• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.486-488
• /
• 2004

The SRI (Super Resolution Imager) uses the CCD (Charge coupled device) detector that is used to convert the light into electronic data. The purpose of the SRI is to obtain data for high resolution images by converting incoming light into digital stream of pixel data. The SRI has a high resolution, so this electronic system needs more fast imaging data processing, detector control and data transmission systems. This report describes the required system specification and manufactured electronic system for satellite.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.307-310
• /
• 2000

The measuring method of large object using the pattern matching is discussed in the paper. It is hard and expensive to get the complete 3D data when the object is large or exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method. The point pattern matching method and transform matrix algorithm are used for aligning. The laser slit beam and CCD camera is applied for experimental measurement. Visual C++ on Window98 is implemented in processing the algorithm.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.115-118
• /
• 2001

An image processing method was applied to characterize a shape of the flexible grinding disk. A disk surface image was taken by CCD camera. Depth of cut was changed to be 2 and 4mm. Circles marked on the disk were captured to extract the key features of the deflection. Notable correlation has been observed between the intervals and the process conditions. Same methodology has been applied to check the symmetry of the human face. Tentative results revealed that symmetry could be checked using the filtered face image.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.714-719
• /
• 2003

We propose a measuring method of large object using the pattern matching. It is hard and expensive to get the complete 3D data when the object is large and exceeds the limit of measuring devices. The large object is divided into several smaller areas and is scanned several times to get the data of all the pieces. These data are aligned to get the complete 3D data using the pattern matching method such as point pattern matching method and transform matrix algorithm. The laser slit beam and CCD camera are applied for the experimental measurement. Visual C＋＋ on Windows 98 is implemented in processing the algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.381-381
• /
• 2000

This paper describes the path planning method in an unknown environment for an autonomous mobile robot equipped with CCD(Charge-Coupled Device) camera. The mobile robot moves along the guideline. The CCD camera is useful to detect the existence of a guideline. The wavelet transform is used to find the edge of guideline. Using wavelet transform, we can make an image processing more easily and rapidly. We make a fuzzy control rule using image data then make a decision the position and the navigation of the mobile robot. The center value that indicates the center of guideline is the input of fuzzy logic controller and the steering angle of the mobile robot is the fuzzy output. Some actual experiments for the mobile robot applied fuzzy control show that the mobile robot effectively moves to target position.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.663-664
• /
• 2006

In the electronic, medical, aerospace and automobile industries, many products and parts are manufactured by joining. Recently, as these get smaller, micro joining is becoming more and more important. In this study, micro wire-to-micro wire parallel joining was performed using single mode fiber laser. Maximum power of the fiber laser is 100 W. The CCD(Charge- Coupled Device, CCD) camera to observe the specimen was made up. The objective was applied to micro joining system to make a small spot size of laser beam. In order to control the target position, micro-multi-axis-stage was set up. This paper presents results for the single mode fiber laser joining of micro wires.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.314-319
• /
• 2000

The working surface of a flexible grinding disk was characterized by means of an image processing, in which a picture of a disk surface was taken by the CCD camera and analyzed with the personal computer. As process conditions, depth of cut was changed to be 2 and 4 mm. From the captured image circles marked on the disk was regenerated using the edges detected with scale space filtering. In order to correlate the level of deformation to the distortion of the circles, intervals between each circle have been analyzed. Notable correlation has been observed between the intervals and the process conditions.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.150-157
• /
• 1997

Uniform weld pool shape is important in determining the weld quality. And weld pool width is one of the most dominant factors of the seld pool shape. In order to control the weld pool width, the fuzzy logic controller, which is well adapted to the complicated nonlinear systems such as welding, was used in this study. The weld pool image was obtained through CCD camera, and the weld pool width was calculated by processing the image. Uaing the calculated width, welding speed, as a control input, was inferred by the fuzzy logic controller. An uniform weld pool width can be successfully obtained regardless of the disturbances in the system.

• 한국공간정보시스템학회 논문지
• /
• 제4권2호
• /
• pp.35-40
• /
• 2002

본 연구에서는 현재 개발되고 있는 차량측량시스템(또는 Mobile Mapping System)에서 사용하기 위한 CCD(Charge Coupled Device) 카메라 영상을 취득하는 프로그램을 개발하였다. 특히 2개의 고해상도 칼라영상을 동시에 취득하여 저장할 수 있도록 하여 수치사진측량 기법의 적용이 가능하도록 하였다. 본 연구에서 개발한 프로그램은 GPS-IMU의 장비와 결합하여 차량측량시스템을 이용한 각종 시설물의 3차원 위치 결정, 보존상태 파악 등에 보다 효율적으로 이유될 수 있을 것이다. 특히 현재까지 개발되어 활용중인 프로그램들이 흑백영상을 대상으로 하고 있는 반면 본 연구에서 사용하고 있는 영상은 고해상도의 칼라영상이기 때문에 대상물의 판독력을 높일 수 있어 차량측량시스템의 활용분야를 넓일 수 있을 것으로 기대된다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.