• Advances in concrete construction
• /
• v.14 no.3
• /
• pp.205-214
• /
• 2022

Due to seawater's physical and chemical deterioration effects on concrete structures, it is crucial to investigate the durability of these structures in marine environments. In some conditions, concrete structures are exposed to seawater from the first days of construction or because of the lack of potable water, part of the concrete curing stage is done with seawater. In this research, the effects of exposure to seawater after 7 days of curing in standard conditions were evaluated. To improve the durability of concrete, fly ash has been used as a substitute for a part of the cement in the mixing design. For this purpose, 5, 15, and 30% of the mixing design cement were replaced with type F fly ash, and the samples were examined after curing in seawater. The resistance of concrete against chloride ion penetration based on the rapid chloride penetration test (RCPT), water permeability based on the depth of water penetration under pressure, and water absorption test was done. The changes in the compressive strength of concrete in different curing conditions were also investigated. The results show that the curing in seawater has slightly reduced concrete resistance to chloride ion permeation. In the long-term, samples containing FA cured in seawater had up to 10% less resistance to chloride ion penetration. The amount of reduction in chloride ion penetration resistance was more for samples without FA. Whiles, for both curing conditions in the long-term up to 15%, FA improved the chloride ion penetration resistance up to 40%. Curing in seawater slightly increased the penetration depth of water under pressure in samples containing FA, while this increase was up to 12% for samples without FA. In the long-term the compressive strength of samples cured in seawater is not much different from the compressive strength of samples cured in plain water, while at the age of 28 days, due to seawater salts' accelerating effects the difference is more noticeable.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.45-48
• /
• 2019

Allogenic keratinocyte application is widely used for treatment of second degree burns. However, there is no significant body of report on application of allogenic keratinocyte to third degree burns. A geriatric patient visited our burn center showing second to third-degree burn on dorsum of her left hand. Considering the surface area and wound depth, surgery was indicated but her medical condition and age made the surgery high risk for a long operation. Therefore, chemical escharolysis, serial bedside debridement, and cultured allogenic keratinocyte (Kaloderm^®, Tegoscience, Seoul, Korea) application was done. The wound was completely epithelialized after four rounds of Kaloderm^® application. For third-degree burns where definitive surgical reconstruction is precluded due to medical comorbidity of the patient, we investigated the possibility of allogenic keratinocyte treatment which may allow to avoid high-risk anesthesia and surgery.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.111-120
• /
• 2024

This paper presents a study aimed at developing repair materials for emergency slope stabilization after disasters such as floods. The research assessed how different mix ratios of fly ash and reinforcement with basalt fibers affect the basic quality properties of mortars. Optimal amounts of fly ash were selected based on these properties, and appropriate amounts of chemical admixtures and thickeners were determined to enhance the quality attributed to the basalt fiber mixture. Notably, high-volume fly ash reduced the need for high-performance water reducers and improved workability, known benefits that also helped mitigate fiber ball issues in conjunction with the effects of thickeners. The experimental results indicated that the developed repair materials could potentially be used for emergency repairs, with a focus on initial age strength. This research aims to provide foundational data for repair materials used in future emergency slope stabilizations.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.123-136
• /
• 2024

This study aimed to assess the mobility and thermal comfort of personal protective equipment (PPE) among female healthcare workers, taking into account wearers' physique and PPE protection levels. A total of 16 participants (age: 26.3 ± 8.3 y, height: 161.5 ± 7.3 cm, body weight: 57.1 ± 11.0 kg, BMI: 21.9 ± 3.6), representing diverse body types, underwent four PPE conditions: L (Low_Plastic gown ensemble), M (Medium_Tyvek 400), H (High_Tyvek 800J with Powered Air Purifying Respirator [PAPR]), and E (Extremely high_Tychem 2000 with PAPR, Bib apron, and Chemical-resistant gloves). The mobility protocol consisted of 10 different tasks in addition to donning and doffing. The 10 tasks were repeated twice at an air temperature of 24.3 ± 0.1℃, 59±4%RH. Findings revealed a disproportionate relationship between PPE protection and wearer discomfort. Significant differences in clothing microclimate and total sweat rate were observed between the lowest (L) and highest (E) protection levels (p < 0.01), while distinctions among medium levels were inconclusive. Subjective evaluations favored conditions H and L over M and E (p < 0.05), indicating reduced heat, and humidity, increased comfort, and lower exertion. Instances of mobility discomfort, specially in the small body type group, underscored the need for a suitable PPE size system for Korean adult female medical workers. Furthermore, enhancements in gloves, shoe cover, and PAPR hood designs are essential for improving ease of movement and preventing hindrance.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.108-119
• /
• 2024

Purpose: The incidence of deep vein thrombosis (DVT) following total hip arthroplasty (THA) without chemoprophylaxis could be as high as 50% in Caucasians. However, according to several subsequent studies, the incidence of venous thromboembolic events (VTE) in Asians was much lower. The routine use of chemoprophylaxis, which could potentially cause increased bleeding, infection, and wound complications, has been questioned in low-incidence populations. The objective of this study is to determine the incidence of VTE after primary THA without chemoprophylaxis in an Asian population using a fast-track rehabilitation protocol and to verify the safety profile for use of 'mechanical prophylaxis alone' in patients with standard risk of VTE. Materials and Methods: This is a retrospective cohort study of 542 Hong Kong Chinese patients who underwent primary THA without chemoprophylaxis. All patients received intermittent pneumatic compression and graduated compression stockings as mechanical prophylaxis. Multimodal pain management was applied in order to facilitate early mobilisation. Routine duplex ultrasonography was performed between the fourth and seventh postoperative day for detection of proximal DVT. Results: All patients were Chinese (mean age, 63.0±11.9 years). Six patients developed proximal DVT (incidence rate, 1.1%). None of the patients had symptomatic or fatal pulmonary embolism. Conclusion: The incidence of VTE after primary THA without chemical prophylaxis can be low in Asian populations when following a fast-track rehabilitation protocol. Mechanical prophylaxis alone can be regarded as a reasonably safe practice in terms of a balanced benefit-to-risk ratio for Asian patients with standard risk of VTE.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.749-760
• /
• 2022

Omics-driven synthetic biology is a multidisciplinary research field that creates new artificial life by employing genetic components, biological devices, and engineering technique based on genetic knowledge and technological expertise. It is also utilized to make valuable biomaterials with limited production via current organisms faster, more efficient, and in huge quantities. As the bioeconomic age begins, and the global synthetic biology market becomes more competitive, investment in research and development (R&D) and associated sectors has grown considerably. By overcoming the constraints of present biotechnologies through the merging of big data and artificial intelligence technologies, huge ripple effects are envisaged in the pharmaceutical, chemical, and energy industries. In agriculture, synthetic biology is being used to solve current agricultural problems and develop sustainable agricultural systems by increasing crop productivity, implementing low-carbon agriculture, and developing plant-based, high-value-added bio-materials such as vaccines for diagnosing and preventing livestock diseases. As international regulatory debates on synthetic biology are now underway, discussions should also take place in our country for the growth of bioindustries and the dissemination of research findings. Furthermore, the system must be improved to facilitate practical application and to enhance the risk evaluation technology and management system.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.185-197
• /
• 1995

Tungsten skarns in the Chungju mine which consists mainly of strata-bound type iron ore deposits are found in the vicinity of the contact between the age-unknown Kyemeongsan Formation and granitic rock intrusions of Mesozoic age($134{\pm}2Ma$). Tungsten skarns were formed extensively from alumina and silica-rich schistose rocks by the introduction of calcium and iron from hydrothermal solution. The skarns comprise a metasomatic column and are subdivided into four facies; garnet facies, wollastonite facies, epidote facies and chlorite facies. The skarn process in time-evolutional trend can be divided broadly into the four facies in terms of the paragenetic sequence of calc-silicates and their chemical composition. Skarn and ore minerals were formed in the following sequence; (1) garnet facies, adjacent to biotite granite, containing mainly garnet(>Ad96) and magnetite, (2) wollastonite facies containing mainly wollastonite and garnet(Ad95~60), (3) epidote facies, containing mainly epidote(Ps35~31), quartz, andradite-grossular(Ad63~50), and scheelite, (4) chlorite facies, adjacent to and replacing schist, containing mainly chrolite, muscovite, quartz, calcite, epidote(Ps31~25), hematite and sulfides. The mineral assemblage and mineral compositions. suggest that the chemical potentials of Ca and Fe increased toward the granitic rock, and the component Al, Mg, K, and Si decreased from the host rock to granitic rock. The homogenization temperature and salinity of fluid inclusion in scheelite, quartz and epidote of epidote facies skarn is $300-400^{\circ}C$ and 3-8wt.% eqiv. NaCl, respectively. ${\delta}^{34}S$ values of pyrite and galena associated with chlorite facies skarn is $9.13{\sim}9.51%_{\circ}$ and $5.85{\sim}5.96%_{\circ}$, respectively. The temperature obtained from isotopic com· position of coexisting pyrite-galena is $283{\pm}20^{\circ}C$. Mineral assemblages and fluid inclusion data indicate that skarn formed at low $X_{CO_2}$, approximately 0.01. Temperature of the skarn mineralization are estimated to be in the range of $400^{\circ}C$ to $260^{\circ}C$ and pressure to be 0.5 kbar. The oxygen fugacity($fo_2$) of the skarn mineralization decreased with time. The early skarn facies would have formed at log $fo_2$ values of about -25 to -27, and late skarn facies would have formed at log $fo_2$ values of -28 to -30. The estimated physicochemical condition during skarn formation suggests that the principal causes of scheelite mineralization are reduction of the ore·forming fluid and a decrease in temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.618-625
• /
• 2018

With the passing of time, exposed concrete structures are affected by a range of environmental, chemical, and physical factors. These factors seep into the concrete and have a deleterious influence compared to the initial performance. The importance of identifying and preventing further performance degradation due to the occurrence of deterioration has been greatly emphasized. In recent years, evaluations of the target life have attracted increasing interest. During the freezing-melting effect, a part of the concrete undergoes swelling and shrinking repeatedly. At these times, chloride ions present in seawater penetrate into the concrete, and accelerate the deterioration due to the corrosion of reinforced bars in the concrete structures. For that reason, concrete structures located onshore with a freezing-melting effect are more prone to this type of deterioration than inland structures. The aim of this study was to develop a high performance mortar mixed with a mineral admixture for the durability properties of concrete structures near sea water. In addition, experimental studies were carried out on the strength and durability of mortar. The mixing ratio of the silica fume and meta kaolin was 3, 7 and 10 %, respectively. Furthermore, the ultra-fine fly ash was mixed at 5, 10, 15, and 20%. The mortar specimens prepared by mixing the admixtures were subjected to a static strength test on the 1st and 28th days of age and degradation acceleration tests, such as the chloride ion penetration resistance test, sulfuric acid resistance test, and salt resistant test, were carried out at 28 days of age. The chloride diffusion coefficient was calculated from a series of rapid chloride penetration tests, and used to estimate the life time against corrosion due to chloride ion penetration according to the KCI, ACI, and FIB codes. The life time of mortar with 10% meta kaolin was the longest with a service life of approximately 470 years according to the KCI code.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.451-459
• /
• 2011

We investigated melting points and sensory characteristics by adding rice bran and roasted soybean to the finishing diet of Hanwoo steers. Thirty-six Hanwoo steers (average age, 20.92 mon-old; average weight, 599.89 kg) were assigned to either Control, Treatment 1 (rice bran) or Treatment 2 (roasted soybean) groups (12 steers/group), considering body weight and age. Supplementation levels of rice bran and roasted soybean were determined to meet total 5% crude fat in the concentrates, and the experimental animals were fed for 314 d until they reached 31.2 mon old. No significant differences were found in the moisture and crude fat content among groups. Melting points of lipid extracted from M. longissimus dorsi, subcutaneous fat, and perirenal fats were 25.83-26.17, 17.26-18.53 and $32.40-33.15^{\circ}C$, respectively, resulting in remarkable differences depending on fat depots. Contents of free amino acids in M. longissimus dorsi related to sweet taste were 39.48 mg/100 g for Treatment 1, which was significantly (p<0.05) higher than those for Control (32.24 mg/100 g), whereas those related to bitter taste were 25.93 mg/100 g for Treatment 2, which was the lowest (p<0.05) among the groups. Fatty acid composition, such as $C_{14:0}$, $C_{16:0}$, $C_{16:1}$, $C_{18:0}$, and $C_{18:1}$, in M. longissimus dorsi was not different among the groups. Results of a panel test on M. longissimus dorsi showed that Treatment 1 scored the highest (p<0.05) in juiciness, and both Treatments 1 and 2 scored higher (p< 0.05) in overall palatability than the Control group. $C_{18:1}$ showed a positive (+) relationship with tenderness (r = 0.650; p<0.05), and $C_{18:0}$ with flavor (0.698; p<0.05). The results suggest that rice bran and roasted soybean are beneficial for improving M. longissimus dorsi sensory characteristics, whereas no significant differences were found in the physico-chemical characteristics among the groups.

• Korean Journal of Microbiology
• /
• v.45 no.2
• /
• pp.91-98
• /
• 2009

Infectious bursal disease (IBD) caused by the infectious bursal disease virus (IBDV) has an important economic impact on the poultry industry worldwide. This study examined the adjuvant effects of a plasmid encoding chicken interleukin-6 (pcDNA-ChIL-6) and levamisole (LMS) on in ovo prime-boost vaccination using a genetic vaccine (pcDNA-VP243) to prime in chicken followed by a killed-vaccine boost. A pcDNA-VP243 was injected into the amniotic sac alone or in combination with a pcDNA-ChIL-6 or LMS at embryonation day 18, followed by an intramuscular injection of killed IBD vaccine at 1 week of age. The chicken were orally challenged with very virulent IBDV (vvIBDV) strain at 3 weeks of age and observed for 10 days. No mortality was observed in the groups that received the pcDNA-VP243 alone and pcDNA-VP243 plus pcDNA-ChIL-6 or LMS compared to 100% mortality in unvaccinated challenge control group. However, as determined by bursal damage (the presence of IBDV RNA, B/B ratio, and lesion score), a pcDNA-VP243 alone group was superior to pcDNA-VP243 plus pcDNA-ChIL-6 or LMS groups in the protection against post-challenge. These findings suggest that in ovo priming with genetic vaccine and boosting with killed vaccine is an effective strategy for protecting chicken against vvIBDV and the addition of pcDNA-ChIL-6 or LMS did not enhance protective immunity.