• Journal of Korean Library and Information Science Society
• /
• v.11
• /
• pp.69-99
• /
• 1984

A dramatic development in the new technology of copying materials has presented us with massive problems on reconciling the conflicts between copyright owners and potential users of copyrighted materials. The adaptation to this changing condition led some countries to revise their copyright laws such as in the U. S. in 1976 and in Korea in 1984 for merging with the international or universal copyright conventions in the future. Copyright defined as exclusive rights given to copyright owners aims to secure a fair return for an author's creative labor and to stimulate artistic creativity for the general public good. The exclusive rights on copyrightable matters, generally for reproduction, preparation of derivative works, public distribution, public performance, and public display, are limited by fair use for scholarship and criticism and by library reproduction for its preservation and interlibrary loan. These limitations on the exclusive rights are concerned with all aspects of library services and cause a great burden on librarian's daily duty to provide balance between the rights of creators and the needs of library patrons. The fair use as one of the limitations on it has been coupled with enormous growth of a new technology and extended from xerography to online database systems. The implementation of the fair use and library reprography in Korean law to the local practices is examined on the basis of the new American copyright act of 1976. Under the draft revision of Korean law, librarians will face many potential problems as summarized below. 1. Because the new provision of 'life time plus 50 years' will tie up substantial bodies of material longer than the old law, until that date librarians would need permissions from the owners and should pay attention to the author's death date. 2. Because the copyright can be sold, distributed, given to the heirs, donated, as a whole or a part, librarians should chase down the heirs and other second owners. In case of a derivative work, this is a real problem. 3. Since a work has its protection from the moment of its creation, the coverage of copyrightable matter would be extended to the published or the unpublished works and librarian's work load would be heavier. Without copyright registration, no one can be certain that a work is in the public domain. Therefore, librarians will need to check with an authority. 4. For implementation of limitations on exclusive rights, fair use and library reproduction for interlibrary loan, there can be no substantial aggregate use and there can be no systematic distribution of multicopies. Therefore, librarians should not substitute reproductions for subscriptions or purchases. 5. For the interlibrary loan by photocopying, librarians should understand the procedure of royalty payment. 6. Compulsory licenses should be understood by librarians. 7. Because the draft revision of Korean law is a reciprocal treaty, librarians should take care of other countries' copyright law to protect foreign authors from Korean law. In order to solve the above problems, some suggestions are presented below. 1. That copyright clearinghouse or central agency as a centralized royalty payment mechanism be established. 2. That the Korean Library Association establish a committee on copyright. 3. That the Korean Library Association propose guidelines for each occasion, e.g. for interlibrary loan, books and periodicals and music, etc. 4. That the Korean government establish a copyright office or an official organization for copyright control other than the copyright committee already organized by the government. 5. That the Korean Library Association establish educational programs on copyright for librarians through seminars or articles written in its magazines. 6. That individual libraries provide librarian's copyright kits. 7. That school libraries distribute subject bibliographies on copyright law to teachers. However, librarians should keep in mind that limitations on exclusive rights are not for an exemption from library reprography but as a convenient access to library resources.

• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.560-571
• /
• 2006

The purpose of this study was to determine composition of food groups appropriate for the evaluation of the quality of total diet or food guide, using the data from the 1998 National Health and Nutrition Survey. Twenty-four-hour-dietary recalls of total 1,110 Korean adolescents aged 13 - 19 years (male 543, female 567) were analyzed for food group consumed (Dietary Diversity Score, DDS), intake patterns of food group, mean index of nutritional quality (mINQ) and nutrient adequacy ratio (NAR). Considering Korean food pattern different from the Americans, this study is to check if Korean 5 food groups with both of oil & sugar group and vegetable & fruit group, and a minimum amount of 30 g in grain group and 15 g in meat group modified from Kant's minimum amount, 15 g in grain and 30 g in meat, could also be appropriate for the diet evaluation of Korean adolescents. Combination of food group and minimum food intake per each food group used in the first trial were categorized into 6 kinds of types: 1) American 5 food groups with Kant's minimum amount as control or 2) American 5 food groups with modified Kant's minimum amount 3) Korean 5 food groups excluded by sugar with the modified amount 4) Korean 5 food groups with modified amount 5) American food groups added oil group with the modified amount 6) American food groups added oil & sugar group with the modified amount. In case of oil group or oil and sugar group, 5 g was quoted for the minimum amount. Correlation between DDS and indices of other diet quality in each type of food group composition were analyzed and the best food group composition was traced by comparing the correlation coefficients of DDS and mINQ or MARs at ${\alpha}\;<\;0.01$. There was no meaningful difference in weight length index of the subjects of eating or not-eating oil or oil & sugar, while the values of mINQ showed higher in the subjects eating oil but no difference in the subjects eating oil & sugar, compared to the group not-eating, respectively. In comparison of type 1 and type 2, correlation between DDS and indices of other diet quality showed higher in type 1 using Kant's amount. And comparing the type of a combined group of fruit & vegetable (type 3 and 4) and the type of separated group of fruit and vegetable (type 5 and 6). six groups of separated vegetable and fruit showed the higher correlation of DDSs and indices of diet quality. In case of being classified into six groups with oil, DDS showed correlation of r = 0.293 with INQ. While, being classified into six groups with oil & sugar instead of oil only, DDS showed correlation of r = 0.249 with INQ. Accordingly the type 5 with oil is regarded as the better food group type than the type 6 with oil & sugar. Since better result was shown in the composition of six groups with Kant's minimum amount, the comparative analysis on both of type1 with oil and oil & sugar was finally performed. Then oil added type 1 showed higher correlation of DDS and indices of diet quality. These result indicated that it would be more appropriate to use six food groups with separate vegetable and fruit including oil group (oil-added type 1) rather than oil & sugar group for evaluation of dietary quality of Korean adolescents using DDS.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.5
• /
• pp.103-118
• /
• 2018

This study would provide the basic data informative for establishing a VMD strategy, covering design and marketing for business owners and prospective entrepreneurs, including the persons concerned with the food and beverage industries by investigating the relationships of the impacts of several factors in the cognitive dimension factors of VMD in food and beverage stores on consumers' emotional response and behavior intention and the mediating effect of emotional responses, applying the concept of VMD to the food and beverage industries. To check this research purpose, data were collected through a survey, conducted with various consumers in their 20s through 60s who have experienced the use of food and beverage stores. The period of the survey was from September 20 through October 10, 2017, 202 copies of questionnaires were collected without missing values and used as data for the final analysis. As for the analysis of the data, using SPSS statistical software, frequency analysis and descriptive statistics, analysis of reliability and validity, correlation analysis, single and multiple regression analysis were conducted. According to the results of this study, first, the relationship of the impact between the VMD cognitive dimension of food and beverage stores and customers' emotional responses was statistically significant. In concrete, all factors of VMD cognitive dimension, including the factors of suitability and daily escape had positive (+) impacts on positive emotions. Second, as a result of an analysis of the impact of emotional responses felt in the process of visiting the food and beverage stores on customers' behavior intention, it turned out that positive emotions had a positive (+) impacts on visit intention and recommendation intention while negative emotions did not have any impacts on visit intention and recommendation intention. Third, as a result of an analysis of the impact of VMD cognitive dimension on behavior intention, the suitability and balance of the VMD cognitive dimension had positive (+) impacts on visit intention while daily escape and functionality had positive (+) impacts on recommendation intention. Fourth, as a result of checking if emotional responses had a mediating effect in the relationship between the VMD cognitive dimension and behavior intention, positive emotions had a full mediating effect while there was no mediating effect of negative emotions between the VMD cognitive dimension and behavior intention. In conclusion, this study found that the VMD cognitive dimension of food and beverage stores affected consumers' emotional responses and that emotional responses were a factor affecting behavior intention and proved that consumers' emotional responses differed depending on the factors in the cognitive dimension. Thus, in food and beverage stores, it would be necessary to make effective designs of the stores and differentiate the presentation of them through utilizing detailed factors of the cognitive dimension of VMD. Also, the results of this study could be utilized as the appropriate marketing tools for customers in food and beverage stores and as the basic data for establishing the strategy.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.48-53
• /
• 2013

Monte Carlo method has been known as the most accurate method for calculating absorbed dose in the human body, and an anthropomorphic phantom has been mainly used as a method of simulating internal organs for using such a calculation method. However, various efforts are made to extract data on several internal organs in the human body directly from CT DICOM files in recent Monte Carlo calculation using Geant4 code and to use by converting them into the geometry necessary for simulation. Such a function makes it possible to calculate the internal absorbed dose accurately while duplicating the actual human anatomical structure. Thus, this study calculated the absorbed dose in the human body by using Geant4 associating with DICOM files, and aimed to confirm the usefulness by compare the result with the measured dose using a Gafchromic EBT2 film. This study compared the dose calculated using simulation and the measured dose in beam central axis using the EBT2 film. The results showed that the range of difference was an average of 3.75% except for a build-up region, in which the dose rapidly changed from skin surface to the depth of maximum dose. In addition, this study made it easy to confirm the target absorbed dose by internal organ and organ through the output of the calculated value of dose by CT slice and the dose value of each voxel in each slice. Thus, the method that outputs dose value by slice and voxel through the use of CT DICOM, which is actual image data of human body, instead of the anthropomorphic phantom enables accurate dose calculations of various regions. Therefore, it is considered that it will be useful for dose calculation of radiotherapy planning system in the future. Moreover, it is applicable for currently-used several energy ranges in current use, so it is considered that it will be effectively used in order to check the radiation absorbed dose in the human body.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.213-220
• /
• 2014

This is the study to conduct the topographical analysis using the orthophotographic data from the waypoint flight using the UAV and constructed the system required for the automatic waypoint flight using the multicopter.. The results of the waypoint photographing are as follows. First, result of the waypoint flight over the area of 9.3ha, take time photogrammetry took 40 minutes in total. The multicopter have maintained the certain flight altitude and a constant speed that the accurate photographing was conducted over the waypoint determined by the ground station. Then, the effect of the photogrammetry was checked. Second, attached a digital camera to the multicopter which is lightweight and low in cost compared to the general photogrammetric unmanned airplane and then used it to check its mobility and economy. In addition, the matching of the photo data, and production of DEM and DXF files made it possible to analyze the topography. Third, produced the high resolution orthophoto(2cm) for the inside of the river and found out that the analysis is possible for the changes in vegetation and topography around the river. Fourth, It would be used for the more in-depth research on landscape analysis such as terrain analysis and visibility analysis. This method may be widely used to analyze the various terrains in cities and rivers. It can also be used for the landscape control such as cultural remains and tourist sites as well as the control of the cultural and historical resources such as the visibility analysis for the construction of DSM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4425-4433
• /
• 2011

The purpose of this study was to explore the relation of BMI, smoking and drinking with biomedical parameters in 20s and 30s men. This was a retrospective exploratory study and the subjects were 603 men who participated in health check-up for clinical trial at a tertiary hospital between October 2006 and June 2011. RBC, hemoglobin(Hb), hematocrit(Hct), triglyceride(TG), uric acid(UA), ALT in obese group were significantly higher than those of normal weight group. WBC and Hb in smokers were significantly higher than those of nonsmokers, protein in smokers was significantly lower than that of nonsmokers. Platelet in moderate smokers who smoke 10~19 cigarettes a day was significantly higher than that of nonsmokers and light smokers who smoke below 10 cigarettes a day, albumin in moderate smokers was significantly lower than that of nonsmokers and light smokers. TG in moderate smokers was significantly higher than that of nonsmokers, and blood glucose(BG) in moderate smokers was significantly lower than that of nonsmokers. AST and ALT in drinkers who drink over 10g a day were significantly higher than those of nondrinkers. In regression, BMI was significant factors of increasing RBC, Hb, Hct, total cholesterol(TC), TG, BG, UA, AST and ALT. Smoking amount was significant factors of increasing WBC, Hb, Hct and TG, and was significant factors of decreasing BG and Ca. Smoking amount was significant factors of increasing TC, AST and ALT, and was significant factors of decreasing WBC. In conclusion, there was significant relations of BMI, smoking, and drinking with biomedical parameters such as Hb, TC, TG, and ALT in young-aged men. Therefore, practice of healthy lifestyle activities to include preventing obesity and heavy drinking, and quitting smoking needs to the 20s and 30s men for preventing lifestyle disease.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.4
• /
• pp.111-117
• /
• 2007

The visual evoke potential(VEP) is the effective method to diagnose and treat the amblyopia or to check the infants visual ability. In order to evaluate the changes of P100 latencies and amplitudes of VEP by intensity of illumination and refractive errors, we measured latencies and amplitudes of 41 normal adults (20/20 VA) who have no ocular diseases and neurologic diseases. The results were as follows: In the scotopic condition, the latencies were N75$75.83{\pm}3.69$ msec, P100$103.48{\pm}5.34$ msec, the P100 amplitude was $14.86{\pm}2.43$ msec, and in the photopic condition, the latencies were N75$76.71{\pm}3.11$ msec, P100$107.26{\pm}5.54$ msec and the P100 amplitude was $10.35{\pm}1.75$ msec. The latencies and amplitudes of P100 in the photopic condition had higher values than those in the scotopic condition and the measures were significantly different between the scotopic and photopic condition (p<0.01). The P100 latencies were delayed both in the scotopic and photopic condition with the refractive errors and those measures were delayed more than in the photopic condition. The P100 amplitudes in the induced myopic and hyperopic conditionsreduced than in the emmetopes in both illumination conditions. The P100 latencies and amplitudes in emmetropes showed a correlation with the induced myopic conditions in the scotopic condition. Those results showed that P100 latencies and amplitudes are dependent on the illumination conditions and refractive errors. And we suggest that those results would be useful to determine and evaluate the normal range for the person considering patients' refractive errors and illumination of the test room.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.117-124
• /
• 2009

The purpose of the study was to improve quality of high volume fly ash concrete. The study evaluated on the possibility of early quality improvement of high volume fly ash concrete with early strength gain admixture ('GA' below) developed by the preceding research. The study regarded applying naphthalene admixture ('NA' below) to mix proportion substituting FA 15 % to be plain. In the event of substituting FA 20, 25 and 30 %, the study compared engineering properties of concrete with plain by applying GA. Because of features of fresh concrete, fluidity falls down when GA is applied. Therefore, its use amount shall be increased. Only, in W/B 60 %, it was beneficial since slump loss was reduced about 35~70 mm than plain. The study could see that AE use should be increased proportionally since air content was reduced by coming from AE absorption operation of unburned coal content included in FA according to an increase in the amount of FA use. Reduction effect of bleeding could be anticipated since the amount of bleeding appeared at least in FA 20 %. Because of hardened concrete, time of setting appeared in the same level as plain when GA was applied. Therefore, it is judged that delay of setting can be reduced. In compressive strength, the study could check the same strength development as plain when GA was applied, having nothing to do with W/B and curing temperature. However, it is thought that we shall pay attention to GA use in the event of FA 30 % substitution. Freezing and melting resistance had less early value than plain. However, it is judged that there will be no problem of frost resistance since there is no a large difference between freezing and melting resistance and plain in overall. In accelerated neutralization, it was analyzed that a problem of weakening in neutralization appointed as a demerit when FA was applied in mass in proportion with GA use could be settled to some extent.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.257-290
• /
• 2005

Korean energy use in industrial sector has increased more rapidly than other sectors during 1980~2000 periods. Relatively higher increases in industrial sector energy consumption raise questions whether government policy of rationalization of industrial energy use has been effective. In this study, we use 80-85-90 and 90-95-00 constant price input-output table to analyze increases in industrial energy use. Using an adjusted version of structural decomposition model introduced by Chen and Rose (1990), we decompose Changes of energy use into 17 elements. We classify entire industry sector into 32 sectors including four energy sectors (coal and coal products, refined petroleum, electricity and town gas). We then analyze changes of energy use by industrial level to check differences among industrial energy demand structures. Finally, we compare three industries, electronic product manufacturing, metal manufacturing and construction, that represent technology and capital intensive, energy and material intensive and labor and capital intensive industry. As results, we find that high energy using industries make the most effort to reduce energy use. Primary metal, petrochemical and mon-metal industries show improvements in elements such as energy and material productivity, energy and material imports, energy substitution and material substitutions towards energy saving. These results imply that although those industries are heavy users of energy, they put the best effort to reduce energy use relative to other industries. We find various patterns of change in industrial energy use at industrial level. To reduce energy use, electronic product manufacturing industry needs more effort to improve technological change element while construction industry needs more effort to improve material input structure element.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.