• 산업경영시스템학회지
• /
• 제30권4호
• /
• pp.164-169
• /
• 2007

The estimation of mortality characteristics of industrial property is an important adjunct to engineering valuation and depreciation estimation. Once the important of depreciation estimation is determined, it is desirable to understand the processes upon which these estimates are based. The Iowa type survivor curves are a set of generalized retirement dispersion models. These curves were based on analysis of actual retirement experience and represent typical retirement behavior patterns likely to be encountered. The retirement rate of Iowa type survivor curves on the semiconductor equipments in Korea industry was estimated by the life estimation process. In this paper, estimates of service lives based on directly observed data of the domestic semiconductor equipments are presented.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.61-65
• /
• 2001

A new flaw detection technique using by SH angle beam method has been discussed. The SH-wave is horizontally polarized shear wave and the surface SH wave has a characteristic of traveling along near surface layer. The surface SH wave technique is valuable for the detection of fatigue cracks at fillet weld heels which cannot be detected by other ultrasonic technique such as angle beam technique and The dispersion curves of it has simple characterization. In this work, using these beneficial chraterization, quality evaluation of spot weld with ultrasonic sound intensity of SH-wave passing through nugget area of spot weld are verified experimentally.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.194-198
• /
• 2008

Several methods for improving dispersion of carbon nanotubes (CNTs) have been investigated. CNTs modified by acids and hydrogen peroxide ($H_2O_2$) showed improved dispersion. From SEM micrographs and photos of dispersion, CNTs modified with nitric acid and $H_2O_2$, showed no agglomeration in solution even standing for 4 months, which means successfully improved dispersion property. TEM micrographs of surface modified single CNT treated with 69% $HNO_3$ in boiling acid solution as the optimum method were obtained. For confirmation of CNTs' application to EDLC electrode materials, characteristics of EDLC have been analyzed by cyclic voltammetry curve, specific capacitance of unit cell, electrode discharge curves and AC impedance curve. From the results, it could be confirmed that electrochemical properties of CNTs were enhanced after surface modification with 69% $HNO_3$ acid treatment.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.

• 지구물리
• /
• 제9권3호
• /
• pp.231-240
• /
• 2006

The crustal structure of the Korean Peninsula was investigated by analyzing phase velocity dispersion data of Rayleigh waves. Earthquakes recorded by three component broad-band velocity seismographs during 1999-2004 in South Korea were used in this study. The fundamental mode Rayleigh waves were extracted from vertical components of seismograms by multiple filter technique and phase match filter method. Phase velocity dispersion curves of the fundamental mode signal pairs for 14 surface wave propagation paths on the great circle in the range 10 to 80 sec were computed by two-station method. Treating the shear velocity of each layer as an independent parameter, phase velocity data of Rayleigh wave were inverted. All the result models can be explained by a rather homogeneous crust of shear-wave velocity increasing from 2.8 to 3.25 km/sec from top to about 33 km depth without any distinctive crustal discontinuities and an uppermost mantle of shear-wave velocity between 4.55 and 4.67 km/sec. Our results turn out to agree well with recent study of Cho et al. (2006 b) based on the analysis of seismic background noises to recover short-period (0.5-20 sec) Rayleigh- and Love-wave group velocity dispersion characteristics.

• 한국소음진동공학회논문집
• /
• 제23권6호
• /
• pp.512-519
• /
• 2013

보강재를 가진 평판 구조로 이루어진 많은 구조물의 진동 현상을 해석하기 위해서는 평판 요소에 대한 진동 특성을 이해하는 것이 필요하다. 이 연구에서는 폭이 유한하고 길이가 무한한 띠 평판의 진동 특성을 이론 해석과 수치 해석을 통해 알아보고자 한다. 수치 해석 기법으로는 단면의 형상이 길이 방향으로 일정한 도파관 구조물의 진동 해석에 효과적인 도파관유한요소법(waveguide finite element method)을 사용한다. 도파관유한요소법은 구조물의 2차원 단면만을 유한요소 모델링하고, 길이 방향으로는 파동이 조화 진동하면서 전파한다고 가정한다. 이 논문에서는 먼저 띠 평판의 분산 선도와 가진점 모빌리티에 대한 수치 해석 결과를 이론 해석 결과와 비교하여 수치 해법의 타당성을 검증한다. 그리고 수치 해석을 이용해 보강재가 부착된 평판에 대한 분산 선도와 가진점 모빌리티를 구하고, 보강재가 띠 평판의 파동 전파 및 진동에 미치는 영향을 검토한다. 마지막으로 보강재가 부착된 이중 평판(double plate)에 대해 분산 선도를 구하고, 이로부터 파동 전파 특성을 살펴본다.

• 한국응용과학기술학회지
• /
• 제32권3호
• /
• pp.386-393
• /
• 2015

콜로이드 분산계와 같은 복잡한 물질의 유변성질은 전단 흐름이 일어날 때 비뉴톤 유동현상을 나타낸다. 이들 유변성질은 유동단위의 성질과 유동 세그먼트 사이의 상호작용에 의하여 영향을 받는다. 유동곡선을 이론적인 틱소트로피식에 적용하여 여러 틱소트로피 유동 곡선에 대한 유동파라메타, 완화시간, $({\beta}_2)_0$, 구조적인 요인, $C_2$, 전단 모듈러스, $X_2/{\alpha}_2$을 구하였다. 유변 파라메타의 변화는 비뉴톤 유동, 점도, 유동 세그먼트의 유동 활성화 에너지와 직접적인 관계가 있다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.272-277
• /
• 2004

The elastic waves in the plate are dispersive waves with the characteristics of Lamb waves. However, $S_0$ symmetric mode is less dispersive in the frequency region less than first cut-off frequency. And, in anisotropic plates such as CFRP plates, the propagation velocities vary with the direction. So, the wave vector direction to be the phase velocity direction is not accord with the energy flow direction to be the group velocity direction. In this work, the group velocities of the $S_0$ symmetric mode less than the first cut-off frequency was analyzed with the group velocity dispersion curves in unidirectional CFRP plate. And, the group velocity curve obtained by the group velocity dispersion curves are compared with the measured velocities as varied the propagation direction of the Lamb wave. The measured velocities are good agreement with the corrected group velocity curve except near the fiber direction which is called the cusp region. When the propagation direction is not accorded with the principal axis, the direction of the group velocities declines to the fiber direction in the unidirectional CFRP plates. This implies that the energy propagates preferentially toward fiber direction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.37-39
• /
• 1994

We have investigated the characteristics of planar optical waveguides formed by silver ion-exchange. Experimental values of the effective indices of guided modes were obtained by measuring the synchronous angles of strongest coupling. Definition of an effective diffusion constant leads to the mode-dispersion curves applicable over a wide range of fabrication conditions. In order to compare experimental and theoretical results, We have plotted each mode index of a wide range of fabrication conditions.

• 비파괴검사학회지
• /
• 제24권4호
• /
• pp.307-314
• /
• 2004

배관의 축방향 균열 검사를 위하여 원주 방향으로 진행하는 유도초음파 모드를 적용하였다. 배관의 곡률을 변수로 원주 유도초음파의 분산선도를 계산하였으며 이를 배관 검사에 적용하기 위하여 중수로 피더관의 곡관부 축방향 균열을 탐지에 적용하였다. 상대적으로 낮은 주파수에서는 Lamb 파 특성을 따르나 주파수가 증가함에 따라 평판의 경우, 즉 곡률이 무한대인 경우 첫 번째 $A_0$ 모드와 두 번째 $S_0$ 모드가 합쳐져서 Rayleigh 모드 형태로 변화한다. 한편 곡률을 가진 배관의 경우는 주파수가 증가하더라도 첫 번째 모드와 두 번째 모드가 합쳐지지 않았다. 이러한 해석을 기초로 하여 배관의 일종인 중수로 피더관 곡관부 축방향 결함을 탐지하기 위하여 사각 탐촉자를 사용하여 Rocking 원주 유도초음파 기법을 적용하였다. 원주 방향으로 유도파를 진행시키면서 인공 결함으로부터의 수집된 신호를 분석하여 진동 모드를 확인하였으며 두께 대비 10% 깊이의 notch도 검출할 수 있음을 확인할 수 있었다.