• 한국안전학회지
• /
• 제39권2호
• /
• pp.38-43
• /
• 2024

Recently, with the expanding market for electronic devices and electric vehicles, secondary battery usage has been on the rise. Lithium-ion batteries are particularly popular due to their fast charging times and lightweight nature compared to other types of batteries. A secondary battery consists of four components: anode, cathode, electrolyte, and separator. Generally, the positive and negative electrode materials of secondary batteries are composed of an active material, a binder, and a conductive material. Acetylene Black (AB) is utilized to enhance conductivity between active material particles or metal dust collectors, preventing the binder from acting as an insulator. However, when recycling waste batteries that have been subject to high usage, there is a risk of fire and explosion accidents, as accurately identifying the characteristics of Acetylene Black dust proves to be challenging. In this study, the lower explosion limit for Acetylene Black dust with an average particle size of 0.042 ㎛ was determined to be 153.64 mg/L using a Hartmann-type dust explosion device. Notably, the dust did not explode at values below 168 mg, rendering the lower explosion limit calculation unfeasible. Analysis of explosion delay times with varying electrode gaps revealed the shortest delay time at 3 mm, with a noticeable increase in delay times for gaps of 4 mm or greater. The findings offer fundamental data for fire and explosion prevention measures in Acetylene Black waste recycling processes via a predictive model for lower explosion limits and ignition delay time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1364-1366
• /
• 1998

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay. pixel charging ratio, level-shift of the pixel voltage were simulated with varying the parameters. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• Journal of Information Processing Systems
• /
• 제13권6호
• /
• pp.1487-1495
• /
• 2017

With increasing interests in renewables, more consumers are installing an energy storage system (ESS) in their backyards, and thus, the ESS will play a critical role in the emerging smart grid. Due to mechanical properties, however its operational dynamics must be well understood before connecting the ESS to the smart grid (and eventually to an IT system). To this end, we investigate charging and discharging processes in detail. This paper, then, proposes methods for four type tests (state of charge test, conversion efficiency test, response time test, and ramp rate test) that can assess the dynamics of the ESS. The proposed methods can capture accurate delay values of mechanical processes in the ESS, and it is expected for those values to help design real-time communication systems in the smart grid involving the ESS.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.25-35
• /
• 2000

금속-산화막-반도체 소자의 산화막에 존재하는 느린 준위에 의한 전류반응 특성을 양방향 전류-전압 측정기술을 적용하여 분석하였다. 게이트 바이어스에 따라 나타나는 충전 및 방전시의 순간전류를 유지시간, 지연시간, 전자주입 방향 및 전자주입량, 그리고 전자 주입후 상온 방치시간의 함수로서 조사하였다. 느린 준위의 전하교환에 따른 전류 성분을 게이트 전압에 따라 실리콘 내 캐리어의 이동에 의해 나타나는 변위전류와 분리하여 해석하였다. 충전 및 방전시 나타나는 전하교환 전류는 산화막내 정전하 밀도뿐만 아니라 계면준위 밀도에도 크게 의존이 되며, 본 연구에서는 느린 준위의 전하교환 메카니즘을 제시하였다.

• 대한전자공학회논문지
• /
• 제26권2호
• /
• pp.102-111
• /
• 1989

본 논문에서는 두 가지의 새로운 형태의 non-inverting BiCMOS 구동회로를 제안한다. 이들은 pull-dwon용 바이폴라 트랜지스터의 베이스를 pMOS 트랜지스터를 통해 충전시킴을 그 특징으로 한다. 이들의 pull-up시의 지연시간은 기존의 BiCMOS 구동회로들보다 20%~47% 작다. 또한 본 논문에서 제안하는 구동회로에 사용되는 MOS 트랜지스터의 갯수는 기존의 구동회로에서보다 1~3개가 적기 때문에 그 차지하는 면적이 감소된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.321-324
• /
• 1998

Pixel-Design Array Simulation Tool(PDAST) was used to profoundly the gate signal distortion and pixel changing capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate, data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the resistivity of gate line material on the pixel operations can be effectively analyzed. The gate signal delay, pixel charging ratio, level-shift of the pixel voltage were simulated with varying the resis5tivity of the gate line material. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• 센서학회지
• /
• 제27권2호
• /
• pp.86-92
• /
• 2018

In recent times, motion capture technology using inertial measurement unit (IMU) sensors has been actively used in sports. In this study, we developed a canoe paddle, installed with an IMU and a water level sensor, as a system tool for training and calibration purposes in water sports. The hardware was fabricated to control an attitude heading reference system (AHRS) module, a water level sensor, a communication module, and a wireless charging circuit. We also developed an application program for the mobile device that processes paddling motion data from the paddling operation and also visualizes it. An AHRS module with acceleration, gyro, and geomagnetic sensors each having three axes, and a resistive water level sensor that senses the immersion depth in the water of the paddle represented the paddle motion. The motion data transmitted from the paddle device is internally decoded and classified by the application program in the mobile device to perform visualization and to operate functions of the mobile training/correction system. To conclude, we tried to provide mobile knowledge service through paddle sport data using this technique. The developed system works reasonably well to be used as a basic training and posture correction tool for paddle sports; the transmission delay time of the sensor system is measured within 90 ms, and it shows that there is no complication in its practical usage.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.72-80
• /
• 2001

본 논문에서는 ELA(excimer laser annealing) 및 SMC(silicide mediated crystallization) 공정으로 제작된 다결정 실리콘 TFT-LCD(Thin Film Transistor-Liquid Crystal Display) 화소의 전기적 특성을 Spice회로 시뮬레이션을 통해 비교 분석하였다. 복잡한 TFT-LCD 어레이 (array) 회로의 전기적 특성 분석을 위하여 GUI(Graphic User Interface) 방식으로 손쉽게 복잡한 회로를 구성할 수 있는 PSpice에 AIM-Spice의 다결정 실리콘 박막 트랜지스터 소자 모델을 이식하고, AIM-Spice의 변수 추출법을 개선 체계화하였으며 ELA 및 SMC공정으로 각기 제작된 다결정 실리콘 박막트랜지스터에 적용하여 단위 화소 및 라인 RC 지연을 고려한 화소 특성을 비교 분석하였다. 비교 결과 ELA 다결정 실리콘 박막 트랜지스터 소자가 SMC에 비해 TFT-LCD의 화소 충전 시간 및 킥백(kickback) 전압 특성이 모두 우수하게 나타남을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.26-30
• /
• 2018

The turn-to-turn contact resistance of 2G high temperature superconducting (HTS) coils with metal insulation (MI) is closely related to the stability of the coils, current charging rate and delay time [1]. MI coils were fabricated using five kinds of metal tapes such as aluminum (Al) tape, brass tape, stainless steel (SS) tape, copper (Cu)-plated tape and one-sided Cu-plated SS tape. The turn-to-turn contact surface resistances of co-winding model coils using Al tape, brass tape, and SS tape were 342.6, 343.6 and $724.8{\mu}{\Omega}{\cdot}cm^2$, respectively. The turn-to-turn contact resistance of the model coil using the one-sided Cu-plated SS tape was $ 248.8{\mu}{\Omega}{\cdot}cm^2$, which was lower than that of Al and brass tape. Al or brass tape can be used to reduce contact resistance and improve the stability of the coil. Considering strength, SS tape is recommended. For strength and low contact resistance, SS tape with copper plating on one side can be used.

• 한국분무공학회지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2005

An experimental study was carried out to obtain the fundamental data about the effects of radical ignition on premixture combustion. A CVC(constant volume combustor) divided into the sub-chamber and the main chamber was used. Numerous narrow passage holes are arranged between the main chamber and the sub-chamber. The products including radicals generated by spark ignition in tile sub-chamber derives the simultaneous multi-point ignition in the main chamber. We have examined the effects of the sub-chamber volume, the diameter and number of passage holes, and the equivalence $ratio({\Phi})$ on the combustion characteristics by means of burning pressure measurement and flame visualization. In a CVC, the overall burning time including the ignition delay became very short and the maximum burning pressure was slightly increased by the radical ignition(RI) method in comparison with those by the conventional spark ignition(SI) method. Combustible lean limit by RI method is extended by ${\Phi}=0.25$ compared with that by SI method. Also, In cases of charging the number and the diameter for the fixed total cross section of the passage holes, combustion period increased significantly at a sub-chamber with a single hole, but those of the other conditions had almost a similar tendency in the sub-chamber with 4 or more holes. regardless of equivalence ratio. Therefore, it was Proved that a critical cross section exists with the number of passage holes.