• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2005년도 추계학술대회 및 정기총회
• /
• pp.321-333
• /
• 2005

With the limited frequency spectrum and an increasing demand for cellular communication services, the problem of channel assignment becomes increasingly important. However, finding a conflict free channel assignment with the minimum channel span is NP hard. As demand for services has expanded in the cellular segment, sever innovations have been made in order to increase the utilization of bandwidth. The innovations are cellular concept, dynamic channel assignment and hierarchical network design. Hierarchical network design holds the public eye because of increasing demand and quality of service to mobile users. We consider the frequency assignment problem and the base station placement simultaneously. Our model takes the candidate locations emanating from this process and the cost of assigning a frequency, operating and maintaining equipment as an input. In addition, we know the avenue and demand as an assumption. We propose the network about the profit maximization. This study can apply to GSM(Global System for Mobile Communication) which has 70% portion in the world. Hierarchical network design using GA(Genetic Algorithm) is the first three-tier (Macro, Micro, Pico) model, We increase the reality through applying to EMC (Electromagnetic Compatibility Constraints). Computational experiments on 72 problem instances which have 15${\sim}$40 candidate locations demonstrate the computational viability of our procedure. The result of experiments increases the reality and covers more than 90% of the demand.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.171-174
• /
• 2000

In this paper, We try to design combined source-channel coder that is compatible with video coding standards. This MAP decoder is proposed by adding semantic structure and semantic constraint of video coding standards to the method using redundnacy of the MAP decoders proposed previously. Then, We get the better performance than usual channel coder＇s.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.683-688
• /
• 1999

This paper describes design of equalizer chips of the read channel for high-density hard-disk drives. In order to meet increasing need of hard-disk drives, the read channel incorporates various PRML schemes. They require proper equalization to implement the efficient hardware of Viterbi decoders. This paper describes EPR-IV equalization for the read channel and a 200MHz analog FIR filter chip is presented which utilizes the sampled analog signal processing efficiently.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.148-155
• /
• 2003

In this paper, based on the concept of solid particles' hovering problem the working formula for the channel design of a Decanter-type centrifuge were derived. The Shields' diagram and its curve-fitting formula were used in determining the criterion of particle size for the sediment. By using these formula the designer can determine the sectional configuration of the channel, such as the liquid depth, the normal pitch of the screw-blade arrangement and the bowl diameter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.839-842
• /
• 1998

The wide spread of multimedia system demands a large viewin gdesply device which can inform a message to many peoples in open area. This paper is about the design, simulating and testing of a large viewing LED pannel control ASIC(application specific integrated circuit). This LED pannel control ASIC runs on 16 bit microprocessor MC68EC000 and has following functions:16 line interlaced LED pannel controller, memory controller, 16 channel priority inerrupt controller, 2 channel direct memory access controller, 2 channel 12 bit clock and timer, 2 channel infrared remocon receiver, 2 channel RS-232C with 16byte FIFO, IBM PC/AT compatible keyboard interface, battery backuped real time clock, ISA bus controller, battery backuped 256 byte SRAM and watech dog timer. The 0.6micron CMOS sea of gate is used to design the ASIC in amount of about 39,000 gates.

• 전자공학회논문지A
• /
• 제32A권6호
• /
• pp.19-28
• /
• 1995

In this paper, measured iris transmission loss data and simulated data by using 3-dimension full-wave analysis S/W are presented and compared with Marcuvitz's theory. And by using measured iris data, dual-mode narrow-band channel filters can be successfully implemented. This paper shows that there is severe difference between the transmission loss of iris calculated by using Marcuvitz's equation to calculate iris dimension, if the length of slot iris is longer than .lambda./.pi., and in the long urn the response of channel filter is distorted. Experimental result shows that the characteristic response of implemented channel filter by using the iris transmission loss graph presented here matches well the design specfications. In conclusion, iris transmission loss measurement method will be very useful to design channel filter.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.276-279
• /
• 2002

A problem formulation and solution for design optimization of laminated composite channel section beam is presented in this study. The objective of this study is the determination of optimum section dimensions of composite laminated channel section beam which has equivalent flexural rigidities to flexural rigidities of steel channel section beam. The analytical model is based on the laminate theory and accounts for the material coupling for arbitrary laminate stacking sequence configuration. The model is used to determine the optimal section dimensions of composite channel section beam. The web height, flange width and thickness of the beam are treated as design variables. The solutions described are found using a global search algorithm, Genetic Algorithms (GA).

• 대한기계학회논문집B
• /
• 제33권5호
• /
• pp.311-317
• /
• 2009

Due to extremely small device size and velocity scale, mixing in microchannel take place very slowly by way of molecular diffusion transport. Mixing enhancement becomes a central issue in microfluidics for biomedical and chemical applications. In this work, The optimization results and validation through experiment and fabrication. In this efficient micromixer design, it is essential to evaluate mixing efficiency with good precision. Mixing efficiency for Y-channel micromixer is measured by fluorescence intensity using LIF(Laser Induced Fluorescence) Confocal Microscope. The Y-channel micromixers are fabricated with polydimethylsiloxane(PDMS). Nile Blue A is injected into the micromixer as a fluorescence dye for measuring of fluorescence intensity by He/Ne laser. Throughout the experiments and computer simulation, accurate mixing efficiency evaluation process for a PDMS Y-channel micromixer is established.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.11-33
• /
• 1996

This work aims at examining the navigational safety of the entrance channel of Inchon harbour and suggesting the way to improve ship's navigation of the navigational safety at Inchon, that small ships such as fishing boats and barges coming out of the harbour through the East Channel cause major threat to the inbound large ships using the channel. An additional new waterway, therefore, has been recommended to be established in the middle of the East and West Channels so that the outbound small ships can use it. A waterway design simulation methodology has been applied to examin the sagety of the newly suggested channel. Minor chansge has been made to the original design after the simulation experiment, and the corrected final design of the waterway has been suggested to be implemented as soon as possible.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.706-712
• /
• 2004

본 논문에서는 Ka대역 위성 중계기용 출력 멀티플렉서의 설계 및 제작에 대하여 언급하였다. 출력 멀티플렉서는 저역통과필터, 채널필터, 매니폴드(Manifold)로 구성되어 있으며, 위성 중계기의 무게와 부피를 최소화하기 위하여 채널필터는 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널필터는 4차 타원 응답형으로 설계하였으며, 저역통과 필터는 13차 corrugated 형으로 설계하였다. 채널필터와 매니폴드의 초기 설계 후 최적화 과정에 있어서 모든 설계 변수를 최적화시키는 대신 일부의 설계 변수만을 최적화시킴으로써 용이하게 최적화 설계할 수 있음을 확인하였다. 제작한 Ka 대역 위성 중계기용 출력 멀티플렉서의 측정결과는 설계결과와 동일한 특성을 나타내었다.