• Title/Summary/Keyword: changing time

Search Result 3,818, Processing Time 0.039 seconds

The Determination of TRC using an Electrochemical Method (II: Pt electrode) (전기화학적 방법의 TRC(Total residual chlorine) 측정 연구(II: Pt전극 이용))

  • Lee, JunCheol;Pak, DaeWon
    • Journal of Korean Society on Water Environment
    • /
    • v.30 no.3
    • /
    • pp.304-310
    • /
    • 2014
  • The conventional methods for total residual chlorine such as iodometry and DPD colorimetric can cause secondary pollution due to additional agents, also have a wide error range. As for alternative, electrochemical method can measure TRC(Total residual chlorine), and is not required as additional agents, also very suitable for using the fields of ballast water because test time is relatively fast. Therefore, this study was investigated for changing charge by agitation, salt concentration, and temperature change. Charge showed differences based on changes of reduction peak with or without agitation. In contrast, TRC and charge were well correlated in constant agitation speed. As TRC and charge were analyzed with high correlations in constant salinity and temperature of ocean, thereby conductivity was firstly measured, and charge had high correlation for TRC in spite of changing salinity and temperature Pt electrode revealed high reliability ($r^2=0.960$) because it was rarely effected by TRC, On the other hand, Au electrode appeared inadequate ($r^2=0.767$) to use sensor in less than 1.0 ppm of TRC. For high accuracy and detection of TRC, Pt and Au electrodes for test time were, respectively, 14 and 22 seconds. As a result, Pt electrode was more valuable than Au electrode in terms of response time.

LSTM based Network Traffic Volume Prediction (LSTM 기반의 네트워크 트래픽 용량 예측)

  • Nguyen, Giang-Truong;Nguyen, Van-Quyet;Nguyen, Huu-Duy;Kim, Kyungbaek
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2018.10a
    • /
    • pp.362-364
    • /
    • 2018
  • Predicting network traffic volume has become a popular topic recently due to its support in many situations such as detecting abnormal network activities and provisioning network services. Especially, predicting the volume of the next upcoming traffic from the series of observed recent traffic volume is an interesting and challenging problem. In past, various techniques are researched by using time series forecasting methods such as moving averaging and exponential smoothing. In this paper, we propose a long short-term memory neural network (LSTM) based network traffic volume prediction method. The proposed method employs the changing rate of observed traffic volume, the corresponding time window index, and a seasonality factor indicating the changing trend as input features, and predicts the upcoming network traffic. The experiment results with real datasets proves that our proposed method works better than other time series forecasting methods in predicting upcoming network traffic.

Development and Performance Evaluation of Radial Exhaust Multi-port System for Real-time Particle Size Distribution Measurement (실시간 입자분포 측정을 위한 Radial Exhaust Multi-port System의 개발 및 성능평가)

  • Lee, Hong Ku;Lee, Yang-Woo;Jeon, Ki Soo;Ahn, Kang-Ho
    • Particle and aerosol research
    • /
    • v.9 no.3
    • /
    • pp.133-137
    • /
    • 2013
  • Measuring particle size distribution is one of the primary concerns in aerosol studies. For a nano-particle size distribution measurement, many scientists use a combination of a differential mobility analyzer (DMA) and a condensation particle counter (CPC) system, which is a called scanning mobility particle sizer (SMPS). Although it has a very high particle size resolution, some issues still remain. These problems include residence time between a DMA and a CPC, discontinuity of a CPC, and disturbance due to long scanning time during the precise measurement of particles. In particular, long scanning time is not adequate for measuring particle size distribution since the particle concentration is changing during the measurement. In this study, we developed radial exhaust multi-port system (REM-system) with no scanning time and high resolution to measure real-time particle size distribution. As a result of the REM-system performed using mono-disperse particle, it is expected that this system will be suitable for measuring continuously changing aerosol. If the counting efficiency of multi-condensation particle counter (M-CPC) and data inversion matrix are completed, REM-system will be a very adequate system for unsteady aerosol, which changes for SMPS scanning time.

A Study on the Analysis of the Characteristics of the Real-time Behavior Space Design - Focused on the Works of onl and NOX - (물리구축환경의 지능적 부활로서의 실시간 행태 공간의 특성 분석 - onl과 NOX의 작품을 중심으로 -)

  • Lee Hanna;Park Hyun-Ok
    • Korean Institute of Interior Design Journal
    • /
    • v.14 no.4 s.51
    • /
    • pp.19-26
    • /
    • 2005
  • Digital technology continually makes a space evolves. The real-time behavior design communicates the data with the situation of circumference of the space(visitors moving, interior and exterior situations). The space form was changed because it interfaces in real time. The purpose of this study was finding out the characteristics of real-time behavior space design through the analysis of space formative languages, sensorium, S-R and material. This study will be the one of basic references for the digital space design. The boundary of this study set limits to the works of digital space designer who applies the real-time exchanging data to their design among the digital space design works from 1996 to 2004. But it excepted from the real-time behavior space in virtual realty. Therefore, the objects of this study were the works of onl and NOX(paraSITE, Trans-port 2001, Muscle, MotormeCCa, Handdrawspace, Saltwater Pavilion, Son-O-House, H2O Expo). The method was the contents analysis of space formative languages(Greg Lynn's ten space formative languages; bleb, blob, branch, flower, fold, lattice, teeth, shred, skins and strand), sensorium, S-R and material. The results of the study are as follows: 1) The organizational elements; Space formative languages(bleb, blob, fold, shred, skins, strand), stimulation(Human Participation, Human Moving, Weather Conditions), and response(Spatial Moving, Sound Pattern, Lighting Pattern, color Pattern, Activating Particles, Moving Picture, Virtual Friend) 2) The material Use; Sound, lights, and network have been used in the space. Immaterial matter will be used the main material of space design in 21"'century, 3)The spatial types; formal changing of space, projecting immaterial elements, and changing the sound.

Fast Channel Changing Technique to Deliver Enhanced IPTV User Experience (IPTV 사용자를 위한 빠른 채널 변경 기법)

  • Song, Young-Ho;Kwon, Taeck-Geun
    • Journal of Korea Multimedia Society
    • /
    • v.12 no.9
    • /
    • pp.1201-1209
    • /
    • 2009
  • Recently, the convergence of the telecommunications industry through the development of network media has brought along interactive data services in addition to the traditional broadcast services by providing direct connections between the users and the broadcasters. This can be easily achieved by the combination of existing network technology and multimedia technology, but in reality, as seen in the actual implementation of IPVT, it's difficult to provide satisfactory levels of service to users due to issues of network bandwidth and problems of streaming system. In particular, a network which is able to fully support Qos/QoE, and also a fast enough channel changing technology that is satisfactory to the user, are prerequisites for IPTV success. Therefore this thesis proposes a fast channel changing technique to delivery enhanced IPTV user experience. Recent IP set-top-boxes use only a small portion of the CPU to feed Ethernet packets to the hardware decoder and play them. Thus, by making IP set-top-boxes share cached channel information and content with each other, reducing the load on the server and enhancing the channel changing time is made possible.

  • PDF

A Study on the Changing of Housing Construction in Jeju-do by Statistical Data (통계자료를 기반으로 한 제주도 주택건축의 변화에 관한 연구)

  • Hwang, Yong-Woon
    • Korean Institute of Interior Design Journal
    • /
    • v.24 no.6
    • /
    • pp.13-21
    • /
    • 2015
  • The purpose of this study is to analyze the changing housing construction in Jeju-do which is composed of two cities(Jeju-si, Seogwipo-si). The number of indigenous population and migrating population of Jeju-do has been increasing every year because it has more beautiful scenery, interesting culture and a higher ratio of natural green area to urban area than other provinces(inland). More than 70% of population in Jeju-si is concentrated in dong-area. As a result, urban area and commercial area are expanding in entire Jeju-do. On the other hand, green area and non-urban area of Jeju-do are decreasing steadily. And there was a lot of changing during a short of time after 2010 because of internationalization and urban development etc.. This study is an analysis about the changing of housing in Jeju-do by statistical data. As a results of the analysis. I discovered that 1) The supply ratio of available housing in Jeju-do is higher than other inland cities in other parts of the country. 2) Housing constructing is influenced by moving-in and moving-out population. 3) There are more detached houses in Jeju-do than apartments. The opposite phenomenon occurs in other provinces (inland cities). However, the number of detached houses is gradually declining in Jeju-do since 2000. 4) Most detached homes in Jeju-do have an area of $60m^2{\sim}90m^2$. Most apartments have smaller areas than $60m^2{\sim}90m^2$. Seogwipo has homes with a larger area than Jeju-si. 5) The ratio of concrete structure houses is increasing at high speed because of constructing of apartment buildings, on the other hand, the ratio of brick structure house is decreasing gradually. Finally, Even though Jeju-do has different from housing culture of inland, it is changing slowly like inland housing types.

The Experience of the Family Whose Child Has Died of Cancer (암으로 자녀를 잃은 가족의 경험에 대한 질적연구)

  • 이정섭;김수지
    • Journal of Korean Academy of Nursing
    • /
    • v.24 no.3
    • /
    • pp.413-431
    • /
    • 1994
  • The purpose of this study was to build a substantive theory about the experience of the family whose child has died of cancer The qualitative re-search method used was grounded theory. The interviewees were 17 mothers who had cared for a child who had died of cancer Traditionally in Korea, mothers are the care givers in the family and are considered sensitive to the family's thoughts, feelings. The data were collected through in-depth interviews by the investigator over a period of nine months. The data were analyzed simultaniously by a constant comparative method in which new data are continuously coded into categories and properties according to Strauss and Corbin's methodology. The 16 concepts which were found as a result of analyzing the grounded data were, -left over time, the empty place, meaninglessness, inner sadness, situational sadness, heartache, physical pain, guilt, resentment, regret, support / stigmatization, finding meaning in the death, changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. Five categories emerged from the analysis. They were emptiness, consisting of left over time, the empty place and meaninglessness ; sadness, consisting of inner sadness and situational sadness ; pain, consisting of heartache and physical pain ; bitterness, consisting of guilt, resentment, regret, sup-port / stigmatization and finding meaning in the death : and transition, consisiting of changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. These categories were synthesized into the core concept, -the process of filling the empty space. The core phenomenon was emptiness. Emptiness varied with the passing of time, was perceived differently according to support / stigmatization and finding meaning in the death, was followed by sad-ness, pain, and bitterness, and finally resulted in changes in attitudes about life and living and about health, and in changes in religious practice and family relations. The process of filling the empty space proceeded by ① accepting realty, ② searching for the reason for the child's death, ③ controlling the bitter feelings, ④ reconstructing the relationships ameng death, illness and health and ⑤ filling the emptiness by resolving causes of child's death, adopting, having another child or with work. Six hypotheses were derived from the analysis. ① The longer the bereavement, the mere the empty space becomes filled. ② The longer the hospitalization, the more sup-port the family needs. ③ The more the sadness, pain and bitterness are expressed, the mere positive changes emerge. ④ Family support faciliates the process of filling the empty space. ⑤ Higher family cohesiveness faciliates the process of filling the empty space. ⑥ The greater the variety of reasons attributed to the child's death, the greater the variety of patterns of change. Four propositions related to emptiness and bitter-ness were developed. ① When the sense of emptiness is great and bitterness is manifested by severe feelings of guilt and resentment, the longer the process of fill-ing the empty space. ② When the sense of emptiness is great and the family is highly motivated to get rid of the bitterness, the shorter the process of filling the empty space. ③ When the sense of emptiness is less and bitter-ness is manifested by severe feelings of guilt and resentment, the process of filling the empty space is delayed. ④ When the sense of emptiness is less and the family is highly motivated to get rid of the bitterness, the process of filling the empty space goes on to completion. Through this substantive theory, nurses under-stand the importance of emptiness and bitterness in helping the family that has lost a child through cancer fill the empty space. Further research to build substantive theories to explain other losses may con-tribute to a formal theory of how family health is restored after human tragedies are experienced.

  • PDF

Dynamic OD Estimation with Hybrid Discrete Choice of Traveler Behavior in Transportation Network (복합 통행행태모형을 이용한 동적 기.종점 통행량 추정)

  • Kim, Chae-Man;Jo, Jung-Rae
    • Journal of Korean Society of Transportation
    • /
    • v.24 no.6 s.92
    • /
    • pp.89-102
    • /
    • 2006
  • The purpose of this paper is to develop a dynamic OD estimating model to overcome the limitation of depicting teal situations in dynamic simulation models based on static OD trip. To estimate dynamic OD matrix we used the hybrid discrete choice model(called the 'Demand Simulation Model'), which combines travel departure time with travel mode and travel path. Using this Demand Simulation Model, we deduced that the traveler chooses the departure time and mode simultaneously, and then choose his/her travel path over the given situation In this paper. we developed a hybrid simulation model by joining a demand simulation model and the supply simulation model (called LiCROSIM-P) which was Previously developed. We simulated the hybrid simulation model for dependent/independent networks which have two origins and one destination. The simulation results showed that AGtt(Average gap expected travel time and simulated travel time) did not converge, but average schedule delay gap converged to a stable state in transportation network consisted of multiple origins and destinations, multiple paths, freeways and some intersections controlled by signal. We present that the hybrid simulation model can estimate dynamic OD and analyze the effectiveness by changing the attributes or the traveler and networks. Thus, the hybrid simulation model can analyze the effectiveness that reflects changing departure times, travel modes and travel paths by demand management Policy, changing network facilities, traffic information supplies. and so on.

Induction Heating of Aluminum Alloys for Thixoforging (Thixoforging 공정을 위한 알루미늄 재료의 유도 가열)

  • 정홍규;강충길
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 1998.03a
    • /
    • pp.107-112
    • /
    • 1998
  • The semi-solid materials(SSMs) fabricated under electric-magnetic stirring condition are necessary to be applicated in the thixoforging process. The optimal reheating conditions to thixoforging process were investigated with changing the reheating time, holding time, reheating temperatures, capacity, and adiabatic material size. In the case of solid fraction fs=50%, the microstructure of SSM (specimen size:d76X 190) at the condition of the first reheating time 4min, holding time lrnin and reheating temperature 350%, the second reheating time 3min, holding time 3min and reheating temperature 575C, the thlrd reheating time lmin, holding time 2min and reheating temperature 584'C, capacity Q=8.398KW, and adiabatic material size 53mm is obtained with globular microstructure and finest.

  • PDF

Practical setup time implementation in the roll-based manufacturing practice having print operations (인쇄공정이 있는 Roll 기반 제조업에서의 실용적 Setup Time 적용 방안)

  • Bae, Jae-Ho;Wang, Gi-Nam
    • IE interfaces
    • /
    • v.22 no.1
    • /
    • pp.85-94
    • /
    • 2009
  • Nowadays, most of the major manufacturing companies prepare their manufacturing schedule using package based solutions. Even though the accuracy of the detail scheduling result is high at implementation, however, it is low during maintenance period. The main cause of low accuracy during maintenance period is due to difficulties in maintaining the accurate level of master data. In this paper, we propose to easily maintain setup time, which is one of the most important factors required in master data to achieve good scheduling result, after changing job. This paper is mainly focused on how to deduce the factors that influence the setup time in a roll-based manufacturing field with print operations. For this purpose, we employed rule based algorithm and applied for deciding setup time for the existing product items. Likewise, it can be applied to new items without any complex setup procedures, and, finally, it displays the result of the real setup-time and calculated setup-time.