• Macromolecular Research
• /
• 제17권4호
• /
• pp.250-258
• /
• 2009

One-step seeded polymerization was used to prepare $7{\sim}10{\mu}m$ of crosslinked monodisperse spheres with four crosslinking agents using $4.68{\mu}m$ poly(methyl methacrylate)(PMMA) seed particles in aqueous-alcoholic media in the absence of the swelling process. The crosslinking agents used were ethylene glycol dimethacrylate(EGDMA), allyl methacrylate(AMA), 1,6-hexanediol diacrylate(HDDA) and trimethylolpropane trimethacrylate(TMPTMA). The effects of the type and concentration of the crosslinking agents on the swelling, pore size, thermal property of the networks and morphology of the particles were studied. The chemical structures and concentrations of the crosslinking agents affected both the swelling ratio and the porosity of the networks. In addition, the chemistry of the reactive vinyl group and chain length of the crosslinking agents affected the stability of the monodisperse particles of the ultimate morphology.

• 한국응용과학기술학회지
• /
• 제38권1호
• /
• pp.300-308
• /
• 2021

본 연구에서는 3차원 네트워크 폴리아크릴산나트륨 겔의 가교환경을 변화시켜 기계적 강도 및 팽윤거동을 제어하고 그 물성을 평가하는 연구를 진행하였다. 일반적으로 겔 용액의 가교도가 증가함에 따라 3차원 네트워크 겔의 팽윤비는 감소하고 겔의 기계적 강도는 증가한다. 본 연구에서는 3차원 네트워크 겔 상의 가교개수밀도를 산출하여, 겔화 과정에서 가교환경에 의존하는 중합효율 및 가교효율을 확인하였다. 그 결과, 겔 용액에서 단량체와 가교제의 중량비가 동일하더라도 가교환경이 달라지면 실제 제조된 겔 내부의 가교개수밀도가 3.6배 이상 달라질 수 있음을 확인하였다. 본 연구에서 시도한 가교개수밀도 기반 겔 평가 방법을 활용하면 효과적인 VOCs 흡수제로써 3차원 네트워크 겔을 최적화 할 수 있으리라 기대된다.

• 폴리머
• /
• 제35권1호
• /
• pp.66-71
• /
• 2011

현탁중합에 이은 프리델 크래프츠 촉매에 의한 hyper crosslinking 반응 및 hydrolysis반응으로 hydroxyl 반응 관능기를 포함하는 hyper crosslinked polymer particle(HCPP)을 합성할 시, 1) 각 단량체의 함량 변화에 따른 HCPP의 표면 모폴로지, 기공 크기 및 분포도의 변화, 2) hyper crosslinking 반응조건 변화에 따른 HCPP의 BET 비표면적 값의 변화 및 3) $CO_2$ 초임계 건조공정을 이용한 HCPP에서의 미반응 잔류 단량체, 올리고머 및 촉매의 제거 등에 관해 연구하였다. 이번 연구를 통해 초기 HCPP의 합성 시 관찰되었던 고분자 입자 표면의 균열 및 파괴현상은 hyper crosslinking 과정 중에 진행되는 microphase separated domain간의 반응과 깊은 관계가 있음을 관찰하였고, 또한 hyper crosslinking 반응 시 반응온도 반응시간 및 사용 용매의 증가는 HCPP의 BET 비표면적 값의 증가에 기여함을 관찰하였다. 그리고 hyper crosslinking을 유발하는 단량체의 함량변화는 다른 단량체에 비해 HCPP의 BET 비표면적, 기공 크기 및 분포도에 상대적으로 큰 영향을 미침을 확인하였다. 또한 HCPP에서의 미반응 잔류 단량체, 올리고머 등의 제거에 $CO_2$ 초임계 건조공정이 매우 효과적임을 확인할 수 있었고 특히 이 과정에서의 보조용매(메탄올)의 첨가는 잔류촉매(Fe)의 제거에 있어 탁월한 효과를 나타내었다.

• 반도체디스플레이기술학회지
• /
• 제15권1호
• /
• pp.12-16
• /
• 2016

Toluene-free pressure sensitive adhesives were synthesized by using butyl acrylate (BA), 2-hydroxy ethyl acrylate, methyl methacrylate, acrylic acid (AA) as monomers and ethyl acetate as a solvent. The polymerization recipes were designed by changing 1, 3, 5 part per hundreds monomer (phm) of AA content on the basis of 100 BA parts. Two crosslinking agents, ethyl glycol diglycidyl ether (EDGE) and isophorone diisocyanate (IPDI) were added to the synthesized polymers to increase adhesion due to crosslinking. In the measurement of properties, holding power, peel strength, and initial tackiness increased with AA content due to crosslinking between carboxyl group in AA and epoxy group in EDGE and isocyanate group in IPDI. In the comparison of two crosslinking agents, EDGE showed better in the three properties than IPDI by better reaction of epoxy group of EDGE to carboxyl group of AA.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.168-174
• /
• 2010

In this research, an effective method for reducing the fibrillation of lyocell fibers, which are spun from a solution of cellulose in N-methyl morpholine-N-oxide(NMMO), through consecutive chemical treatments. Undried solution-spun cellulosic fiber was firstly treated with 10 to 30 wt% of multifunctional crosslinking agents, such as ethylene glycol poly(3-chloro-2-hydroxypropyl) ether, and then dipped into alkaline solution to introduce epoxy functions. Finally steam condition was applied to occur a chemical crosslinking in order to reduce the fibrillation on the surface of fibers. Fibrillation was also reduced significantly by adding extra $Na_2SO_4$ in NaOH solution. In addition, Antifibrilllated lyocell fibers show the slightly higher dyeability(4 %) to Cibacron Blue without serious reduction of mechanical properties.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.202-206
• /
• 2018

Five solution styrene butadiene rubber/neodymium butadiene rubber (SSBR/NdBR) composites were manufactured using different ratios of SSBR and NdBR. In this study, the composites were reinforced with NdBR and silica to confirm the physical properties of SSBR used for treads of automobile tires and the dispersibility with silica. The morphologies of the rubber composites were observed using field-emission scanning electron microscopy (FE-SEM). The crosslinking behaviors of the composites were tested using a rubber process analyzer (RPA), and the abrasion resistances were tested using a National Bureau of Standards (NBS) abrasion tester. The hardness values, tensile strengths, and cold resistances of the composites were also tested according to ASTM standards. Increased NdBR content yielded composites with excellent crosslinking properties, abrasion resistances, hardnesses, tensile strengths, and cold resistances. The crosslinking point increased due to the double bond in NdBR, thereby increasing the degree of crosslinking in the composites. The NdBR-reinforced composites exhibited excellent abrasion resistances, which is explained as follows. In SSBR, a breakage is permanent because a resonance structure between styrene and SSBR forms when the molecular backbone is broken during the abrasion process. However, NdBR forms an additional crosslink due to the breakdown of the molecular backbone and high reactivity of the radicals produced. In addition, the low glass transition temperature (Tg) of NdBR provided the rubber composites with excellent cold resistances.

• 멤브레인
• /
• 제24권4호
• /
• pp.311-316
• /
• 2014

고농도의 초산수용액을 분리 농축하기 위해 polyacrylonitrile (PAN) 중공사 복합막을 제조한 후 투과증발 분리실험을 통해 제조된 복합막의 분리성능을 확인하였다. 제조된 중공사 복합막의 코팅여부를 알아보고자 SEM 사진을 측정하였으며 코팅두께가 $3.85{\mu}m$로 균일하게 코팅된 것을 확인할 수 있었다. 또한 막의 투과성능평가 실험을 수행한 결과 가교제의 농도와 가교온도가 증가함에 따라 투과도는 감소하고 선택도는 증가하는 경향을 나타내었고, 대표적인 결과로 가교제인 glutaraldehyde 농도 13 wt%, 가교온도 $140^{\circ}C$에서 투과도 $250g/m^2{\cdot}hr$, 선택도 13의 결과를 얻을 수 있었으며, 또 다른 가교제로서 poly (acrylic acid) 농도 9 wt%, 가교온도 $140^{\circ}C$일 때 투과도 $330g/m^2{\cdot}hr$, 선택도 9의 값을 얻을 수 있었다.

• 대한화학회지
• /
• 제65권5호
• /
• pp.320-326
• /
• 2021

본 연구는 콘택트렌즈를 중합 시 사용하는 교차결합제의 구조가 콘택트렌즈의 물리적 특성 및 약물 용출에 미치는 영향을 조사하였다. 4종의 교차결합제를 0.3%와 3%를 각각 사용하여 콘택트렌즈를 제작하였으며 약물은 안약에 사용하는 ofloxacin을 사용하였다. 친수성 교차결합제를 사용한 콘택트렌즈는 함수율과 습윤성이 향상되었으며 친수성 작용기가 많을수록 효과가 크게 나타났다. 약물용출 농도는 친수성이 강한 교차결합제 사용 시 가장 높게 나타났으며 교차결합제의 농도가 높은 콘택트렌즈는 용출되는 약물 농도가 낮고 용출시간은 길어졌다. 콘택트렌즈의 교차결합제 구조는 콘택트렌즈의 성능 향상과 약물 방출조절에 영향을 주었다.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.187-193
• /
• 2017

In this study, the effect of the cure, mechanical properties, and oil resistance of NBR (acrylonitrile-butadiene rubber)/peroxide compounds were investigated for various co-agents. NBR compounds were characterized using a swelling test, a rheometer (MDR), and a compression set test. Mechanical properties were tested with original compounds, heated in air and exposed to the ASTM No.1, IRM 903 oil. NBR compounds were prepared using peroxide as the crosslinking agent. Trimethylolpropane trimethacrylate (TMPTMA), triallyl isocyanurate (TAIC), and 1,2-polybutadiene (HVPBD) were used as co-agents. The NBR compounds containing TMPTMA and HVPBD lowered the scorch time, while the addition of TAIC did not significantly change the scorch time. NBR compounds containing TMPTMA increased the crosslinking density, while the addition of TAIC and HVPBD lowered the crosslinking density. Moreover, the addition of TMPTMA improved the oil resistance of the NBR compound.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제45권1호
• /
• pp.12-16
• /
• 2022

Di-tyrosine photo-crosslinking of silk fibroin (SF) is recently highlighted as a biocompatible hydrogel fabrication process, because this method does not need potentially harmful chemical species. However, the resulting crosslinking density is often insufficient to obtain a mechanically stiff hydrogel unless additional oxygen is provided during the reaction. In this study, we proposed a combinational crosslinking method to form an SF hydrogel via the di-tyrosine photo-crosslinking with riboflavin (photoinitiator) and physical interaction of SF chains. In the UV light-irradiated SF solution, small particles formed and these particles promoted β-sheet formation of SF molecules, resulting in quick gelation. The di-tyrosine photo-crosslinking produced nuclei that might trigger regular assembly of SF molecules in high temperature condition. Conclusively, this process would contribute to a development of biocompatible hydrogel fabrication for biomedical uses of SF hydrogels.