• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.95-115
• /
• 1996

The esthetic factor for the esthetic prosthesis were studied on 300 persons. The praaticipants were 150 students registered under the Deparment of Dental Laboratoy Technology, Jisan Junior College at the present day of June, 1995 and their mothers. The results were as follows; 1. The number of persons with 28 teeth in their oralcatity was highest(P<0.01). They complained that they have only 28 teeth bacaues of the loss(deficiency) fo teeth due to their impacted teeth and dental caries. 2. The presons with feelings of dissatisfaction were large in number(P<0.01). They were dissatisfied with an abnormal tooth form(33.5%), tooth position(31.7%), tooth color(31.1%), and tooth size(3.7%) in order(P<0.01). 3. In their facial form, the most numerous were men with square form and women with ovoid form(P<0.01). Among the whloe number fo facial forms it appeared to decresae in the order of ovoied(41.8%), square(32.7%), square+tapered(20.5%), and tapered form(5%)(P<0.01). In a profile form, the most numerous were men with A form and women with B. Among the whole participants the most numerous were persons with B form and persons with A and C form were next in oder of numbers(P<0.01). 4. In discoloration of teeth, the most numerous were persons who have no discoloration. 5. In the esthetic recovery of anterior prosthesis the color matching of proximal teeth was not correct, but the outline of proximal teeth was to be reproduced correctly. 6. In the diastema of teeth, the number of persons who have no diastema was higher than that of persons who have a disatema(P<0.01) Among the persons who have diastema the most numerous were persons who have a diastema, and next were 2, 4, 3 and 5 diastemas in order. 7. In a meeting point of the midline of the body and the tooth the number of person hanving a meeting point was higher than that of persons who did not fit each other(P<0.01). The bias direction of midline teeth appeared to be affected by chewing direction, prosthesis location, and posterior location. 8. The length and width of teeth in the tooth size were suitable(P<0.01). The number of persons who have central teeth longer than lateral teeth was high(P<0.0). 9. In the results of smile analysis, the line form connected with incisal edge of upper canine were parallel(P<0.01). When smile the location fo upper lips should be in accord with the central area of teeth(P<0.01) and lower lip should be atteched to the edge of anterior teeth in order to be esthetic. 10. Among the number of upper teeth we can see the most numerous were 8 teeth and next were 10, 6 and 12 in order.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.81-97
• /
• 1987

Two nozzles with different size (Figure 2) were particularly designed to supply air through the swirl core into the central part of the liquid stream in the same parallel direction to produce a well-mixed air and water in the whirl chamber as spray liquid in bubble formation. Atomization was attempted to improve by using both the preliminary break-up process with less viscosity and less surface tension in the whirl chamber and the effects of increased frequency of the band of drops with the raised ambient air density in front of the nozzle orifice. The volumetric ratio between spray liquid and air on four levels was used to investigate the effects of air as a component of the mixture on atomization. The results of the experiment were summarized as follows; Droplet size became progressively finer as the operating pressure was increased in the range of $0.70kg/cm^2$ to $6.33kg/cm^2$, which was similar to the previous works. The new atomizing mechanism so-called 'air-center nozzle' gave a narrower range in droplet size distribution with smaller volumetric median diameter (VMD) than that of the existing spray system at a given pressure, which showed the possibility of improvement of atomization in a certain limit. The volumetric median diameter produced by the new atomizing mechanism was decreased from the central region toward the exterior edges across the spray pattern.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.265-288
• /
• 2020

Public sports facilities, which have increased in number due to continued government attention and investment, are used by a large number of residents in the province. However, the safety management in some facilities is limited due to being carried out with reference to safety management standard manuals as a mere formality. The purpose of this study was to analyze the current safety management status of public sports facilities in Gangwon and to seek out a policy direction that can be used safely by provincial residents. To this end. the study made a comprehensive review of central government and Gangwon government policy trends in sports facility safety management in Gangwon along with actual cases, from which it made the following suggestions for policy directions. First, it proposed the designation and operation of specialized institutions using locally established development and municipal companeie,. universities and cooperatives. and the training and fostering of safety managers for sports facilities. Secod, it proposed the establishment of a foundation to promote a sport facility safety culture such as designation of and commendation for excellent facility safety management on the provincial level. holding case presentations on safety and responsiveness. sports safety experience plazas, sports safety classes, and cartoons for public relations. Third, it proposed setting the foundation for a safety management system that takes into account the greater quantity of leisure sports facilities compared to other cities and provinces. Fourth, it proposed the establishment of an institutional basis to establish support ordinance for sports facility safety management that meets the local conditions in Gangwon. Fifth, it proposed safety management measures for sports facilities at the central government level in parallel with a basic plan for sports facility safety management tailored to Gangwon that matches the conditions on the ground in the region.

• The Korean Journal of Coaching Psychology
• /
• v.5 no.2
• /
• pp.25-51
• /
• 2021

The purpose of this study is to deeply explore the communication process with team members perceived by team leader. To this end, in-depth interviews were conducted with 10 team leaders, and analyzed according to the grounded theory research method procedure suggested by Strauss and Corbin. As a results, a total of 51 concepts, 17 subcategories, and 8 categories were derived. As a causal condition, the concept of 'contemplating and reinterpreting communication necessary for the organization' was derived, and the central phenomenon was 'intentional effort made in parallel with work and private conversations'. The contextual condition was 'recognizing the need to cope with environmental changes', and the mediating condition was 'self-reflection and self-coaching time' was derived. The action/interaction strategy was conceptualized as a communication process with task-oriented coping, conflict resolution coping, and relationship promotion coping, and was confirmed as 'recognizing virtuous cycle communication within the organization' as a result of interaction with the central phenomenon. As a result of analysis of the team leader's communication process, the effort stage, approach stage, coping stage, and cycle stage were shown. As a result of the type analysis, task-oriented coping was a facilitator, conflict resolution coping was a supporter, and relationship promotion coping was a considerate. This study is an empirical study on how the corporate team leader perceives and expresses communication in the relationship with the team members.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.41-50
• /
• 2000

Objectives : Acupuncture is expected to have somewhat like the efficacy parallel increasing activity of immune system in Western modem medicine. There, already, are many animal researches on activating effect of acupuncture for the immune system in peripheral organs. So, we carried out this experiment to see whether acupuncture has controlling effect on interleukin-6(IL-6) activity in rat's brain. Methods and Results : We had topical application of IL-6(1U=lpg, $10{\mu}l$) on brain of rat. It reduced afferent sensory transmission to the primary somatosensory(SI) cortex from periphery. Whereas, electrical stimulation(ES, 2Hz, 1.5V, 15min) of ST36(足三里) with application of IL-6 prominently activated afferent sensory transmission. ES of non-acupoint(proximal tail) with IL-6 showed suppression of afferent transmission. ES of ST36 without IL-6 application also exerted facilitation of afferent transmission to the SI cortex. Conclusions : Electoacupuncture(EA) on ST36 has noticeable influences on modulating activation of IL-6 in central nervous system, which do major role in immune system.

• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.391-395
• /
• 2005

The title complex, $[Cd(N_3)_2(2-ethylimidazole)_2]$, I, has been prepared and characterized by X-ray single crystallography. The complex I crystallizes in the monoclinic system, Cc space group with a = 16.200(3), b = 12.926(3), $c=7.007(1){\AA}$, ${\beta}=102.29(3)^{\circ}$, $V=1433.7(5){\AA}^3$, Z = 4, $R_1=0.0239$ and ${\omega}R_2=0.0604$ for 1874 independent reflections. Cd(II) atom has a slightly distorted octahedral coordination geometry, with four end-on (${\mu}-1$,1) bridging azido ligands and two 2-ethylimidazole ligands bonding through nitrogen atom. The central cadmium(II) atoms are run in parallel to the c-axis and are doubly bridged with neighboring cadmium(II) atoms by the end-on (${\mu}-1$,1) bridging azido ligands. Thus, this complex has a one-dimensional zigzag chain structure in which the 2-ethylimidazole is in the cis conformation.

• Journal of the Korean Society of Costume
• /
• v.58 no.10
• /
• pp.78-94
• /
• 2008

Contemporary fashion is experiencing a rise in design that combines heterogeneous things, or goes beyond the roles, boundaries, and meanings of existing things. This can be described as a 'heterogeneous fusion' that is different in character from the mixed use of heterogeneous materials, borrowed designs, and exaggeration of the silhouette that have been practices in fashion design, or the non-structure, deconstruction, and recombination that have existed since the age when post-structuralism was a central philosophy. This 'fusion' causes a 'confusion' of the generally accepted mental principle of 'one sense reacting to one stimulus', and breaks the boundary between the various senses, causing confusion in the senses of the individual, and leading him or her to experience unfamiliar feelings. In this process, all information received from external sources is not perceived as it is seen, but rather is perceived through a fusion of the individual's motivations, the environment in which it is perceived, the resulting change in emotion, and the individual's past memories. The combination of these heterogeneous elements visually accepted, or such a non-territorial combination acts as a 'fusion of senses' in the individual's perception, which causes confusion in the homeostasis of perception, and a change in emotion, and serves as a factor that causes the information to be stored in the memory for a long time. In parallel with deconstruction or non-structure, the 'heterogeneous fusion' found in modern fashion is taking root as a representative creative trend, and is represented in various forms such as the mixed use of subjects and materials, non-territorial borrowing, fusion with animal forms, fusion with non-physical geometry, and fusion with heterogeneous hair decoration.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.258-266
• /
• 2018

Objective : The diagnosis of insufficiency fractures of the sacrum in an elder population increases annually. Fractures show very different morphology. We aimed to classify sacral insufficiency fractures according to the position of cortical break and possible need for intervention. Methods : Between January 1, 2008 and December 31, 2014, all patients with a proven fracture of the sacrum following a low-energy or an even unnoticed trauma were prospectively registered : 117 females and 13 males. All patients had a computer tomography of the pelvic ring, two patients had a magnetic resonance imaging additionally : localization and involvement of the fracture lines into the sacroiliac joint, neural foramina or the spinal canal were identified. Results : Patients were aged between 46 and 98 years (mean, 79.8 years). Seventy-seven patients had an unilateral fracture of the sacral ala, 41 bilateral ala fractures and 12 patients showed a fracture of the sacral corpus : a total of 171 fractures were analyzed. The first group A included fractures of the sacral ala which were assessed to have no or less mechanical importance (n=53) : fractures with no cortical disruption ("bone bruise") (A1; n=2), cortical deformation of the anterior cortical bone (A2; n=4), and fracture of the anterolateral rim of ala (A3; n=47). Complete fractures of the sacral ala (B; n=106) : parallel to the sacroiliac joint (B1; n=63), into the sacroiliac joint (B2; n=19), and involvement of the sacral foramina respectively the spinal canal (B3; n=24). Central fractures involving the sacral corpus (C; n=12) : fracture limited to the corpus or finishing into one ala (C1; n=3), unidirectional including the neural foramina or the spinal canal or both (C2; n=2), and horizontal fractures of the corpus with bilateral sagittal completion (C3; n=8). Sixty-eight fractures proceeded into the sacroiliac joint, 34 fractures showed an injury of foramina or canal. Conclusion : The new classification allowes the differentiation of fractures of less mechanical importance and a risk assessment for possible polymethyl methacrylate leaks during sacroplasty in the direction of the neurological structures. In addition, identification of instable fractures in need for laminectomy and surgical stabilization is possible.

• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.81-91
• /
• 1999

The area of the study is located in Ogcheon district, middle part of Ogcheon Fold Belt. The area is covered by metasedimentary rocks of Ogcheon Supergroup at northern, eastern and southern part. Jurassic Ogcheon granite which intruded into Ogcheon Supergroup at central part, was intruded by Cretaceous quartz porphyry at western part. The granite consists of quartz, plagioclase, alkali feldspar, biotite, sphene, apatite, epidote, opaque and so on. It is generally characterized by grey to light grey, medium-grained, mafic enclave and partly weak foliation. In terms of geochmical compositions, the granite is felsic, peraluminous, subalkaline and calc-alkaline, and it was differentiated from single granitic magma. It shows parallel LREE enrichment and HREE depletion patterns with 0.84 Eu negative anomaly, which has REE variation trend and anomaly value similar to Jurassic granites in Korea. From charactristics of petrology, mineralogy and geochmistry, it may be interpreted that the Ogcheon granite body was derived from melting of I-type crustal material related to syn-collisional tectonic setting and emplaced more or less rapidly into the Ogcheon Supergroup.