• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.39-41
• /
• 2005

The population of diabetes is continuously increasing because of the economic development and the lifestyle modification. If diabetes become chronic condition, it can cause various complications. Among many other complications, diabetic foot is the most fatal issue since it may require amputation of the legs. Diabetic foot has three different types such as neuropathic, neuro-ischemic and ischemic. Among these types, patients of neuropathic foot experience sensory abnormality. Nerve conduction velocity (NCV) is used for diagnosing neuropathic foot but this method uses strong electric stimulus to cause severe pain to the patients In this study, two channel photo-plethysmography was used as noninvasive screening tool for distinguish neuropathic foot and normal group by observing blood flow of both finger and toe simultaneously.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1870-1877
• /
• 1990

The electromagnetic properties of P- and n-channel split drain magnetic sensitive MOSFET fabricated using 2\ulcorner design rules and CMOS process technology has been investigated. The achieved output voltage in the double drain MOSFET was 160mV at 10\ulcorner drain current and magnetic flux density of 10kG, and the sensitivity was 1.6x10**3 V/A\ulcornerG. A further higher sensitivity was obtained by introducing a third drain in the split region. In this case, the triple drain MOSFET showed a much higher sensitivity of 2x10**3 V/A\ulcornerG under the same condition. Also, the linearity of output voltage vs. magnetic flux density was excellent.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.64-72
• /
• 1995

In this paper, atmospheric turbulence and absorption under clear weather condition, which affect the optical satellite up-link communication between geo-satellites and earth station, were studied. In case of the up-link communication, the received optical power is weakened by pointing loss caused by beam tilt which is the main effect of turbulent atmosphere. This pointing loss directly has relation to the diameter of optical transmitting antenna. From the inverse proportion of the pointing and spaced loss, it is the regions where the diameter of transmitting antenna increases abruptly and the efficient design of transmitting antenna is impossible. In case of using channel coding, it was shown that the peak value of diameter moved to the lower regions of elevation angle with increasing the coding gain and its width was also decreased. In case of considering both coding gain and transmission rate on the design of transmitting antenna, it was known that more coding gain was necessary as transmission rate was increased.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.54-60
• /
• 1994

In this paper, we present the analytical models for the change of the lateral electric field distribution and the velocity saturation region length with the electron trapping of stressed SC-PMOSFET in the saturation region. To derive the hot-electron-induced lateral electric field of stressed SC-PMOSFET. Ko's pseudo two dimensional box model in the saturation region which illustrates the analysis of the velocity saturation region is modified under the condition of electron trapping in the oxide near the drain region. From the results, we have the following lateral electric field in the y-direction, that is, E(y) ES1satT.cosh(y/l) qNS1tT.sinh(y/l)/lCox. It is shown that the trapped electrons influence the field in the drain region. decreasing the lateral electric field. Calculated velocity saturaion length increases with the trapped electrons. increasing the drain current of stressed SCPMOSFET. This results well explain the HEIP phenomenon of PMOSFET's.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.35-41
• /
• 2017

We propose a novel multi-photodiode array (MPDA) based retinal implant IC with on/off stimulation strategy for a visual prosthesis with improved spatial resolution. An active pixel sensor combined with a comparator enables generation of biphasic current pulses when light intensity meets a threshold condition. The threshold is tuned by changing the discharging time of the active pixel sensor for various light intensity environments. A prototype of the 30-channel retinal implant IC was fabricated with a unit pixel area of $0.021mm^2$, and the stimulus level up to $354{\mu}A$ was measured with the threshold ranging from 400 lx to 13120 lx.

• Journal of ILASS-Korea
• /
• v.12 no.1
• /
• pp.45-57
• /
• 2007

This paper presents both experimental and numerical studies regarding nozzles used for the SI engine application, particularly for the intake-port fuel injection type. The atomization mechanism of the multi-hole plate nozzle was investigated experimentally. It was found that the nozzle design added turbulence into the liquid-film jet and the jet disintegrated rapidly. Based on the results, various plate types for the nozzle were developed and tested; six hole nozzle for liquid jet interaction, plate-type nozzle with flat duct channel, and the simpler structured nozzle. The spray characteristics of the prototype nozzles were examined experimentally while the internal flow of the nozzle was investigated computationally. It was shown that turbulent liquid-film was injected and atomization quality was improved by controlling the internal flow condition of the plate-type nozzle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.1-11
• /
• 1999

The three-dimensional laminar mixed convection flow between the conductive printed circuit boards. on which the heat generating rectangular blocks are uniformly distributed, has been examined in the present study. The flow and heat-transfer characteristics are assumed to be pseudo periodic in the streamwise direction and symmetric in the cross-stream direction. Using an algorithm of SIMPLER, the continuity equation. the Navier-Stokes equations and the energy equation are solved numerically in the three-dimensional domain Inside the channel. The convective derivative terms are discretized by the QUICK scheme to accurately capture the flow field. The flow and the heat transfer characteristics are thoroughly examined for various Re and Gr.

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.747-757
• /
• 2004

The objectives of this study were to investigate the physical, chemical, and structural characteristics of the stream, especially Mugeo and Yeochon which are being changed to ecological stream by Ulsan city, and to acquire the considerations such as the planning element and plan criteria of the streams for making ecological stream system. Water quality, water quantity, vegetation, in stream structures and facilities, and land usage of the streams were investigated and the build up capabilities of ecological stream for the two streams were also analyzed. Planning elements for restoration to ecological stream included physical and biological purification methods in water quality, short term water acquire alternatives in water quantity, and vegetation recovery plan and improvement of habitation environment in ecological system, respectively. Planing elements in physical structures and facilities also included recovery of concrete levee and removal and recovery of covered channel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.268-269
• /
• 2008

We have examined the effect of physical drying and annealing conditions for the soluble derivatives of polythiophene as p-type channel materials of organic thin film transistors (OTFTs) in our special designed drying system; performances of the jetting-processed OTFTs can be improved more than 10 times just by optimizing the physical conditions of drying and annealing.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.10
• /
• pp.703-712
• /
• 1987

A position detection method for 2 phase bifilar permanent magnet step motors is proposed. The back emfgenerated on 2 phase windings by rotor permanent magnet is calculated using motor terminal voltage and current by analog circuit, and the rotor position output is obtained from tese back emf signals through some logical manipulation circuit. This position detector functionally acts like a 2 channel optical incremental encoder, and it is also shown by experimental results that it works well over wide range of speed or under resonant condition where the rotor rings around the detent position. Its resolution is twice of the number of steps per revolution. Bu software implemented on micro-processor, the reliability of position output is enhanced, detecting and correcting error dut to external and/ or internal noise.