• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1146-1148
• /
• 2007

This paper proposes a method to improve the charging speed and discharging performance of a high voltage capacitor used in a portable medical device. The improvement of the charging speed was achieved by duty cycle control. The discharging performance was carried out by varying the phase duration and the leading edge voltage of the output according to the transthoracic impdedance of the patient. As a result, the improvement in the charging speed and the performance of the discharging parameters shorten the patient treatment time.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.431-437
• /
• 2022

This study proposes a converter that makes battery charging, discharging, and zero voltage control possible. The proposed topology consists of an LLC converter and a half-bridge inverter, and all power semiconductor devices are applied Si-MOSFETs. The topology is designed with an LLC switching frequency of 100 kHz, a half-bridge inverter switching frequency of 50 kHz, and a battery voltage of 5 V. The advantages of the charging/discharging operation of the 5 V battery voltage and the zero voltage control of the battery are verified. In addition, by using a two-stage topology, the battery can be charged, discharged through current control, and discharged to zero voltage. With the proposed topology, the current can be maintained even when the battery voltage drops to zero.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.62-69
• /
• 1994

This study was designed to seek information on the heat charging and discharging characteristics of a multi-capsule type LTES(Latent Heat of Fusion Thermal Energy Storage) system, and especially prediction equation of outlet water temperature from the system. During heat charging process, the water temperature in the LTES tank increased very slowly in comparison with a predicted one and was kept near the melting point of the PCM for about 25 minutes. During heat discharging process, the latent heat discharging period of the outlet water temperature became longer as the inlet water temperature became higher and/or mass flow rate became lower. The dimensionless temperature of the outlet water was predicted by linking three equations of ${\theta}=1.1Exp(-{\tau}/0.82)$, ${\theta}=-0.06{\tau}+0.3$, ${\theta}=0.8Exp(-{\tau}/1.4)$ ($r^2{\leq}0.88$) depending on discharging period regardless of mass flow rates on the case of the inlet water temperature at $21.5^{\circ}C$.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.551-557
• /
• 2021

전기자동차의 증가에 따라 공공장소의 전기자동차 충방전 기반시설 또한 급격히 늘어나고 있다. 전기자동차의 충방전을 위해서는 보안상의 취약점을 최소화하기 위해 전기자동차와 서비스 제공자가 서로의 신원을 확인하는 상호인증과정 후에 층방전 서비스를 시작하여야 한다. 본고에서는 해쉬함수와 메시지 인증코드를 사용하여 전기자동차와 충방전 서비스 제공자간의 양방향 인증 방법을 제안한다. 그리고 효율적인 충방전 시스템의 운영에 대해 기술한다. 제안된 시스템은 외부로 부터의 공격에 강한 내성을 가지며 충방전 서비스 이용자의 개인정보를 효과적으로 보호할 수 있다.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.669-681
• /
• 2021

As the supply of xEV in Korea is rapidly increasing, the amount of waste batteries is expected to increase rapidly, but the current recycling system for waste xEV batteries is very insufficient. In order to properly utilize the xEV reusable battery module, it is essential to classify it into a type that has similar discharge characteristics to the current state of health(SOH), which is the discharge capacity of the battery. This paper proposes a system that can minimize the exchange of energy with the KEPCO system by using the charging/discharging method by circulating power between batteries in order to minimize the power consumption when charging and discharging waste batteries. In the proposed system, a function to measure parameters during the charging/discharging test of the waste battery was implemented to build a customized big date for the test waste battery. In addition, the dynamic characteristics of the proposed circuit were analyzed using PSIM, which is useful for power electronics analysis, and the validity of the proposed circuit was verified through experiments.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.330-335
• /
• 2017

Increased fossil fuel consumption causes global warming, environmental pollution, and abnormal climate change. Wind-generated power installation is proposed to solve this problem. Recently, the wind power plant construction case encourages the installation of the energy storage system (ESS) to improve the intermittency of wind power. The maximized ESS operation profits connected to wind power are not generated in the simplest operation pattern of charging at night and discharging at day. The battery charging efficiency improvement should be considered to get more profits. Thus, there is a possibility of increasing ESS operation profits by analyzing the battery AC and DC charging/discharging efficiency and the yearly average sealed maintenance free (SMP) in hours. In this paper, the battery impedance characteristic, AC and DC charging/discharging efficiency, and the yearly average SMP are analyzed. The operation scenario to improve the ESS battery charging efficiency connected to wind power is proposed and verified via simulation.

• 에너지공학
• /
• 제29권3호
• /
• pp.64-73
• /
• 2020

본 논문은 전기 자동차의 충·방전 장소를 고려한 도시별 일부하 곡선 산출을 위한 방법론을 제시하였다. 즉, 특정 도시에서 전기 자동차 충·방전에 의해 발생되는 부하량이 전력 그리드에 미치는 영향을 용이하게 파악할 수 있도록 전기 자동차의 충·방전 장소를 고려한 도시별 일부하 곡선 산출 알고리즘을 제시하였다. 구체적으로는 PEVs 점유율 시나리오에 따라 도시내의 전기차 충·방전 장소별 즉, 직장 및 가정에 대하여 오전에 직장에 도착한 전기차에 대해 그리드에 방전을 그리고 오후에 가정에 도착한 전기차에 대해 충전을 시행하는 가정을 수립한 후 오전 직장 도착 차량운행 특성과 SMP 요금제를 동시에 반영한 PEVs 방전 전력을 산정하였다. 그리고 오후에 가정 도착 차량운행 특성과 TOU 요금제를 동시에 고려한 PEVs충전 전략에 대해 각각 서울시를 대상으로 충·방전 전력 형태별로 일부하곡선을 산출한 후 기존 부하와 합산하여 그리드에 미치는 영향 평가를 비교 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.82-86
• /
• 2004

In this paper, a cycler system for the Lithium-Polymer battery with the large capacity of 120Ah is presented. This system is constituted as the two units for the charging and discharging. The Lithium-Polymer battery should be charged in CC and CV mode, and it is required a very high precision control of the voltage and current for the charging unit. To decrease the switching noises and harmonics, parallel operation method is adopted and utilized in the power conversion module. The discharging unit has a link AC system function to return the discharging energy of battery to AC line and has comparatively less thermal loss. These units are designed to be controlled and monitored by personal computer. The total system for the battery charging and discharging is described and presented.

• 자동차안전학회지
• /
• 제10권2호
• /
• pp.36-42
• /
• 2018

UNECE/WP29/GRPE/EVE has recently defined that the power of a hybrid electric vehicle is the system power. Although a method for measuring the maximum power of a hybrid electric vehicle is presented by KATRI, it does not consider charging and discharging characteristics of traction batteries. This study provides a maximum power measurement method which reflects the charging and discharging characteristics of traction batteries in NOVC-HEVs (Not Off Vehicle Charging-Hybrid Electric Vehicles). Both methods are compared with regard to the output measurement results.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.67-73
• /
• 2007

본 연구에서는 특정 자동차에 대한 Charging 시스템의 적합성 여부를 판별할 수 있는 충방전 Balance 시뮬레이터의 Prototype을 개발 하였다. 차량운전 환경요건에 따른 운전 패턴 등, 시뮬레이터의 구성을 위해 각종 전기부하와 이와 관련된 배터리 모델링을 하였고 실차실험을 행하여 그 데이터를 분석 정리하였다. 제안하는 모델과 분석된 데이터를 바탕으로 충방전 시뮬레이터를 개발하였고, 개발된 시뮬레이터는 정해진 차종으로 임의의 주행환경으로 운전할 때 차량의 전기에너지 공급 문제를 실차실험을 한 것과 같이 분석할 수 있다