• Elastomers and Composites
• /
• 제54권1호
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.42-47
• /
• 2019

The four different polymer compounds were manufactured to make cable sheath for ship industry. Two kinds of ethylene-vinyl acetate (EVA) were selected as main matrix polymers for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with the contents of fire retardant, silane coated aluminum hydroxide (S-ATH). Rheology, Mooney viscosity, and tensile strength increased with S-ATH contents by reinforcing effect. With increasing fire retardant amount, fire resistance increased, but cold resistance didn't show an obvious enhancement due to polar effect of vinyl acetate in EVA.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.118-122
• /
• 2019

Four different polymer compounds were manufactured to make cable sheaths for the shipping industry. Two kinds of ethylene vinyl acetate (EVA) as the main matrix polymers and EVA-grafted maleic anhydride (EVA-g-MAH) as the coupling agent were selected for compounding with fire retardant, crosslinking agent, filler, plasticizer, and other additives. The properties of the four compounded materials were investigated with different contents of the fire retardant, silanecoated magnesium dihydroxide (S-MDH). In the rheology evaluation, the $t_{60}$ and ${\Delta}T$ values increased with increasing S-MDH contents. On the other hand, the tensile strength decreased with increasing S-MDH content due to a relative decrease in binder polymers. With increasing S-MDH content, fire resistance increased, but cold resistance showed no obvious enhancement due to the polar effect of vinyl acetate in EVA.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 추계 총회 및 학술발표회
• /
• pp.46-51
• /
• 1993

Poly(vinyl chloride) was modified by reacting with sodium N-methyldithiocarbamate or N-methyl-N-carboxymethyldithiocarbamate to obtain crosslinked dithiocarbamated PVC(PMD, PSDC). In addition PSDC were substituted with metal ions of $Ma^+, Li^+$ and $Cs^+$. PLMD and PSDC were reacted with copper ions in alcohol or aqueous solution to produce chelate complexes of dithiocarbanated PVC, respectively(PMD-$Cu^{2+}$, PSDC-$Cu^{2+}$). PSDC was irradiated by ultraviolet light to enhance crosslinking(PSDC-UV).

• Macromolecular Research
• /
• 제8권2호
• /
• pp.89-94
• /
• 2000

A semi-interpenetrating network (IPN) was prepared for a temperature-sensitive polymer system composed of sodium alginate and poly (N, N-dimethylaminoethyl methacrylate (DMAEMA)-co-ethyl acrylamide (EAAm)). The role of sodium alginate is to provide crosslinked network and that of poly(DMAEMA-co-EAAm) is to provide temperature responsiveness to the polymer system. Semi-IPN gel shows temperature-induced swelling transition at the same temperature of the lower critical solution temperature of poly(DMAEMA-co-EAAm) and its swelling kinetics is manipulated by the control of crosslinking densitv.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.289-299
• /
• 2020

Highly aromatic (HA) oils are common processing aids used in tire tread compounds. However, they often bleed and evaporate from the vulcanizates during tire use. Thus, the mechanical and dynamical properties of the tire decrease. To overcome this problem, we investigated nonfunctionalized liquid butadiene rubber (LBR-305, Kuraray) and center-functionalized liquid butadiene rubber (C-LqBR), polymerized by anionic polymerization. In addition to the liquid butadiene rubbers, p-tert-octylphenol (P-Resin) and C5 hydrocarbon (H-Resin) tackifier resins, which can induce entanglement of rubber compounds, were researched as a processing aid to solve the bleeding problem. Liquid butadiene rubbers have significantly reduced extraction loss by crosslinking with the main rubber chain. They have also increased the abrasion resistance and showed similar or better mechanical and dynamical properties against HA oils. However, resin compounds did not show differences in extraction loss compared to HA oil compounds; instead, they showed increased wet traction.

• 한국염색가공학회지
• /
• 제20권3호
• /
• pp.8-17
• /
• 2008

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of turmeric was studied. In this study, the colorants of turmeric were extracted with boiling water. Chitosan-crosslinked cotton fabrics was dyed with aqueous extract of turmeric and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(turmeric) by the chemical linking of chitosan to the cellulose structure. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkably became increased when the crosslinked chitosan concentration was higher. Dyeability of turmeric was improved on chitosan-crosslinked cotton fabric rather than only cotton fabric, while the saturated dyeing time was 20minutes at $60^{\circ}C$. The hue value indicated greenish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was almost the same.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.86-92
• /
• 2015

p-DCPD were prepared by in-suit ROMP polymerization using $MoCl_5$ and $Et_2AlCl$. The results showed that $MoCl_5:Et_2AlCl:DCPD$ mole ratio of 1:2.0:350 had the curing-time of 60sec and crosslinking degree of 90.44%. The curing time of DCPD polymerization by $MoCl_5/Et_2AlCl$ was shortened, and monomer conversion and crosslinking degree were decreased with temperature and the number of moles of $MoCl_5$ and $Et_2AlCl$. $MoCl_5$ and $Et_2AlCl$ is damaged its function by the reaction with the air in the atmosphere and did't proceed the polymerization properly.

• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.260-266
• /
• 2008

Recently there has been a growing interest in the use of natural dyes in textile applications. Natural dyes can exhibit better biodegradability and generally have a higher compatibility with the environment. In this study, the colorants of clove were extracted with boiling water. Chitosan crosslinked cotton fabrics have been dyed with aqueous extract of clove and their dyeabilities on the fabrics were studied. Additionally the fastness to washing and light, and the effects on antimicrobial properties were also investigated. Cotton fabrics were treated with a crosslinking agent epichlorohydrin in the presence of chitosan to provide the cotton fabrics the dyeing properties of natural dye(clove) by the chemical linking of chitosan to the cellulose structure. This process was applied by means of the conventional mercerizing process. The chitosan finishing and durable press finishing of the cotton fabrics occurred simultaneously in the mercerization bath. The dyeability(K/S), which was obtained by CCM observation, remarkablely became increased when the crosslinked chitosan concentration was higher. The hue value indicated reddish yellow with increasing the crosslinked chitosan concentration. And the color fastness to washing and light was the almost the same. The chitosan treated cotton fabrics showed very high activities with almost 100% reduction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.157-158
• /
• 2006

A novel nanofabrication process has been developed using two-photon crosslinking (TPC) for the fabrication of three-dimensional (3D) SiCN ceramic microstructures applicable to high functional 3D devices, which can be used in harsh working environments requiring a high temperature, a resistance to chemical corrosion, as well as tribological properties. After sequential processes: TPC and pyrolysis, 3D ceramic microstructures are obtained. However, large shrinkage due to low-ceramic yield during the pyrolysis is a serious problem to be solved in the precise fabrication of 3D ceramic microstructures. In this work, silica nanoparticles were employed as a filler to reduce the amount of shrinkage. In particular, the ceramic microstructures containing 40 wt% silica nanoparticles exhibited relatively isotropic shrinkage owing to its sliding free from the substrate during pyrolysis.