• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.8 s.338
• /
• pp.53-60
• /
• 2005

Recently, sub-micron CMOS technologies have taken the place of III-V materials in a number of areas in integrated circuit designs, in particular even for the applications of gjgabit optical communication applications due to its low cost, high integration level, low power dissipation, and short turn-around time characteristics. In this paper, a four-channel transimpedance amplifier (TIA) array is realized in a standard 0.35mm CMOS technology Each channel includes an optical PIN photodiode and a TIA incorporating the fully differential regulated cascode (RGC) input configuration to achieve effectively enhanced transconductance(gm) and also exploiting the inductive peaking technique to extend the bandwidth. Post-layout simulations show that each TIA demonstrates the mid-band transimpedance gain of 59.3dBW, the -3dB bandwidth of 2.45GHz for 0.5pF photodiode capacitance, and the average noise current spectral density of 18.4pA/sqrt(Hz). The TIA array dissipates 92mw p in total from a single 3.3V supply The four-channel RGC TIA array is suitable for low-power, high-speed optical interconnect applications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.133-139
• /
• 2017

Flight control computer of tiltrotor UAV was designed by redundancy system with primary and secondary channels to improve reliability. The redundancy functions consist of channel switching and data recovery. The channel switching function consists of software method by using cross channel data link and hardware method by using watchdog timer. The data recovery is the function to maintain flight condition when the flight control computer is restarted exceptionally in operation. The redundancy system was verified by flight control computer bench test, system integration test and HILS test. This paper describes the redundancy function of tiltrotor UAV flight control computer and test-verification method.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.15-28
• /
• 2016

It is necessary to analyze underwater acoustics channel(UAC) modeling and simulation for underwater weapon system development and acquisition. In order to analyze UAC, there are underwater acoustics propagation numerical analysis models(Ray theory, Parabolic equation, Normal-mode, Wavenumber integration). However, If these models are used for multiple frequency signal analysis, they are inaccurate to calculate result of analysis effectiveness and restricted for signal processing and analysis. In this paper, to overcome this problem, we propose simple/multiple frequency signal analysis model of the Pseudospectral Time-Domain Method synthetic environment UAC applied to underwater environment noise model as like as realistic underwater environment. In order to confirm the validation of the model, we performed the 9 scenarios simulation(4 scenarios of single frequency signal, 4 scenarios of multiple frequency signal, 1 scenario of single/multiple frequency signal like submarine radiated noise) for validation and confirmed the validation of this model through the simulation model.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.514-524
• /
• 2007

Recent advances in the speed of multi-rate wireless local area networks (WLANs) and the proliferation of WLAN devices have made rate adaptive, opportunistic scheduling critical for throughput optimization. As WLAN traffic evolves to be more symmetric due to the emerging new applications such as VoWLAN, collaborative download, and peer-to-peer file sharing, opportunistic scheduling at the downlink becomes insufficient for optimized utilization of the single shared wireless channel. However, opportunistic scheduling on the uplink of a WLAN is challenging because wireless channel condition is dynamic and asymmetric. Each transmitting client has to probe the access point to maintain the updated channel conditions at the access point. Moreover, the scheduling decisions must be coordinated at all clients for consistency. This paper presents JUDS, a joint uplink/downlink opportunistic scheduling for WLANs. Through synergistic integration of both the uplink and the downlink scheduling, JUDS maximizes channel diversity at significantly reduced scheduling overhead. It also enforces fair channel sharing between the downlink and uplink traffic. Through extensive QualNet simulations, we show that JUDS improves the overall throughput by up to 127% and achieves close-to-perfect fairness between uplink and downlink traffic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.639-647
• /
• 2019

Recently, as the semiconductor integration technology due to miniaturization and high density of electronic equipment have developed, it is importantly recognized the application of thermal control system in order to release inner heat generated from chips, modules, In this study, we considered the heat transfer and pressure drop characteristics in a horizontal channel with four blocks using k-${\omega}$ SST turbulence model During CFD (Computational Fluid Dynamics) analysis, the parameters applied block width, block height, heat source and turbulence generator placement etc. As the boundary conditions of analysis, the channel inlet temperature and flow velocity were respectively 300 K and 3.84 m/s, the heat flux was $358W/m^2$. As a result, the heat transfer performance was decreased as the block width ratio (w/h) was increased, while it was increased as the block height ratio (h/w) was increased. In addition, as the arrangement of heat source size was increased to high heat flux from low heat flux, it was influenced by heat source size and the heat transfer coefficient showed a tendency to increase, When the turbulence generator was installed in the upper part of block No. 1 position the closely to the channel entrance, the heat transfer characteristics was greatly influenced on the whole of four heating blocks. and in oder to consider the pressure drop characteristics, we are able to select the most appropriate turbulence generator's position.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1407-1412
• /
• 2004

The velocity and pressure fields of a ship's propulsion mechanism of Weis-Fogh type are studied by advanced vortex method. The wing of NACA0010 type and the channel are approximated by a finite of source and vortex panels, and the free vortices are introduced from the surface of their bodies. The viscous diffusion of fluid is represented by the core-spreading method. The velocity field is calculated on the basis of Biot-Savart law and the pressure field is calculated from the integration equation formulated by Uhlman. The flow fields of this propulsion mechanism are unsteady and complex, but the flow fields are clarified by numerical simulation.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.1023-1028
• /
• 2008

Recently the advent of web 2.0 era is an important trend in the business environmental change. Web 2.0 era means users' active participation, share, and openness, develop 'Internet penetration into everyday life,' and change many aspects of our society. web 2.0 has been making these following changes in the socioeconomic aspects: 1) acceleration of system shift to a small quantity of multi-species production system 2) growing influence of on-line channel/information to consumers 3) various minorities' power increase in the socioeconomic sector. Web 2.0 has been making these following changes in the firms' strategies for information management: 1) increase of external knowledge and information utilization 2) amplification and reproduction of information from customers 3) change of information distribution: pursuit of two-way communication with customers 4) integration of different information/services for business transformation. Firms must squarely look at socioeconomic changes owing to web 2.0, and utilize them for firms' effective information management.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.352-357
• /
• 2000

A full-scale driving simulator is being developed as an effective test-bed for reproducing realistic driving situation in a safe and tightly controlled environment and conducting various human sensibility ergonomics studies. The simulator will be equipped with a 6 degree-of-freedom, high frequency motion base and a 4 channel, wide field-of-view visual system. The simulator will be fully interactive, highly realistic, and yet economical, taking advantages of the fast growing PC technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.64-70
• /
• 2009

A 6-Gbps feed-forward equalizer having a 6.2-dB gain at 3GHz is designed in 0.13-um CMOS technology and the equalizer helps error-free data recovery over a 7-m SATA cable with 14.7dB loss. Based on a differentially-connected varactor, the proposed equalizer uses only a one-fourth varactor size of a conventional equalizer, which enables the equalizer's integration in a pad-frame, high operating frequency, and low power dissipation of 3.6mW.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.112-117
• /
• 2016

This paper presents a half-rate current-integrating DFE receiver with sub-unit interval (sub-UI) inter-symbol interference (ISI) cancellation. By having a single additional DFE tap in each data path, the proposed DFE receiver can minimize BER degradation due to input pattern dependency and feedback tap latency problems in conventional current-integrating DFE receivers. The proposed DFE receiver was designed and fabricated in a 45 nm CMOS process, whose measurement results indicated that the BER bathtub width is increased from 0.235 UI to 0.315 UI (34% improvement) at $10^{-12}$ BER level.