• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.386-392
• /
• 1996

Zinc-Borosilicate is used as a side insulator wall to make high breakdown voltage with one Field Limiting Ring in a power p-n junction device in simulation. It is known that surface charge density can be yield at the interface of Zinc-Borosilicate glass / silicon system. When the glass is used as a side insulator wall, surface charge varied potential distribution and breakdown voltage is improved 1090 V under the same structure.The breakdown voltage under varying the surface charge density has a limit value. When the epitaxial thickness is varied, the position of FLR doesn't influence to the breakdown characteristic not only under non punch-through structure but also under punch-through structure. (author). 7 refs., 12 figs., 2 tabs.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.4
• /
• pp.226-232
• /
• 2000

In magnetic systems, distribution of electromagnetic force density causes mechanical deformation, which results in noise and vibration. In this paper, Korteweg-Helmholtzs energy method and equivalent magnetic charge method are employed for comparison of their resulting distributions of force density. The force density from the Korteweg-Helmholtzs method is expresses with two Maxwell stresses on the inside and the outside fo magnetic material respectively. The other is calculated using the magnetic Coulombs law. In the numerical model of an electromagnet, their numerical results are compared. The distributions by the two methods are almost the same. And their total forces are also shown to be the same to the one calculated from the conventional Maxwell stress tensor. But the magnetic charge method is easier and more efficient in numerical calculation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1102-1114
• /
• 2002

An electret filter is composed of permanently charged electret fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using poly-disperse particles when submicron particles were loaded. Long-term experiments were conducted by applying two different charging states, which were spray electrification and charge equilibrium by bipolar ionization. In order to investigate the effect of particle loading in filter media, NaCl particles were generated from 0.1% and 1% solutions by an atomizer. Liquid DOS particles were used to evaluate the effect of liquid particles on the collection efficiency of an electret filter. The results show significant effect of charge amount and size distribution of loading particles on the collection performance of a filter media in submicron region. Smaller particles loaded in electret fibers cause a more rapid degradation in collection efficiency and have lower minimum efficiency with time. The pressure drop of a filter media do rarely increase when the collection efficiency decreases to the minimum value. For the larger particles charged by spray electrification, which have charge amounts more than that of Boltzmann equilibrium charge distribution, the pressure drop of a filter media slowly increases in comparison with that of equilibrium charged particles. For DOS particles it is shown that the charging level of an electret filter severely decreases and the collection efficiency is below 10% in some particle size range.

• The Journal of Fisheries Business Administration
• /
• v.5 no.1
• /
• pp.9-42
• /
• 1974

Korea is a peninsular country surrounded by seas on three sides, and the fishing industry has carried out the service of suppling to the people with important anima protein. The distribution of fishery products has very complicated structures, because the production is in charge of small producers scattering along the coast all over the country, while consumpstion is made by separate homes in areas away from producing district. The relation between these two factors the structures make very complicated. The most typical and special structures of fishery distridution are distinguished in two, that is, one is landing market, the other is inland market. Landing markets have been monopolized by fishermen's cooperatives, providing with landing facilities and building sites. Fish markets played not only an important role in the landing, but distribution and price determination of catches by auction or tender. Inland markets are two types of wholesale market in consuming center, one is the terminal market for urban consumers, the other type is the local market for rural consumers. Fundamental functions of landing markets are gathering, assessment, and distribution functions. Gathering function is in charge of wholesaler in fishery cooperative. Gathering amounts are equal to gathering capacity of wholesaler and transact ability of licensed dealers as shown below model. Gathering amount=f.gathering capacity(=pre price.landing facility.account of wholesaler.distance of fishing ground.conveniency purchasing.home port)=fㆍ transact ability of licensed dealers≒f.population or port, and table 1 indicates these relationship. Assessment and distribution functions are in charge of licensed dealers in consumption side. Assessment function should bring the value in production activity through the auction between the cooperative seller and the licensed dealer as buyer. For fair trade transaction in auction, the free competition is supposed to be a prerequisite among the licensed dealers. The ideal condition for free competition is sameness in the scale of buying amount by licensed delaers, but it is almost impossible to attain its goal in actual marketing.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1211-1222
• /
• 2018

This study presents a power distribution control scheme for a three-phase interleaved parallel DC/DC converter in a battery energy storage system. To extend battery life and increase the power equalization rate, a control method based on the nth order of the state of charge (SoC) is proposed for the charging and discharging processes. In the discharging process, the battery sets with high SoC deliver more power, whereas those with low SoC deliver less power. Therefore, the SoC between each battery set gradually decreases. However, in the two-stage charging process, the battery sets with high SoC absorb less power, and thus, a power correction algorithm is proposed to prevent the power of each particular battery set from exceeding its rated power. In the simulation performed with MATLAB/Simulink, results show that the proposed scheme can rapidly and effectively control the power distribution of the battery sets in the charging and discharging processes.

• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.135-148
• /
• 2013

Purpose: This paper presents a method to evaluate the stockpile reliability of propelling charge for performance and storage safety with storage time. Methods: We consider a performance failure level is the amount of muzzle velocity drop which is the maximum allowed standard deviation multiplied by 6. The lifetime for performance is estimated by non-linear regression analysis. The state failure level is assumed that the content of stabilizer is below 0.2%. Because the degradation of stabilizer with storage time has both distribution of state and distribution of lifetime, it must be evaluated by stochastic process method such as gamma process. Results: It is estimated that the lifetime for performance is 59 years. The state distribution at each storage time can be shown from probability density function of degradation. It is estimated that the average lifetime as $B_{50}$ life is 33 years from cumulative failure distribution function curve. Conclusion: The lifetime for storage safety is shorter than for performance and we must consider both the lifetime for storage safety and the lifetime performance because of variation of degradation rate.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1131-1140
• /
• 2016

A simple design for a sliding mode observer is proposed for EV lithium battery SOC estimation in this paper. The proposed observer does not have the limiting conditions of existing observers. Compared to the design of previous sliding mode observers, the new observer does not require a solving matrix equation and it does not need many observers for all of the state components. As a result, it is simple in terms of calculations and convenient for engineering applications. The new observer is suitable for both time-variant and time-invariant models of battery SOC estimation, and the robustness of the new observer is proved by Liapunov stability theorem. Battery tests are performed with simulated FUDS cycles. The proposed observer is used for the SOC estimation on both unchanging parameter and changing parameter models. The estimation results show that the new observer is robust and that the estimation precision can be improved base on a more accurate battery model.

• 한국산학경영학회:학술대회논문집
• /
• 2004.11a
• /
• pp.4-22
• /
• 2004

The Internet provides a new distribution channel of digital contents for conventional media firms such as newspaper, magazine and encyclopedia publishers and broadcasting companies with very low marginal production and distribution cost. In comparison to traditional offline channel, there have been various revenue models in online content markets such as advertising model, subscription model, affiliation fee model, etc. In the earlier of the Internet era, most of online content firms provided their services free in order to boost offline revenue or they depend on advertising revenue sources in lieu of attaining revenue from their contents. However, as many online content firms are confronted with many difficulties in attaining revenues from online advertising model, they began to charge their contents. This paper shows why they charge their contents and explores entry conditions when conventional firms enter online content markets. And also this paper discusses managerial implications related to pricing strategies in online content markets.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1804-1806
• /
• 1996

For the rather complicated and time-consuming three-dimensional electric field calculation in the vicinity of substations, this paper proposes a numerical calculation method based on charge simulation method(CSM). In order to represent non-uniform charge distribution on an electrode better, it is subdivided into small segments with linear charge density. Non-uniform arrangement of subdivided segments makes it possible to obtain high accuracy with a small number of variables. As for the arrangement of subdivided segments, effective formulars were derived from multiple regression analysis of many simulations. These formulars make the arrangement of segments fast and effective. The proposed method is applied to the electric field calculation around the 345kV Sinmasan Substation busbars and the distribution of calculated electric fields is compared with that of the measured electric fields.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1072-1074
• /
• 1995

Zinc-Borosilicate is used as a side insulastor wall to make high breakdown voltage with one Field Limiting Ring in a p-n junction. It is known that surface charge can be yield at the interface of Zinc-Borosilicate Glass/Silicon system. When the glass is used as a side insulator wall, surface charge varied potential distribution and breakdown voltage improved more than 660V without using more FLR.