• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.85-100
• /
• 1991

In the discussion of digital mobile communication systems the speech coder based on the high quality low bit rate is an essential part of topics to overcome the limited availability of radio spectrum, which will enhance the communication services. In this paper we present the implementation and performance evaluation of 13kbps RPE LTP speech coder. An implementation of a real time full duplex coder with 75% of DSP loading rate using a single DSP chip has been shown, and also the fixed point simulations for H/W implementation has been performed. Finally, analysis result for relative bit importance of each transmitting parameter has been shown for channel coding.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.61-68
• /
• 2006

As high speed Internet service technology develops. many people are accessing wireless internet service by using mobile devices. However. an HTLM web page for PC is not very compatible with wireless internet because of its unnecessary advertisements, high resolution. and various multimedia data. This is because the main focus when creating it was on high speed. As this research indicates with the RSS channel. converted from the main part of the HTLM web page, which users show interest in. a wireless compatibleinternet page can easily be created. Consequently, web administrators could create a wireless page easily and quickly, and wireless users would be able to find information in the same manner.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.657-662
• /
• 2019

The power consumption of wearable sensors and electrocardiogram regulators should be very low to extend the network lifetime and anticipated QoS( : Quality of Service) control such as error correction and authentication of data processed by WBAN( : Wireless Body Area Network) nodes is important. Therefore, QoS control is the most urgent concern to implement WBAN in health monitoring regulations. For optimal QoS control, we compare the energy efficiency and the average number of transmissions with IEEE 802.15.6 and the error correction method considering energy efficiency. The performance of the proposed error correction technique shows that the energy efficiency and the transmission rate are improved by adjusting the coding rate appropriately using the channel estimation.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2020

In this paper, the authors propose the pseudo complex correlation coefficient (PCCC) of the two complex random variables (RV), because the four real correlation coefficients (RCC) of the corresponding four real RVs cannot be obtained only from the complex correlation coefficient (CCC) of given two complex RV. Such observation is motivated by the general statement; "The complex jointly-Gaussian random M-vector cannot be completely described by the complex covariance matrix, even though the real Gaussian random 2M-vector can be completely descried by the real covariance matrix. Therefore, in order to describe completely the complex jointly-Gaussian random M-vector, we need an additional matrix, namely the complex pseudo-covariance matrix, along with the complex covariance matrix." Then, we apply PCCC to correlated information sources (CIS) for non-orthogonal multiple access (NOMA) in 5G system, and investigate impact of the proposed PCCC on the achievable data rate of the stronger channel user in the conventional successive interference cancellation (SIC) NOMA with CIS. It is shown that for the given same CCC, the achievable data rates with the different PCCC are different, because the corresponding RCC are different. We also show that as the absolute value of the same CCC increases, the impact of the different PCCC becomes more significant.

• ETRI Journal
• /
• v.43 no.1
• /
• pp.109-119
• /
• 2021

Self-recovery is a tamper-detection and image recovery methods based on data hiding. It generates two types of data and embeds them into the original image: authentication data for tamper detection and reference data for image recovery. In this paper, a region-based scalable self-recovery (RSS) method is proposed for salient-object images. As the images consist of two main regions, the region of interest (ROI) and the region of non-interest (RONI), the proposed method is aimed at achieving higher reconstruction quality for the ROI. Moreover, tamper tolerability is improved by using scalable recovery. In the RSS method, separate reference data are generated for the ROI and RONI. Initially, two compressed bitstreams at different rates are generated using the embedded zero-block coding source encoder. Subsequently, each bitstream is divided into several parts, which are protected through various redundancy rates, using the Reed-Solomon channel encoder. The proposed method is tested on 10 000 salient-object images from the MSRA database. The results show that the RSS method, compared to related methods, improves reconstruction quality and tamper tolerability by approximately 30% and 15%, respectively.

• International Journal of Computer Science & Network Security
• /
• v.24 no.9
• /
• pp.41-49
• /
• 2024

This paper proposes dual symbol superposition block carrier transmission with frequency domain equalization (DSS-FDE) system. This system is based upon χ-transform matrix, which is obtained by concatenation of discrete Hartley transform (DHT) matrix and discrete Fourier transform (DFT) matrices into single matrix that is remarkably sparse, so that, as it will be shown in this paper, it only has non-zero entries on its principal diagonal and one below the principle anti-diagonal, giving it shape of Latin alphabet χ. When multiplied with constellation mapped complex transmit vector, each entry of resultant vector is weighted superposition of only two entries of original vector, as opposed to all entries in conventional DFT based OFDM. Such a transmitter is close to single carrier block transmission with frequency domain equalization (SC-FDE), which is known to have no superposition. The DSS-FDE offers remarkable simplicity in transmitter design and yields great benefits in reduced complexity and low PAPR. At receiver-end, it offers the ability to harvest full diversity from multipath fading channel, full coding gain, with significant bit error rate (BER) improvement. These results will be demonstrated using both analytical expressions, as well as simulation results. As will be seen, this paper is Part III of three-paper series on alternative transforms for multicarrier communication (MC) systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.101-111
• /
• 2008

This paper introduces a high-speed Reed-Solomon(RS) decoder, which reduces the hardware complexity, and presents an RS decoder based FEC architecture which is used for 40Gb/s optical communication systems. We introduce new pipelined degree computationless modified Euclidean(pDCME) algorithm architecture, which has high throughput and low hardware complexity. The proposed 16 channel RS FEC architecture has two 8 channel RS FEC architectures, which has 8 syndrome computation block and shared single KES block. It can reduce the hardware complexity about 30% compared to the conventional 16 channel 3-parallel FEC architecture, which is 4 syndrome computation block and shared single KES block. The proposed RS FEC architecture has been designed and implemented with the $0.18-{\mu}m$ CMOS technology in a supply voltage of 1.8 V. The result show that total number of gate is 250K and it has a data processing rate of 5.1Gb/s at a clock frequency of 400MHz. The proposed area-efficient architecture can be readily applied to the next generation FEC devices for high-speed optical communications as well as wireless communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.554-561
• /
• 2017

IoT (Internet of Things) devices are often located in environments where indoor or underground, signals are difficult to reach. In addition, the transmission power is low, the base station should be designed to be able to receive signals even at low reception sensitivity. For this reason, a device having a poor channel condition can be transmitted at a low data rate using a low coding rate or repetition. When the coverage class is divided according to the channel condition and the data rate, the packet length may vary from one coverage class to another, and the performance of the slotted aloha random access may be degraded. We will focus on two methods of using shared-resource and seperate resources among multiple slotted aloha methods. In particular, when devices with different coverage classes use shared resources, performance of a device with a bad channel condition may deteriorate. Conversely, when using separate resources for each coverage class, there is a problem that congestion may occur which increases the number of devices that perform random access to one resource area. In this paper, we propose some methods to overcome this problem. This study is mainly focused on MTC devices, and is considered to be a high possibility of future development.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1210-1230
• /
• 1997

In this paper, we suggest an architecture of DS/CDMA tranceiver composed of one pilot channel used as reference and multiple traffic channels. The pilot channel-an unmodulated PN code-is used as the reference signal for synchronization of PN code and data demondulation. The coherent demodulation architecture is also exploited for the reverse link as well as for the forward link. Here are the characteristics of the suggested DS/CDMA system. First, we suggest an interlaced quadrature spreading(IQS) method. In this method, the PN coe for I-phase 1st channel is used for Q-phase 2nd channels and the PN code for Q-phase 1st channel is used for I-phase 2nd channel, and so on-which is quite different from the eisting spreading schemes of DS/CDMA systems, such as IS-95 digital CDMA cellular or W-CDMA for PCS. By doing IQS spreading, we can drastically reduce the zero crossing rate of the RF signals. Second, we introduce an adaptive threshold setting for the synchronization of PN code, an initial acquistion method that uses a single PN code generator and reduces the acquistion time by a half compared the existing ones, and exploit the state machines to reduce the reacquistion time Third, various kinds of functions, such as automatic frequency control(AFC), automatic level control(ALC), bit-error-rate(BER) estimator, and spectral shaping for reducing the adjacent channel interference, are introduced to improve the system performance. Fourth, we designed and implemented the DS/CDMA MODEM to be used for variable transmission rate applications-from 16Kbps to 1.024Mbps. We developed and confirmed the DS/CDMA MODEM architecture through mathematical analysis and various kind of simulations. The ASIC design was done using VHDL coding and synthesis. To cope with several different kinds of applications, we developed transmitter and receiver ASICs separately. While a single transmitter or receiver ASC contains three channels (one for the pilot and the others for the traffic channels), by combining several transmitter ASICs, we can expand the number of channels up to 64. The ASICs are now under use for implementing a line-of-sight (LOS) radio equipment.

• Journal of Broadcast Engineering
• /
• v.14 no.5
• /
• pp.561-572
• /
• 2009

In this paper, we propose an efficient layer-separable PES packetization and processing scheme for DVB-S2 satellite broadcasting service based on SVC video. Unlike the conventional single layer-based video coding such as MPEG-2, MPEG-4 and H.264, SVC can combine numerous number of video layers, which are aggregated to a single bitstream. Therefore, it is necessary to devise a new PES packetization scheme that can efficiently separate multiple video layers of SVC. In order to combine the layered characteristics of the SVC video and the robust channel coding capability of LDPC (Low Density Parity Check) of DVB-S2 for unequal error protection, we propose an efficient PES packetization in the transmitter side and PES packet processing scheme in the receiver side of DVB-S2. We prove the effectiveness of the proposed scheme in terms of processing speed and time delay required for processing of the separated layers of SVC video in the satellite broadcasting service.