Secondly, the enhancement of mass transfer rate of acetone with ionic wind was analyzed. Also, the drying efficiency using a fan which has same flow rate was compared with ionic wind for identification of additional chemical reaction. At last, the drying process of organic solvent was visualized with image processing. As a result, it was shown that the use of ionic wind could dry organic matter four times faster than the natural condition.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.629-632
• /
• 2020

현대사회는 4차 산업혁명 시대가 도래하면서 초연결, 초지능, 초융합 사회로 변화되고 있다. 최근 교육부는 많은 변화가 요구되고 있는 교육분야, 교육정책 방안으로 SW(소프트웨어)교육에 AI(인공지능) 교육까지 추가되야 한다고 제안하고 2024년까지 첨단 기술을 활용한 지능형 과학실을 구축한다고 밝혔다. 이에 본 논문에서는 정부의 교육정책 방안이 원활하게 진행될 수 있고 융합 교육 분야에서 활용될 수 있는 "미래 지능형 과학실 활용을 위한 화학원소기호 이미지 기계학습 AI·SW교육 프로그램"을 제안하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.167-171
• /
• 2014

Using chemical vapor deposition(CVD), the synthesis of graphene was performed on poly and single crystalline Cu substrates. The growth behavior of graphene and its characterization were shown utilizing the optical microscopic image and its image analysis. As a result in the analysis of graphene growth, it was found out the graphene is growing always in particular direction in relation to the crystalline direction of a single grain in polycrystalline Cu substrate. With the image analysis it was possible to show the characterization of graphene, such as the growth direction and the number of layers showing single, double and triple layers, within the neighboring single grains in polycrystalline Cu. In addition, the relatively large area of graphene with about $3mm^2$ on Cu(111) having high quality, single layer, and single crystalline was shown along with its characterization.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.179-198
• /
• 2004

Organic electroluminescent devices are light-emitting diodes in which the active materials consist entirely of organic materials. Recently, many fluorescent organic materials have been reported and the study on synthesis and application of new organic light-emitting materials has been demanded. This paper reports the optical and electrical characteristics of OLEDs using novel polymers containing biphenyl structure. First, Optical properties of novel light-emitting biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) and emitted blue, bluish green color, which is attributed to the overlap area between PL spectrum of host(PVK) and absorption spectra of guests(polymer). This is correspondent with F$\"{o}$rster energy transfer process in the blends. And, OLED devices were fabricated using poly (3,4-ethylenedioxy thiophene) (PEDOT) as a hole injection material and tris-(8-hydroxyquinoline) aluminum ($Alq_3$) as an electron transporting material. EL devices fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L chatacteristics and emitting efficiency of EL devices were examined. Finally, the drift mobility of PVK doped with biphenyl derivatives and $Alq_3$ were measured by TOF technique varying applied electric field. EL efficiency was increased as the ratio of hole mobility of PVK doped with biphenyl derivatives and electron mobility of $Alq_3$ was close to one.