• 한국인터넷방송통신학회논문지
• /
• 제24권2호
• /
• pp.133-138
• /
• 2024

리튬이온 배터리는 높은 에너지 밀도 빠른 충전조건 긴 사이클수명의 특성으로 여러 분야에서 사용되고 있다. 하지만 리튬이온 배터리는 과충전, 과방전, 물리적손상, 고온에서의 사용은 배터리 수명 감소와 보호회로 손상에 의한 화재 및 폭발에 의한 인명피해를 입힐 수 있다. 이러한 배터리의 위험성을 낮추며 배터리 성능을 향상시키기 위해서는 충전 및 방전 과정에서의 특성들을 분석하고 이해하여야 한다. 따라서 본 논문에서는 배터리 충방전기와 시뮬레이터를 활용하여 리튬이온 배터리의 충전 및 방전 특성을 분석하여 과충전 과방전에 따른 배터리 수명 감소와 보호회로 손상에 의한 화재 및 폭발에 의한 인명피해를 줄이고자 한다.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.762-767
• /
• 2017

본 논문은 전기자동차의 충전부하 이동성에 의한 전력시스템 선로에서의 전송전력에 대한 해석과 개선에 대한 내용을 제시하였다. 전기자동차는 화석연료의 고갈과 환경보호의 중요성이라는 측면에서 사용범위가 크게 늘어나고 있으며, 가까운 미래에 가솔린 연료를 사용하는 운송수단을 대체할 것으로 예상되고 있다. 기존의 예측된 고정 부하량에 기초한 전력시스템에서 전기자동차의 이동성 충전부하는 특정 지역에서 이동성 충전부하의 증가로 인한 전송선로에서의 전송전력 집중과 과부하의 문제를 발생시킨다. 이러한 현상의 해석을 위해 New England 시험계통을 부하특성을 기반으로 4개의 지역으로 분할하여 전기자동차 충전부하의 이동을 고려한 예상 시나리오를 가정하였다. 예상 시나리오에서는 표준이 되는 전기자동차의 충전용량을 고려하여 지역단위의 부하량을 최대 31%까지 증가하면서 선로에서의 전송전력 집중과 과부하 현상을 해석하였다. 이러한 선로에서의 과부하 문제에 대한 해결책으로 TCSC를 과부하가 발생한 선로에 직렬 연결하여 선로의 전송전력을 선로제한값 보다 작은 부하율 100% 이내의 값으로 직접 제어할 수 있도록 하였다. 시뮬레이션 결과로부터 전력시스템에 몇 개의 TCSC를 적용함으로써 전기자동차의 이동성 부하 충전에 의한 선로에서의 전송전력 문제를 효과적으로 그리고 경제적으로 해결할 수 있음을 보였다.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.124-132
• /
• 2014

In this paper, we implement a non-time-varying transfer function of the duty ratio to improve the control characteristics in a control system that Input voltage and the output voltage is varied, DC / DC converters for bi-directional charging. When control is performed with using controller gain of conventional design, characteristics of the control is varied to fluctuations of the input voltage. The proposed method is the equivalently removing method for duty ratio in entire control block, by voltage controller gain is changed for inverse of the duty ratio. The proposed non-time-varying duty ratio transfer function is applied to DC / DC converter for bi-directional charging. In this paper, feasibility and superiority is verified through PSIM simulations and experiments.

• 대한화학회지
• /
• 제15권6호
• /
• pp.347-352
• /
• 1971

The variations of the positive and negative electrode potentials, and of internal pressure were measured during the charge of the sealed type Ni-Cd cell. Both polarization characteristics of a paste type Cd-electrode as a gas diffusion electrode in 30% KOH solution and the effects of active carbon electrode as an oxygen consuming auxiliary electrode of the Ni-Cd cell on the charging characteristics of the cell were studied. Peak voltage at the end of charge of the cell is ascribed to the peak at the negative electrode potential, which is due to the concentration polarization by the lack of $Cd^{++}$ ion and oxygen concentration. And the recovery of the negative electrode potential is resulted from depolarization by the increasing diffusion limiting current density with the increasing oxygen pressure. The active carbon electrode was effective as an oxygen consuming auxiliary electrode. The internal pressure of the cell could be maintained below 200mmHg even at one hour rate charge and overcharge by the use of active carbon electrode as an auxiliary electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.105-106
• /
• 2006

The ferroelectric materials of the PZT, SBT attracted much attention for application to ferroelectric random access memory (FRAM) devices. Through the last decade, the lead zirconate titanate (PZT) is one of the most attractive perovskite-type materials for the ferroelectric products due to its higher remanant polarization and the ability to withstand higher coercive fields. FRAM has been currently receiving increasing attention for one of future memory devices due to its ideal memory properties such as non-volatility, high charge storage, and faster switching operations. In this study, we first applied the damascene process using chemical mechanical polishing (CMP) to the fabricate the $Pb_{1.1}(Zr_{0.52}Ti_{0.48})O_3$ thin film capacitor in order to solve the problems of plasma etching such as low etching profile and ion charging. The structural characteristics were compared with specimens before and after CMP process of PZT films. The scanning electron microscopy (SEM) analysis was performed to compare the morphology surface characteristics of $Pb_{1.1}(Zr_{0.52}Ti_{0.48})O_3$ capacitors. The densification by the vertical sidewall patterning and charging-free ferroelectric capacitor could be obtained by the damascene process without remarkable difference of the characteristics.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.44-48
• /
• 2021

In order to obtain ultra-high resolution MRI images, research and development of 11 T or higher superconducting magnets have been actively conducted in the world, recently. The high-temperature superconductor (HTS), first discovered in 1986, was very limited in industrial application until mid-2010, despite its high critical current characteristics in the high magnetic field compared to the low-temperature superconductor. This is because HTS magnets were unable to operate stably due to the thermal damage when a quench occurred. With the introduction of no-insulation (NI) HTS magnet winding technology that does not burn electrically, it could be expected that the HTS magnets are dramatically reduced in weight, volume, and cost. In this paper, a 6 T-class NI HTS magnet for basic characteristic analysis was designed, and a distributed equivalent circuit model of the NI coils was configured to analyze the charging current characteristics caused by excitation current, and the charge delay phenomenon and loss were predicted through the development of a simulation model. Additionally, the critical current of the NI HTS magnets was estimated, considering the magnetic field, its angle and temperature with a given current. The loss due to charging delay characteristics was analyzed and the result was shown. It is meaningful to obtain detailed operation technology to secure a stable operation protocol for a 6T NI HTS magnet which is actually manufactured.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.79-86
• /
• 2012

The aim of this general remarks is to introduce the results concerning the thermo physical, charging, developing and fusing characteristics of micro-encapsulated (MC) model toners in order to apply to the toner of electrophotographic system at the condition of a low temperature. In order to clarify the fusing mechanism of MC toner, rheological analysis of the toner was chosen. It was suggested that MC toner had a different fusing mechanism compared with non-MC toner. Some kinds of MC model toners showed a good result on adhesion test as well as cohesion test. Also, it was possible to get the good charging and development characteristic of MC toner for printing test with laser printer.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1621-1628
• /
• 2016

Experiencing power declines when the secondary coil is at the middle position between two primary coils is a serious problem in segmented on-road charging systems with a single energized segmented primary coil. In this paper, the topological transformation of a primary circuit and a hierarchical compensation capacitor control are proposed. Firstly, the corresponding compensation capacitors and receiving powers of different primary structures are deduced under the condition of a fixed frequency. Then the receiving power characteristics as a function of the position variations in systems with a single energized segmented primary coil and those with double segmented primary coils are analyzed comparatively. A topological transformation of the primary circuit and hierarchical compensation capacitor control are further introduced to solve the foregoing problem. Finally, an experimental prototype with the proposed topological transformation and hierarchical compensation capacitor control is carried out. Measured results show that the receiving power is a lot more stable in the movement of the secondary coil. It is a remarkable fact that the receiving power rises from 10.8W to 19.2W at the middle position between the two primary coils. The experimental are in agreement with the theoretical analysis.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1743-1753
• /
• 2017

Since there are multiple random variables in the probabilistic load flow (PLF) calculation of distribution system containing distributed generation (DG) and electric vehicle charging load (EVCL), a Monte Carlo method based on composite sampling method is put forward according to the existing simple random sampling Monte Carlo simulation method (SRS-MCSM) to perform probabilistic assessment analysis of voltage quality of distribution system containing DG and EVCL. This method considers not only the randomness of wind speed and light intensity as well as the uncertainty of basic load and EVCL, but also other stochastic disturbances, such as the failure rate of the transmission line. According to the different characteristics of random factors, different sampling methods are applied. Simulation results on IEEE9 bus system and IEEE34 bus system demonstrates the validity, accuracy, rapidity and practicability of the proposed method. In contrast to the SRS-MCSM, the proposed method is of higher computational efficiency and better simulation accuracy. The variation of nodal voltages for distribution system before and after connecting DG and EVCL is compared and analyzed, especially the voltage fluctuation of the grid-connected point of DG and EVCL.

• Journal of Biosystems Engineering
• /
• 제17권3호
• /
• pp.272-284
• /
• 1992

As a preliminary step toward the development of a multipurpose electrostatic separator for agricultural use, this study investigated the effect of moisture level, geometrical characteristics and the electric field strength of a charging device on the electrostatic charging of brown rice, unhulled paddy, small stones and broken rice that are produced during the milling process. The results are summarized as follows. 1. Average electrostatic charge per unit mass of paddy is greater than that of brown rice. 2. Charge per unit mass of rice kernel increases linearly with moisture content and electric field strength of the charging device, presenting no correlations with length or thickness of rice kernel. 3. Frequency distributions in electrostatic charge per unit mass of paddy and brown rice kernels indicated that the portion, not overlapped, ranged from 10 to 29% with Japonica rice and from 32 to 49% with Indica rice. 4. The difference in moisture content between paddy and brown rice must be over 6%, if they are to be electrostatically separated to over 95%. 5. Theoretical portions of brown rice to be separated from a mixture primarily by the electrostatic charge and secondarily by the length or by the thickness were 95~100% and 27~76%, respectively. 6. Frequency distribution of electrostatic charge for broken kernels overlapped that of paddy and brown rice, which the small stones didn't.