• 한국전산유체공학회지
• /
• 제9권4호
• /
• pp.55-63
• /
• 2004

The three-dimensional Stokes flow within a staggered screw channel is obtained by using a finite volume method. The geometry is intended to mimic the single screw extruder having staggered arrangement of flights. The flow solution is then subjected to the analysis of the stirring performance. In the analysis of the stirring performance, the stretching-mapping method developed by the author is employed for calculating the materials' stretching exponents, which are to be used in quantification of the mixing effect. The numerical results Indicate that the staggered geometry gives indeed far much better stirring-performance than the standard (nonstaggered) flight geometry. It was also shown that care must be given to the selection of the basis planes for evaluating the local stretching rate, and it turns out that the best method (H-method) has its basis plane just on the half way between the past and future evolution of fluid particles subjected to the defromation. In evaluating the stretching exponent, the expansion ratio must be considered which is one of the characteristic differences of the actual three-dimensional flows from the two-dimensionmal counterparts. The larger axial pressure-difference causes in general the smaller stirring performance while the flow rate is increased. The smaller channel length also increases the stirring performance.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.157-162
• /
• 2013

To analyze the dynamic acceleration characteristics, it is necessary to identify the acceleration model using some methods that can represent the dynamic properties well. In this sense, fractal methods were used for the verification of characteristics of an acceleration signal. To estimate and analyze the geometry of acceleration signal, a fractal interpolation and its analysis was introduced in this paper. The chaotic nature of acceleration signal was considered in fractal modeling. In this study the fractal signal modeling has brought a focus within the scope of the fractal interpolation and fractal dimension. And a new idea of fractal dimension has been introduced and discussed considering the damping ratio and amplitude for its dynamic properties of the signal. The fractal dimension of acceleration with respect to the scaling factor using fixed data points of 1000 points was calculated and discussed. The acceleration behaviors of this results show some different characteristics. And this fractal analysis can be applied to other signal analysis of several machining such as pendulum type grinding and milling which has many dynamic properties in the signal.

• 한국콘텐츠학회논문지
• /
• 제11권1호
• /
• pp.9-15
• /
• 2011

제로-워터마킹은 디지털 콘텐츠에 워터마크를 삽입하지 않음으로써 데이터 왜곡과 품질 저하를 피할 수 있는 디지털 워터마킹 기법이다. 이 논문에서는 DCT 영역에서 CRT를 기반으로 한 제로-워터마킹 기법인 DCT0CRT를 제안한다. 무질서한 방식으로 선택된 DCT 블록의 DC 또는 낮은 주파수의 AC 계수들 중에서, 워터마크 정보와 매칭되는 CRT 기반 조건을 만족하는 것을 선택하고, 이러한 선택 정보를 키로 생성함으로써, DCT 영역에서 제로-워터마킹이 가능하도록 지원한다. 이 워터마킹 기법은 이미지에 어떤 변경도 하지 않기 때문에, 이 워터마킹 기법을 적용한 이미지의 품질은 다른 CRT 기반 워커마킹 기법에 비하여 우수하며, 샤프닝, 블러링, JPEG 손실 압축 등을 이용한 공격에도 워터마크가 강인함을 보여준다.

• 복식
• /
• 제67권4호
• /
• pp.102-115
• /
• 2017

This study aims to investigate the role and function of costume in the ancient society by analyzing the jade decorations, 'Gui', 'Bi', and 'Hwang,' recorded in "Zhouli". The method of study consisted of researching the record book "Zhouli" and comparing the antiquities with the images of the jades. Firstly, the jade decorations were different depending on class. The class system in Zhou dynasty was made up of 6 grades - emperor, duke, marquis, count, viscount, and baron. The jade decorations used by people in these grades were called 'Gui', 'Bi', and 'Hwang'. Secondly, this study grasped the system of 'Gui', 'Bi', and 'Hwang.' It identified 7 types of duties by matching the decorations on the jade to specific institutions. 'Gui', 'Bi', and 'Hwang' played a huge role in forming and maintaining to order and system during the chaotic Zhou dynasty. In addition, it became an essential part of understanding status, society, and political structure within a family power structure.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.354-362
• /
• 2002

In this paper, the heat transfer characteristics of a self-oscillating heat pipe are experimentally investigated for the effect of various working fluid fill charge ratios and heat loads. The characteristics of temperature oscillations of the working fluid are also analysed based on chaotic dynamics. The heat pipe is composed of a heating section, a cooling section and an adiabatic section, and has a 0.002m internal diameter, a 0.34m length in each turn and consists of 19 turns. The heating and the cooling portion of each turn has a length of 70mm. A series of experiments was carried out to measure the temperature distributions and the pressure variations of the heat pipe. Furthermore, heat transfer performance, effective thermal conductivity, boiling heat transfer and condensation heat transfer coefficients are calculated for various operating conditions. Experimental results show the efficacy of this type of heat pipe.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.93-100
• /
• 2007

The flow velocity distribution at inlet and exit of Diesel Particulate Filter(DPF) by fabricating L-shape connector with the DPF was measured using a Pitot-tube and 2-D transverse machine. An adaptor designed for making the Pitot tube probe access to the inlet and exit of the DPF was connected with the inlet and exit flange of the DPF, respectively. The Pitot tube which was mounted in the 2-D positioning machine could access to the inlet and exit of the DPF through the rectangular window of the adaptor. The L-shape connector in the DPF inlet has a flow guide which is a perforated steel pipe. The flow velocity distribution at the inlet of the DPF showed a chaotic velocity distribution which is different from that with a diffuser type connector. The velocity distribution at the exit of the DPF showed a crown shape which is similar to that of the diffuser type connector. The velocity distribution at the exit of DPF showed different patterns according to the air flow rate.

• 성인간호학회지
• /
• 제19권2호
• /
• pp.191-206
• /
• 2007

Purpose: This qualitative study aimed to understand the experiences of reorganization of everyday lives among the women with chronic health problem. Methods: In this study, the approach and its process of sociology of everyday lives were adopted. Data for the study came from 6 informants and 9 family members of the informants by interview and participant-observation from January, 2004 to May, 2006. Qualitative content analyzing methods were adopted. Results: Informants' everyday lives were reorganized as follows. During the experiences of shock from unpleasant and unclear symptoms of their body, their sight fixed on the body part. Their time also fixed on a point of present. They started to wander from medical care to folk and lay care. After they were informed that the health problem could not be treated completely, they reduced the world of everyday life and protected themselves from the chaotic unfamiliar world by setting -a- side duties as a family member and severing unessential social relationship. As they achieved a skill for managing their health problem, they gained their former pattern of everyday lives as a woman, a family member, and a social member. Finally, they created a new life world. Conclusion: We need more study on the development of an adaptive strategy by the informants, to intervene in the crisis of everyday life.

• 산업경영시스템학회지
• /
• 제19권37호
• /
• pp.233-240
• /
• 1996

Julia set, Fatou set와 Mandelbrot set 가 컴퓨터에 의하여 도형화된 후부터 혼돈 역학체계 (chaotic dynamical system)에 대한 연구가 모든 학계에 비상한 관심을 모으고 있으며 특히 수학자들에 의하여 많은 연구가 이루어지고 있다. 또한 혼돈 역학체계를 기초로 하여 컴퓨터 그래픽스를 이용한 후랙탈(fractal)들의 매혹적인 시각적 표현으로 인하여 최근들어 과학자들 뿐 아니라 일반대중의 후랙탈에 대한 관심이 매우 높아지고 있다. 후랙탈이란 말은 라틴어 fractus(부서진 상태를 뜻함)에서 유래되었으며 1975년 Mandelbrot가 수학 및 자연계의 비정규적 패턴들에 대한 체계적 고찰을 담은 자신의 에세이의 표제를 주기 위해서 만들었다(〔6〕). 후랙탈을 기술하는데 있어서 가장 중요한 양은 차원(dimension)으로, 예컨데 Cantor 1/3 집합은 길이 1인 선분으로부터 시작하야 매 단계마다 모든 선분들의 가운데 1/3을 잘라내는 것을 무한히 반복함으로써 얻어지는데 이 집합의 Lebesgue measure는 0이지만 후랙탈 차원은 log2/log3 로 정수차원이 아닌 실수차원을 갖으며 또한 Cantor 1/3집합은 연속이 아니면서 점도 선도 아닌 집합인 것이다. 이 논문에서는 Box counting dimension 과 Hausdorff dimension에 대한 몇 가지 정의를 하고 정리 2.6, 정리2.7 및 정리 3.3을 증명함으로써 어떤 성질을 갖는 후랙탈의 가장 중요한 양인 후랙탈 차원에 대하여 논의 하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3608-3628
• /
• 2017

Several block cipher modes of operation have been proposed in the literature to protect sensitive information. However, different security analysis models have been presented for attacking them. The analysis indicated that most of the current modes of operation are vulnerable to several attacks such as known plaintext and chosen plaintext/cipher-text attacks. Therefore, this paper proposes a secure block cipher mode of operation to thwart such attacks. In general, the proposed mode combines one-time chain keys with each plaintext before its encryption. The challenge of the proposed mode is the generation of the chain keys. The proposed mode employs the logistic map together with a nonce to dynamically generate a unique set of chain keys for every plaintext. Utilizing the logistic map assures the dynamic behavior while employing the nonce guarantees the uniqueness of the chain keys even if the same message is encrypted again. In this way, the proposed mode called SPCBC can resist the most powerful attacks including the known plaintext and chosen plaintext/cipher-text attacks. In addition, the SPCBC mode improves encryption time performance through supporting parallelized implementation. Finally, the security analysis and experimental results demonstrate that the proposed mode is robust compared to the current modes of operation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.185-190
• /
• 1995

In recent years, many researcher have been interested in the stability of a thin beam. Among them, Pai and Nayfeh[1] had investigated the nonplanar motion of the cantilever beam under lateral base excitation and chaotic motion, but this study is associated with internal resonance, i.e. one to one resonance. Also Cusumano[2] had made an experiment on a thin beam, called Elastica, under bending loads. In this experiment, he had shown that there exists out-of-plane motion, involving the bending and the torsional mode. Pak et al.[3] verified the validity of Cusumano's experimental works theoretically and defined the existence of Non-Local Mode(NLM), which is came out due to the instability of torsional mode and the corresponding aspect of motions by using the Normal Modes. Lee[4] studied on a thin beam under bending loads and investigated the routes to chaos by using forcing amplitude as a control parameter. In this paper, we are interested in the motion of a thin beam under torsional loads. Here the form of force based on the natural forcing function is used. Consequently, it is found that small torsional loads result in instability and in case that the forcing amplitude is increasing gradually, the motion appears in the form of dynamic double potential well, finally leads to complex motion. This phenomenon is investigated through the poincare map and time response. We also check that Harmonic Balance Method(H.B.M.) is a suitable tool to calculate the bifurcated modes.