• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.148-151
• /
• 2005

A study on the microstructure and the texture of the samples after ECAP and subsequent heat treatment has been carried out. The specimens after ECAP showed a very fine grain size, a decrease of <100> // ND, and an increase of <111> // ND textures. The $\{111\}<112>,\;\{123\}<634>,\;\{110\}<001>,\;\{112\}<111>,\;\{110\}<111>,\;and\;\{013\}<231>$ texture components were increased in the specimens after the ECAP and subsequent heat-treatment at $400^{\circ}C$ for 1 hour. One of the most important properties in sheet metals is formability. The r-value or plastic strain ratio has been used as a parameter that expresses the formability of sheet metals. The change of the plastic strain ratios after the ECAP and subsequent heat-treatment conditions has been investigated and it was found that they were two times higher than those of the initial Al sheets. This could be attributed to the formation above texture components through the ECAP and subsequent heat-treatment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.84-84
• /
• 2010

In this study, we report on the novel lithographic patterning method to fabricate organic-semiconductor devices based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries (MIMIC) and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce the atomic layer deposition of $Al_2O_3$ film on pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated sub-micron sized pentacene FETs and measured their electrical characteristics.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.36-41
• /
• 2018

Metal 3D printing is very useful for making the injection molds containing complex conformal cooling channels. The most important issue of the 3D printed molds is cost and life cycle. However, powder bed fusion (PBF) methods are vulnerable to fatigue loading because of the presence of pores and rough surfaces. In the present study, the fatigue test was performed to obtain fatigue analysis input data for predicting the durability of a 3D printed injection mold core. The metal 3D printer used to manufacture the specimen was OPM250L from Sodick, and the metal powder material was maraging steel. The ultrasonic fatigue testing method was adopted for the fatigue test. A key advantage of the ultrasonic fatigue method is that $10^8{\sim}10^9$ long cycle test data or more could be obtained within a relatively short period. Based on the results of the experiment, the effect of heat treatment was negligible. However, there was an apparent difference in durability depending on the presence or absence of the surface treatment.

• 정보보호학회논문지
• /
• 제18권6B호
• /
• pp.199-206
• /
• 2008

Broadcast encryption is a cryptographical primitive which is designed for a content provider to distribute contents to only privileged qualifying users through an insecure channel. Anyone who knows public keys can distribute contents by means of public key broadcast encryption whose technique can also be applicable to many other applications. In order to design public key broadcast encryption scheme, it should devise some methods that convert a broadcast encryption scheme based on symmetric key cryptosystem to a public key broadcast encryption. Up to this point, broadcast encryption scheme on trial for converting from symmetric key setting to asymmetric public key setting has been attempted by employing the Hierarchical Identity Based Encryption (HIBE) technique. However, this converting method is not optimal because some of the properties of HIBE are not quite fitting for public key broadcast schemes. In this paper, we proposed new converting method and an efficient public key broadcast encryption scheme Pub-PI which is obtained by adapting the new converting method to the PI scheme [10]. The transmission overhead of the Pub-PI is approximately 3r, where r is the number of revoked users. The storage size of Pub-PI is O($c^2$), where c is a system parameter of PI and the computation cost is 2 pairing computations.

• East Asian Economic Review
• /
• 제24권4호
• /
• pp.441-468
• /
• 2020

Capital inflows have a strong presence that influences destination countries' development of institutions, which can in turn help resuscitate a stopped economy and re-attract capital that was lost during crises such as the recent public health crisis. While the previous literature emphasizes the mechanism that foreign investors press or even threaten the local government for change, this paper explores empirically whether institutional improvement can be achieved through the channel that host countries voluntarily reform institutions in anticipation of potential investments predicted by the exogenous geographical and cultural characteristics of the recipient countries. Given that countries with better institutional quality can accumulate larger FDI stocks, we still find that the need for more FDI, in contrast to FPI and debt, gives higher incentives to host countries to strategically improve their institutions before seeking capital overseas. Moreover, the predicted FDI exerts more prominent impacts on institutions on constraining elite than those involved in launching a business, enforcing contracts, and protecting properties. The results imply that a long-run plan for upgrading elite constraint institutions is crucial for a post-pandemic FDI reboot.

• Membrane and Water Treatment
• /
• 제13권5호
• /
• pp.219-225
• /
• 2022

5th Assessment Report of the Intergovernmental Panel on Climate Change Weather (AR5) predicts that recent severe hydrological events will affect the quality of water and increase water pollution. To analyze changes in water quality due to future climate change, input data (precipitation, average temperature, relative humidity, average wind speed, and solar radiation) were compiled into a representative concentration curve (RC), defined using 8.5. AR5 and future use are calculated based on land use. Semi-distributed emission model Calculate emissions for each target period. Meteorological factors affecting water quality (precipitation, temperature, and flow) were input into a multiple linear regression (MLR) model and an artificial neural network (ANN) to analyze the data. Extensive experimental studies of flow properties have been carried out. In addition, an Acoustic Doppler Velocity (ADV) device was used to monitor the flow of a large open channel connection in a wastewater treatment plant in Ho Chi Minh City. Observations were made along different streams at different locations and at different depths. Analysis of measurement data shows average speed profile, aspect ratio, vertical position Measure, and ratio the vertical to bottom distance for maximum speed and water depth. This result indicates that the transport effect of the compound was considered when preparing the hazard analysis.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권3호
• /
• pp.147-156
• /
• 2022

In this paper, we propose Time-Division-Multiplexing Tertiary Offset Carrier (TDMTOC), a novel GNSS modulation based on Tertiary Offset Carrier (TOC) modulation. The TDMTOC modulation multiplexes two three-level signals (i.e., -1, 0, and 1) while crossing over time, and is a type of TOC modulation designed specifically for signal multiplexing. The proposed modulation generates TDMTOC subcarriers of two different phases by simply combining two Binary Offset Carrier (BOC) subcarriers by addition or subtraction. TDMTOC has better correlation and spectral properties than conventional BPSK, BOC, and MBOC modulation techniques, and has good power and spectral efficiency since it can multiplex signals without power loss similar to time division multiplexing. To prove this, we introduce the multiplexing process of TDMTOC, and compare TDMTOC with Binary Phase Shift Keying (BPSK), BOC, Composite BOC (CBOC), and Time Multiplexed BOC (TMBOC) that are currently serviced in GNSS by simulations of various aspects. Through the simulation results, we prove that TDMTOC has better correlation property than modulations currently used in GNSS, less intersystem interference due to its wide spectrum property, and robustness in multipath and noise channel environments.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1036-1044
• /
• 2023

The combination of MCNP6 and the FISPACT codes was used to predict inventories of radioisotopes produced by neutron exposure of a sample in a research reactor. The detailed MCNP6 model of the Budapest Research Reactor and the specific irradiation geometry of the NAA channel was established, while realistic material cards were specified based on concentrations measured by PGAA and NAA, considering the precursor elements of all significant radioisotopes. The energy- and spatial distributions of the neutron field calculated by MCNP6 were transferred to FISPACT, and the resulting activities were validated against those measured using neutron-irradiated small and bulky targets. This approach is general enough to handle different target materials, shapes, and irradiation conditions. A general agreement within 10% has been achieved. Moreover, the method can also be made applicable to predict the activation properties of the near-vessel concrete of existing nuclear installations or assist in the optimal construction of new nuclear power plant units.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.418-424
• /
• 2023

본 연구에서는 더블게이트 실리콘 나노시트 (SiNS) 피드백 전계효과 트랜지스터(FBFET)의 전기적 특성에 열처리가 미치는 영향을 분석하였다. 1000 초 동안 바이어스 스트레스를 인가했을 때 더블게이트 SiNS FBFET는 inversion layer의 전자에 의한 계면 트랩의 증가로 인해 채널 모드와 무관하게 negative bias stress 보다는 positive bias stress의 영향을 더 많이 받았다. 300 ℃에서 10 분 동안 열처리를 진행한 이후 소자는 원래의 특성을 완전히 회복하였으며 다시 1000 초 동안 바이어스 스트레스를 인가해도 특성이 변하지 않았다.

• The Korean Journal of Physiology
• /
• 제27권1호
• /
• pp.93-105
• /
• 1993

The present study was performed to investigate the properties of ionic currents elicited by voltage pulses in the unfertilized eggs of mouse and hamster by using the whole cell voltage clamp techniques and to find out if there are any differences in properties between eggs of the two rodents. In addition, the modulatory effect of G proteins and protein kinase C (PKC) on the ionic channels were observed. The inward current in hamster eggs was shown to be due to $Ca^{2+}\;current\;(i_{ca})$). The current voltage relations of these currents in hamster egg were analogous to those in mouse eggs. The amplitude of $i_{ca}$ in the hamster egg was larger than that in the mouse egg ($-3.12{\pm}1.07\;nA\;vs.\;-1.71{\pm}0.71\;nA,\;mean{\pm}\;SD$). These results suggest that the $Ca^{2+}$ channels in both kinds of eggs have similar channel properties but their density, and/or conduct ance per unit area is higher in hamster eggs than in mouse eggs. Outward currents in eggs of both mouse and hamster were carried by $K^+$. In hamster eggs, they appeared to comprise at least two components; a transient outward component ($i_{to}$) and a steady state component ($i_{\infty}.$ The $i_{to}$ was found to be dependent on intracellular $Ca^{2+}$ concentration; whereas on the other hand $i_{\infty}\;was\;Ca^{2+}$-independent. $Ca^{2+}$ currents were increased in eggs treated with GTP (or $GTP{\gamma}S$) or fluoroaluminate ($AIF_4^-$). In the hamster egg these increments were antagonized by GDP (or $GDP{\beta}S$) application. In contrast to the enhancement of $i_{ca},\;i_k$ was reduced following GTP (or $GTP{\gamma}S$) perfusion in mouse eggs. The transient component ($i_{to}$) in hamster eggs was increased by adding GTP but decreased by phorbol ester, TPA or dioctanoyl glycerol (DOG). Simultaneous application of $GTP{\gamma}S$ and DOG suppressed $i_{to}$ more effectively than a single application or DOG or TPA. From the above results, we have shown that ionic currents elicited by voltage pulses existed in the unfertilized eggs of mouse and hamster. There are at least two types of currents, $i_{ca}\;and\;i_k$ in mouse eggs, while three types, $i_{ca},\;Ca^{2+}$-dependent $i_k$ and $Ca^{2+}$-independent $i_k$ exist in hamster eggs. ionic channels in these eggs may be regulated either directly by GTP and PKC or indirectly by the substances linked with GTP and PKC.