• 공업화학
• /
• 제20권6호
• /
• pp.663-669
• /
• 2009

지구온난화에 가장 큰 영향을 미치는 이산화탄소를 연소 후 배가스로부터 흡착 분리하기 위한 허니컴 흡착소자의 제조 및 그 특성에 관한 것이다. 고온사용이 가능하도록 세라믹쉬트, 활성탄소 쉬트를 사용하여 허니컴을 제조하였고 그 위에 Na-X 제올라이트를 코팅하였다. 또한 Na-X 제올라이트를 포함시킨 제올라이트 쉬트를 사용하여 허니컴 흡착제를 제조하였다. 이들 세 가지 허니컴 흡착제에 대하여 이산화탄소 흡착량, 표면특성 그리고 16% 이산화탄소 혼합가스를 공급하여 파과특성을 분석하였다. 또한 가열재생에 따른 이산화탄소 농축특성과 가열시 허니컴 흡착제의 온도변화를 분석하여 열스윙 흡착 분리공정에서의 우월성을 비교 분석하였다. 이들 허니컴을 사용한 흡착파과실험 결과를 바탕으로 하여 회전식 흡착 농축공정의 적용 가능예를 보여주었다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.426-430
• /
• 2012

The properties of green sheet were investigated in order to understanding an effects of organic solvent mixture ratio for solid oxide fuel cells fabrication. The purpose of this work is to optimize the slurry condition using the design of experiment to improve green sheet properties. The elongation increased with increasing amount of binder and solvent. With increasing amount of solvent, the air permeability increased but the tensile strength decreased. The best properties of the green sheet appeared amount of the binder 17 wt%, solvent 35 wt% and powder 48 wt%. The optimum condition of green and sintered density for solid oxide fuel cells fabrication was obtained in the sample pressured at 800 $kgf/cm^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.182-182
• /
• 2009

The effect of Re-oxidation on the PTCR properties of Sm-doped barium titanate ceramics was investigated by means of impedance spectroscopy. Electrical properties such as resistance vs. temperature, I-V curve were measured and microstructure was observed with SEM photography. Sample was fabricated with thick film process such as tape casting of green sheet, screen printing of electrode pattern, stacking, firing in reduced atmosphere and re-oxidation, etc. As the temperature of re-oxidation increases, resistance jump as a function of temperature enhances but resistance at room temperature increases. These behavior of resistance as a function of temperature, dependent on the re-oxidation condition, is analyzed with Cole-Cole impedance plot and is shown to be related with the degree of oxidation of grain boundary regardless of grain core during re-oxidation process of sample.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.63-70
• /
• 2011

Anorthite forming glass frits in amounts up to 25 vol% of the silver powder were added to improve the adhesion between the conductor pattern formed by thick film photoimageable process and the low temperature co-fired ceramics (LTCC) substrate. The sheet resistance of the conductor pattern was raised from 0.13 ${\Omega}/{\square}$ to 2.25 ${\Omega}/{\square}$ as the volume percentage of glass frit increased up to 25 vol%. The adhesion strength was improved with this glass frit increase, but it decreased when the glass content exceeded 20 vol% which are possibly attributed to the liquid pool effect and the reduced fracture toughness in the interface between conductor and LTCC layer. The shrinkage of the width of the conductor pattern decreased with the addition of glass contents.

• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.548-553
• /
• 2007

Ceramic green sheets consisting Bi-based glass frit were fabricated for an application to PDP transparent dielectric front panel. The dispersion condition of the slurry for tape casting was pre-examined, and two kinds of hinder and plasticizer were used in the non-aqueous slurry system. In the fabrication process for the frit film, the properties such as dry and firing shrinkage, elongation, and transmittance were examined at the condition of various mixing ratio of plasticizers. In the mixing ratio of polyethylene glycol to dibutyl phthalate of 3:5wt%, a good adhesion, elongation and transmittance were observed at the firing temperature of $580^{\circ}C$. The photograph for the cross section of the interface was also showed a dense microstructure.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.490-496
• /
• 1999

The sintering behavior of LTCC (low temperature cofired ceramics) chip couplers was investigated in relation with Ag diffusion at the interface of glass ceramic substrate-Ag electrode. Sintering temperature was in the range of 825$^{\circ}C$-975$^{\circ}C$. The commercial green sheet and silver electrode were used. Below 875$^{\circ}C$ the diffusion of the Ag ion into the substrate and the penetration of glassy phases into the electrode occurred due to an increase of fluidity. Thus the lectrode line was severely deformed and damaged. At 975$^{\circ}C$ the transformation of crystalline phases into glassy phases and the melting of the Ag electrode resulted in the diffusion of the considerable amount of Ag ions.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.758-763
• /
• 2002

초음파 에너지(28 kHz, 40 kHz, 70 kHz)를 사용하여 수직자기기록용 Ba-ferrite의 자기적 특성 향상에 대하여 조사하였다. 한편, 분산된 Ba-ferrite를 sheet에 수직으로 배향시키기 위해 다양한 형태의 배향기들을 사용하여 실험을 행하였다. Ba-ferrite가 도포된 sheet 중 초음파 에너지가 40 kHz이고 초음파 처리 시간이 2시간에서 자기적 특성인 S. Q. (Squareness Ratio)와 O. R. (Orientation Ratio)값이 각각 0.7831과 2.87로 비교적 좋은 값을 얻을 수 있었다. 이때 얻어진 sheet의 표면 형상을 SEM(Scanning Electron Microscopy)으로 분석한 결과 Ba-ferrite가 자화용이축인 c 축에 수직방향으로 배향되어 수직자기기록용으로서의 응용에 가능성을 보였다. 또한, VSM(Vibrating Sample Magnetometer)으로 자기장의 각도변화에 따른 S. Q.의 측정시, 자기장의 각도가 증가함에 따라 S. Q. 값이 감소하였고 이는 수직자기기록용으로써 가능성을 재확인 시켜주었다.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1112-1117
• /
• 2006

The properties of LTCC green tape with addition of binder were investigated in order to understand an effects of binder on multilayer processing. A green sheet form was fabricated through tape casting method with the MLS-22 powder. The lamination density increased with increasing amount of binder and lamination pressure. With increasing amount of binder, the elongation of ceramic sheets increased but the tensile stress and air-permeability decreased. The addition of excessive binder is caused defects in the green sheet during via hole punching. The optimum condition of the via hole without defects was observed from amount of the binder 10 wt%.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.717-721
• /
• 2012

Manganese dioxide ($MnO_2$) is one of the most important cathode materials used in both aqueous and non-aqueous batteries. The $MnO_2$ polymorph that is used for lithium primary batteries is synthesized either by electrolytic (EMD-$MnO_2$) or chemical methods (CMD-$MnO_2$). Commonly, electrolytic manganese dioxide (EMD) is used as a cathode mixture material for dry-cell batteries, such as a alkaline batteries, zinc-carbon batteries, rechargeable alkaline batteries, etc. The characteristics of lithium/manganese-dioxide primary cells fabricated with EMD-$MnO_2$ powders as cathode were compared as a function of the parameters of a manufacturing process. The flexible primary cells were prepared with EMD-$MnO_2$, active carbon, and poly vinylidene fluoride (PVDF) binder (10 wt.%) coated on an Al foil substrate. A cathode sheet with micro-porous showed a higher discharge capacity than a cathode sheet compacted by a press process. As the amount of EMD-$MnO_2$ increased, the electrical conductivity decreased and the electrical capacity increased. The cell subjected to heat-treatment at $200^{\circ}C$ for 1 hr showed a high discharge capacity. The flexible primary cell made using the optimum conditions showed a capacity and an average voltage of 220 mAh/g and 2.8 V, respectively, at $437.5{\mu}A$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.208-208
• /
• 2008

Micro patterning of conductor line/space on LTCC green sheet in the LTCC module is an important process for miniaturization in 3D integrated circuits. This work presented the effect of inorganic binders on the microstructure, adhesion, electrical resistivity, shrinkage and line/space resolution, which is a part of study in photoimageable conductor paste. The photoimageable conductor paste contains silver powder, polymer binder, monomer, photo-initiator, UV absorber, and solvent. The inorganic binders were furnished with varied weight percentage of anorthite, diopside and MLS-62 glass frits from 0% to 7%. The Line/space sizes thus obtained was under 25 micron.