• 제목/요약/키워드: channel properties

검색결과 958건 처리시간 0.03초

Geotechnical Engineering Progress with the Incheon Bridge Project

  • Cho, Sung-Min
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.133-144
    • /
    • 2009
  • Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

  • PDF

한국연안의 해상교통류분석(I) (Macroscopic Analysis of Traffic Flow in the Korean Coastal Waterway)

  • 이철영;문성혁;최종화;박양기
    • 한국항해학회지
    • /
    • 제10권2호
    • /
    • pp.31-55
    • /
    • 1986
  • Generally, the development of shipping is characterized by the amount of traffic flow (traffic volume) and seaborne cargo in the sea. Movement of ships is an essential element of constructing the traffic flow which is represented the dynamic movement of ships in the sea, but on the other band the numbers of arriving and departing the port is the basic factor consisting of the static movement of ships. The amount of cargoes by coastal vessels and ocean trade vessels have increased tremendously with the great growth of the Korean economy these days. This increase of the seaborne cargoes has made the Korean coastal traffic flow so congested that this can be a cause of large pollution as well as great marine casualities such as a loss of human lives and properties . And also the future coastal traffic is expected to increase considerably according to our economic development and high dependence upon foreign trade. Under the circumstance, to devise the safety of coastal traffic flow and to take a proper step of a efficient navigation, there is a necessity for analyzing and surveying the coastal traffic trend and the characteristics of cargo movement. In order to grasp the dynamic movement of ships in the Korean coast, O/D analysis is executed. This paper aims to secure the basic data necessary for a comprehensive plan and estimation of vessel traffic management system for the enhancement of safety, order and efficiency of vessel traffic in the Korean coast. The analyzed results of the traffic flow and seaborne cargoes of the Korean coast are summarized as follows : 1) The congestion by the vessels occurred around the ports such as-in proportion of ship's number (proportion of tonnage) -Incheon 18.5%(14.8%), Pohang 5.9% (9.9%), Samil 5.2%(8.3%), Mokpo 8.6%(0.8%), Pusan 13.5%(36.4%), Ulsan 9.1%(16.2%). 2) It is found that the area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed thatthe area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed that the coastal vessels are main elements constituting the coastal traffic and that there are much traffic flow among five ports as following through the precise O/D analysis of ship's coastal movement. Incheon-Samil, Ulsan, Pusan, Jeju Pusan -Samil, Ulsan, Incheon, Jeju Pohang -Samil, Inchoen, Jeju Pohang -Samil, Incheon, Jeju Ulsan -Samil, Incheon, Jeju Samil -Ulsan, Pusan, Incheon 4) The amount of cargoes to abroad are in proportion about 81% of total and the amount of coastal cargoes are about 19%. Of those, cargoes in and out to Japan are about 26% and to South-east Asia are about 27%. 5) The chief items of foreign cargoes are oil(38.33%), iron ore(13.98%), bituminoous coal(12.74%), grain(8.02%), lumber(6.45%) in the import cargoes and steel material(21.96%), cement(17.16%), oil(6.81%), fertilizer(3.80%) in the export cargoes. 6) The 80.5% of total export cargoes and 92.4% of total import cargoes are flowed in five main ports. 7) The chief items of coastal cargoes are oil (42.45%), cement(16.86%), steel material (6.49%), anthracite(6.31%), mineral product(4.3%), grain, and fertilizer. Almost 92.24% of total import and export oil cargoes in Korea is loaded and unloaded at the port of Samil & Ulsan.

  • PDF

IEEE 802.11ac DL MU-MIMO MAC의 QoS 정책을 고려한 TXOP 공유 방안 (A TXOP Sharing Scheme for QoS Strategy of IEEE 802.11ac DL MU-MIMO MAC)

  • 이지영;석승준
    • 디지털융복합연구
    • /
    • 제12권10호
    • /
    • pp.317-327
    • /
    • 2014
  • IEEE 802.11ac 무선 랜에서는 무선 채널의 효율성을 높이기 위하여 공간 분할된 다중채널을 활용하여 AP로부터 다중의 단말기들을 향해 서로 다른 프레임들을 동시에 전송할 수 있는 DL MU-MIMO MAC 기술을 도입하였다. IEEE 802.11ac DL-MIMO MAC 기술은 기존 DL SU-MIMO MAC 동작의 두 단계 동작인 무선채널 획득단계와 프레임 전송단계 사이에 TXOP 기간 동안 채널별 목적지 단말기와 전송될 프레임을 선정하는 TXOP 공유단계가 있다. 따라서 IEEE 802.11ac의 MAC 성능을 향상시키기 위해서는 TXOP 공유단계의 성능이 중요하게 고려되어야 한다. 하지만 표준에서 예시적으로 제시한 우선순위 TXOP 공유방식은 버퍼와 버퍼 내 프레임에 대하여 공정하게 다루지 못하고, 많은 지연시간과 특정 버퍼에 대해서는 높은 손실률을 일으키는 문제점이 있다. 본 논문에서는 각 AC가 가지고 있는 속성의 특성을 최대한 살기기 위하여 p-AC, 유사속성 s-AC, 전체 s-AC, 순으로 TXOP를 공유하는 방안을 제시한다. 이는 기존의 EDCA 특성을 해치지 않는 범위 내에서 차별화된 서비스를 제공할 수 있는 방법이다.

스크린 프린팅 방법으로 제작한 ZnS:(Cu, AL) 박막의 CNT 불순물 첨가에 의한 광학적 특성에 관한 연구 (Luminescence Characteristic of CNT Element in ZnS:(Cu, Al) Thin Film Fabricated by a Screen Printing Method)

  • 손봉균;신준하;배재민;이재범;김종수;이상남
    • 한국인쇄학회지
    • /
    • 제29권1호
    • /
    • pp.23-33
    • /
    • 2011
  • This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

담양 하천습지 내 단위 생태계의 분류 (Classification of Unit Ecosystems in Damyang Riverine Wetland)

  • 손명원;장문기;윤광성;최태봉
    • 한국지역지리학회지
    • /
    • 제19권1호
    • /
    • pp.1-13
    • /
    • 2013
  • 담양습지보호지역은 전남 담양군과 광주광역시 북구 일원에 지정되어 있으며, 그 면적은 $980,575m^2$이다. 본 연구의 목적은 담양하천습지를 세부 지형단위로 나누고, 각 지형단위에 대한 퇴적물을 분석하여, 하천습지를 이루는 단위 생태계를 세분화하는 것이다. 하천습지는 하도습지와 범람원, 구하도 습지로 구분할 수 있는데, 담양하천습지는 하도습지의 유형에 속한다. 하도습지의 세부 지형단위를 분류하기 위하여, 1단계로 항공영상을 획득하여 세부 지형단위를 분류하였으며, 2단계로 현지 연구를 통해 분류 내용을 수정 보완하였다. 본 연구에서 담양습지보호지역은 22개의 생태계 단위로 구분된다. 그들의 퇴적물의 물리적 화학적 특성은 공간적으로 다양하게 나타나는데, 이는 담양하천습지의 서식환경이 다양함을 보여주는 것이다. 본 연구의 결과를 바탕으로 담양하천습지보호지역을 보다 효율적으로 관리할 수 있는 전략을 세울 수 있을 것이다. 이를 위해 담양습지에 형성된 다양한 하천지형과 이들을 서식지로 하는 생물들 간의 관계에 대한 학제적 연구가 필요하다.

  • PDF

클러스터링 기반 인지 무선 애드혹 라우팅 프로토콜의 경로 복구 오버헤드 감소 기법 (A Method for Reducing Path Recovery Overhead of Clustering-based, Cognitive Radio Ad Hoc Routing Protocol)

  • 장진경;임지훈;김도형;고영배;김정식;서명환
    • 전기전자학회논문지
    • /
    • 제23권1호
    • /
    • pp.280-288
    • /
    • 2019
  • 인지 무선 기술을 활용하는 모바일 애드 혹 네트워크에서는 인지 무선 기술의 특성 (주 사용자의 등장으로 인한 채널 변경) 및 단말의 이동성으로 인한 빈번한 경로 단절이 발생하며, 이에 따라 경로 유지/복구 오버헤드가 크게 증가하고 컨트롤 메시지 혼잡에 따른 서비스 품질저하가 초래될 수 있다. 본 논문에서는 인지 무선 기술의 특성을 고려하여, 네트워크 캐싱을 활용한 경로 유지/복구 방법을 제안한다. 제안하는 기법에서는 단말이 경로 단절을 인지하더라도, 즉시 경로 재설정을 위한 메시지들을 발생시키지 않고, 전달받은 패킷을 저장한 채, 1) 주사용자가 비활성화 되는 것을 기다리고 2) 다른 플로우의 메시지를 오버히어링하여 유효한 우회로를 파악함으로써, 불필요한 컨트롤 메시지 발생을 최소화한다. 이후에도 경로복구가 이루어지지 않을 경우, 지역적인 경로복구 및 지연 전달방법을 적용함으로써, 메시지 전달률을 확보하게 된다. OPNET 시뮬레이션을 통한 성능 검증에 따르면, 제안하는 방법은 혼잡한 네트워크에서 기존 연구 대비 네트워크에 경로 복구를 위해 발생하는 컨트롤 메시지를 13.8% 감소시키며, 이로 인해 실시간성 트래픽의 전달 지연시간을 45.4% 줄일 수 있음을 확인하였다. 그럼에도 비실시간성 트래픽의 전달률을 14.5% 증가시키는 것을 확인할 수 있었다.

Inhibitory effects of the atypical antipsychotic, clozapine, on voltage-dependent K+ channels in rabbit coronary arterial smooth muscle cells

  • Kang, Minji;Heo, Ryeon;Park, Seojin;Mun, Seo-Yeong;Park, Minju;Han, Eun-Taek;Han, Jin-Hee;Chun, Wanjoo;Ha, Kwon-Soo;Park, Hongzoo;Jung, Won-Kyo;Choi, Il-Whan;Park, Won Sun
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제26권4호
    • /
    • pp.277-285
    • /
    • 2022
  • To investigate the adverse effects of clozapine on cardiovascular ion channels, we examined the inhibitory effect of clozapine on voltage-dependent K+ (Kv) channels in rabbit coronary arterial smooth muscle cells. Clozapine-induced inhibition of Kv channels occurred in a concentration-dependent manner with an half-inhibitory concentration value of 7.84 ± 4.86 µM and a Hill coefficient of 0.47 ± 0.06. Clozapine did not shift the steady-state activation or inactivation curves, suggesting that it inhibited Kv channels regardless of gating properties. Application of train pulses (1 and 2 Hz) progressively augmented the clozapine-induced inhibition of Kv channels in the presence of the drug. Furthermore, the recovery time constant from inactivation was increased in the presence of clozapine, suggesting that clozapine-induced inhibition of Kv channels is use (state)-dependent. Pretreatment of a Kv1.5 subtype inhibitor decreased the Kv current amplitudes, but additional application of clozapine did not further inhibit the Kv current. Pretreatment with Kv2.1 or Kv7 subtype inhibitors partially blocked the inhibitory effect of clozapine. Based on these results, we conclude that clozapine inhibits arterial Kv channels in a concentration-and use (state)-dependent manner. Kv1.5 is the major subtype involved in clozapine-induced inhibition of Kv channels, and Kv2.1 and Kv7 subtypes are partially involved.

절리암반에서의 주입재 유동특성에 관한 수치해석적 연구 (A Numerical Study on the Flow Characteristics of Grouts in Jointed Rock)

  • 김문상;문현구
    • 한국지반공학회지:지반
    • /
    • 제11권3호
    • /
    • pp.123-138
    • /
    • 1995
  • 절리암반내에서 이루어지는 주입재의 유동을 분석하기 위하여 서의 주입재 유동에 대한 전산실험을 수행하였다. 암반내 유체유 주입재의 전단강도와 점성도변화 특성을 반영하였다. 다양한 문제 극분포 발생장치 및 절리망 형성장치와의 연계성을 확보하였다. 주입재와 절리면과의 마찰에 의한 수두손실을 계산하기 위하였으며 주입재의 고화에 따른 유동멈춤현상을 반영하기 위하여다. Binghamian grout(이후 Bingham 주입재)와 Newtonian grout(이후 Nweton 주입재)의 유동특성에 관한 자료를 구하기 위하여 실험실 시험결과를 수식화하였다. 단일절리면에서의 주입재 유동특성에 대한 전산실험을 수행한 결과 평판모델에서는 발견할 수 없는 주입재의 채널유동을 확인할 수 있었다. 전단강도 및 점성도의 변화가 주입재 유동에 미치는 영향을 파악하여 주입관리와 주입재 선정을 위한 기본방안을 제시할 수 있었다. 또한 지하수의 유동이 주입재 유동에 미치는 영향을 분석하여 주입지역에 작용하는 수리구배와 주입압과의 관계를 도출하였다. 마지막으로 터널주변에서의 주입재 유동을 관찰하여 주입작업에 대한 이해를 증진시키고자 하였다.

  • PDF

피드백 에러가 있는 빔포밍 시스템에서 개선된 인덱스 배치기법 (Enhanced Index Assignment for Beamforming with Limited-rate Imperfect Feedback)

  • 박노윤;김영주
    • 대한전자공학회논문지TC
    • /
    • 제49권5호
    • /
    • pp.7-14
    • /
    • 2012
  • 양자화된 빔포밍 시스템은 정확한 채널 상태 정보를 특정 벡터로 구성된 유한 집합, 즉 코드북으로 양자화하여 원하는 벡터에 대응되는 인덱스만을 송신단으로 피드백함으로써 피드백 오버헤드 및 지연 등에 의해 발생되는 영향을 최소화한다. 이와 관련하여 전역 (exhaustive) 및 그룹화 (group-based)를 이용한 탐색 기반의 인덱스 재배치 기법을 통해 추가적인 비트의 요구없이 피드백 에러에 의한 성능저하의 최소화 기법에 대한 연구가 수행되었다. 본 논문에서는 기존에 연구되었던 인덱스 재배치 기법에 코드북 내 벡터간의 chordal 거리에 따른 최적 코드북 설계기법 통해 적응적 특성을 갖는 개선된 그룹화 기반의 코드북 인덱스 배치 기법을 제안한다. Monte-Carlo 기반의 모의실험에 의해 제안하는 기법은 송신 안테나 수가 4이고 LTE 코드북을 이용할 경우 인덱스 재배치 기법을 사용하지 않을 때보다 동일한 비트 에러율을 얻기 위해 0.5~1dB 성능이 향상되며, 기존 그룹화 기반의 인덱스 배치 기법보다는 동일 환경에서 0.1~0.2dB 성능이 향상된다.

LED-ID용 간섭채널환경하에서의 단극형 ZCD확산코드 적용 기법에 관한 연구 (A Study of applying Method of Unipolar-ZCD Spreading Code for LED-ID in Interference Environment)

  • 차재상;김진영;장영민;김종태;이경근;문경환
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권6호
    • /
    • pp.275-280
    • /
    • 2010
  • 최근 본 논문의 저자들은 국내에 LED 조명에 ID(Identification)를 부여하여 위치인식 기능을 수행하는 LED-ID 기술을 처음 제안하고 이에 대한 연구를 본격적으로 개시하였다. LED-ID가 적용될 수 있는 통신채널은 표면의 반사파로 인한 다중경로 간섭 성분이 존재하며 ID를 위하여 직교코드를 부여할 경우, 코드들의 상호상관에 의한 간섭성분이 존재하므로 이에 대한 해결방안이 요구되어 진다. 본 논문에서는 직교코드기반의 LED-ID 방식을 가정하였을 경우, 실내(Indoor)채널 환경에서 전송채널의 시간지연으로 인한 다중경로 간섭성분을 확산코드의 상관특성만으로 해결하여 높은 QoS(Quality of Service)를 확보할 수 있는 Unipolar ZCD(Zero Correlation Duration)확산코드 기반의 OOK(On-Off Keying)-CDMA(Code Division Multiple Access)기법을 저간섭 LED-ID기법으로 제안하고, 실내채널 환경에서의 모의실험을 통한 성능평가를 통해 제안한 시스템의 유용성을 입증하였다.