• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.744-752
• /
• 1999

In this paper, we studied the response characteristics of $\alpha$, $\beta$ separated type, combined type, PI typed, and feedforward type in 2DOF-PID controller through the simulation and the experiments designed with the multivariable flow control system. The parameters $\alpha$ and $\beta$ give an affect to characteristics of controller in separated type but $\gamma$ does not give an affect to the characteristics of 2-DOF PID. The more $\beta$ increases, the more overshoot decreases and especially, in case of PI type represent clearly. The $\alpha$, $\beta$ separated type has a very small overshoot and its magnitudes in 2-DOF PID onctroller increases in order of $\alpha$, $\beta$ combined type, PI type, feedforward type, conventional type. The response characteristics of simulation are similar to that of experiments but the experimental characteristics in the multivariable flow control system has the delayed response. The time delay of response in experiments depends on 2-DOF parameter $\alpha$, $\beta$, $\gamma$ and the overshoot increase as the $\alpha$, $\beta$, $\gamma$ increase. So, we can have a satisfactory response by tuning D gain.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.196-207
• /
• 2014

This study considers expression types and aesthetic characteristics by analyzing Animal sculptures by Billie Achilleos in art collaboration with Louis Vuitton. The conclusions of this study are as follows. First, As for expressin type shown in the art collaboration, it is reflected the historical and cultural value peculiar to a country symbolized through animals. As the aesthetic characteristics of symbolism, it reflects historical identity of country by using an image of a symbolic animal representing a state. Second, as the type shown in physical characteristics of animals by utilizing items in Louis Vuitton directly, it is organically expressed a literal type by directly integrating a form having been designed as a commodity itself into the characteristically physical part of an animal. As the aesthetic characteristics according to this is naturality, the motive of the work having borrowed shapes of diverse animals or insects can be said to have been naturally reflected in the primitive natural beauty. Third, through the deconstruction and recombination of a Louis Vuitton item. the amusement of the aesthetic characteristics was expressed in a type having the structurally embodied dynamic movement of an animal, and is expressing visual fun. Fourth, it uses expression type emphasized a specific part of an animal by decorating accessories in Louis Vuitton partly. The aesthetic characteristics is Ornament, the value of craft decoration is being shown by using colorful visual effects by using materials with the colorful textures and patterns of fabrics or mixing embroidery or beads, and belt decoration.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.100-105
• /
• 2004

Fin-tube type(Fin-type) heat exchanger has been tested in order to replace the heat exchanger of parallel flow type(P.F -type) which is now widly used in automobile air conditioning system The following conclusions are drawn by the comparison of the characteristics of the heat exchangers. Evaporator and condenser capacities and COP(Coefficience of performance) were varied as with the compressor speed, outdoor air temperature and air flow rate changed, which much influenced on the characteristics of the air conditioning system Evaporator and condenser capacities were increased with increasing compressor speed and outdoor air temperature. Evaporator and condenser pressures of Fin-type were decreased by 7% and 5% respectively compared with those of P.F-type. The COP of Fin-type was decreased with increasing outdoor air temperature and compressor speed. The COP of P.F-type was decreased by 14% compared with that of Fin-type.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.3-12
• /
• 2017

As the quality of life has improved today, there is a growing desire among consumers for new space and interest in spending their valuable time in 'the third space' has tended to increase. Cafes have been integrated with sales and exhibition space as the representative third space. For example, it's cafe type automobile exhibition centers. The purpose of this study is to examine the characteristics of 'the third space' in cafe type automobile exhibition centers and suggest a plan for effective spatial characteristics. It checked the necessity of the third space' in automobile exhibition centers by analyzing automobile consumption trends of the 21st century according to industry change and restructures a checklist by grasping cafe type automobile exhibition centers and the concept and characteristics of 'the third space' based on the precedent studies. A questionnaire is made through the checklist drawn and a survey is conducted targeting users of the target areas of cases. The target areas of cases are 4 cafe type automobile exhibition centers opened in Korea since 2014. The analytical results of the target areas of cases that reflected the characteristics of 'the third space' are as follow: First, cafe type automobile exhibition centers must be built to make customers enter the space and at the same time, receive information on automobiles and space naturally. Second, in order to increase satisfaction with the space and brands, there is the necessity to arouse their interest through various experiences including test driving cars directly. Third, revisit intention can be found to be more influenced by spatial design than brand satisfaction. Fourth, partitions or interior for dividing the space need to be improved. In the next studies, specific research on plans about creating design to improve corporate image and brands and induce customers to revisit cafe type automobile exhibition centers by applying the characteristics of 'the third place' to them is required.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.45-53
• /
• 1998

Friction and wear test for two kinds of Cu-based sintered metallic friction material against cast iron disk was carried out by plate-on-disk type friction and wear tester to investigate the friction and wear characteristics of brake system in severe condition. In this experimental study, the counter specimen was cast iron which is being used generally in brakes of heavy duty equipments. Test friction materials were A type which was manufactured by foreign company and B type by domestic company. Friction coefficient and wear volume were measured and compared with each other. The experiment was performed under room temperature. The worn surface of cast iron disk and friction material were observed by scanning electron microscope. The temperature of surface of disk was measured continuously by the non-contacting thermometer. It was found that A type friction material had stable friction coefficient over the wide range of sliding condition, but B type friction material had unstable friction coefficient and lower value of 0.2 under the severe sliding condition.

• Journal of Korean Clinical Health Science
• /
• v.5 no.3
• /
• pp.897-906
• /
• 2017

Purpose. In this study, the empowerment and job characteristics of dental hygienists by hospital type were identified and the relationships between empowerment and job characteristics were examined. Methods. The subjects were 156 working dental hygienists. A structured self-administered questionnaire was used to investigate the empowerment and job characteristics of dental hygienists. For empowerment and Job Characteristics, the scale developed by Spreitzer and Hackman and Oldham was used. Results. The results of this study showed that the degree of formation of empowerment for dental hygienists was the highest in general/university hospitals. All elements of job characteristics were closely correlated with empowerment, and hospital type was correlated with the determination of empowerment. Job characteristics influenced empowerment. This result suggests that the inherent jobs of dental hygienists did not change much by hospital type, but empowerment changed because the organizational characteristics changed according to hospital size. Conclusions. Therefore, considering the importance of the jobs of dental hygienists, hospitals need to form an organizational atmosphere that guarantee autonomy and promote a diversity of jobs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.160-170
• /
• 1997

The objective of this study is to investigate the atomization characteristics and the performance characteristics of a C. I. engine by using the changes of the injection nozzle type and the ultrasonic-energy-added system. In order to evaluate the effect of ultrasonic energy and of change of injection nozzle type in the performance characte- ristics of a diesel engine, measurements of droplet size of diesel fuel were carried out by using Malvern system. In all types of injection nozzles, SMD of the ultrasonic- energy -added diesel fuel was smaller than that of the conventional diesel fuel and the more injection pressure increased, the more SMD decreased. There was a small increase in SMD with the distance from injection nozzle under all conditions of the injection nozzle types. The minimum SMD was found in the injection nozzle of B type. In the diesel engine test, there were three results about the engine performance. Compared with the injection nozzle of A type, B type had excellent effects in the engine performance. The most excellent effects about the engine performance were obtained in the case of ultrasonic-energy-added diesel fuel. In addition, the torque diagram in the case of ultrasonic-energy-added diesel fuel was more stable and periodical than others.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.6
• /
• pp.316-321
• /
• 1999

Disk type single phase switched reluctance motor which is a simple robust construction, simple control circuit and low manufacturing cost, has a characteristics of axial and radial flux machines. However, because this DSPSRM has a complicated magnetic circuit, it is difficult to analyze the design characteristics.. In this study, the calculation of design parameter based on the conventional design theory of electric machine and the characteristics analysis by computer simulation was performed. As the DSPSRM has the characteristics of both AFM and RFM, it is difficult to analyze its characteristics by the 2D FEM. 3D FEM was applied in the analysis of energy distribution and approximated calculation of torque characteristics with rotor positions. With analysis results, prototype of DSPSRM is manufactured.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.368-372
• /
• 2011

The aerodynamic characteristics of the L-type side jet thruster are examined by using computational fluid dynamics methods. The critical design points of L-type side jet thruster with bent nozzle by 90degrees are studied in terms of the relation between side jet nozzle geometry and thrust efficiency.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.333-338
• /
• 1999

Thin film inductors of $10 mm \times 10 mm$ with inner coil type of 14 turns were fabricated by sputtering, photo-masking, and etching processes. Their characteristics of impedances and annealing after were investigated. The properties of impedances of the thin film magnetic core inductors with inner coil type were improved by magnetic field annealing due to the removal of residual stress and the improvement magnetic properties of magnetic films. But the characteristics of frequency of the thin film magnetic core inductors were not improved by magnetic field annealing due to properties of the spiral pattern and inner coil type. The thin film magnetic core inductor annealed by uniaxal field annealing method showed an inductance of 1000 nH and resistance of$ 6 \Omega$ of 1 at 2 MHz.