• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).

• Journal of Trauma and Injury
• /
• v.33 no.2
• /
• pp.134-137
• /
• 2020

Here we present a 43-year-old man who was brought with a self-inflicted cut throat injury; 18 hours after the suicidal attempt. On examination a deep 12 cm cut at the level of the hyoid bone exposing the posterior pharyngeal wall was seen. Emergency surgery with primary repair, tracheostomy and feeding gastrostomy was done. Post-operative period was uneventful and patient recovered without any speech or swallowing abnormalities. Through this article we would like to stress that even in cases of frightening ghastly wounds, by maintaining simple surgical principles we can achieve good outcomes.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.255-261
• /
• 2001

This study was related with the effect of elevated temperature on the tensile strength of edge-cut samples. There was a different tensile strength behavior of uncut samples and pre-cut samples under different test temperatures. Tensile strength of uncut sample decreases with increasing test temperature. When pro-cut size(C) is larger than critical cut size($C_{cr}$), tensile strength or pre-cut specimen at $80^{\circ}C$ is higher than that of pre-cut specimen at room temperature (RT). Test specimens under $80^{\circ}C$ condition exhibited more secondary cracks at the crack tip region compared to room temperature conditions. However, secondary cracks of pre-cut specimens are not clearly developed at $110^{\circ}C$. Differences in tensile strength induced by different test temperature seem to be responsible for the strain-induced crystallization and micro-cracking patterns.

• Steel and Composite Structures
• /
• v.22 no.3
• /
• pp.691-712
• /
• 2016

In this editorial, buckling analytical investigation of the nanocomposite plate with square cut out reinforced by carbon nanotubes (CNTs) surrounded by Pasternak foundation is considered. The plate is presumed has square cut out in center and resting on Pasternak foundation. CNTs are used as amplifier in plate for diverse distribution, such as uniform distribution (UD) and three patterns of functionally graded (FG) distribution types of CNTs (FG-X, FG-A and FG-O). Moreover, the effective mechanical properties of nanocomposite plate are calculated from the rule of mixture. Domain decomposition method and orthogonal polynomials are applied in order to define the shape function of nanocomposite plate with square cut out. Finally, Rayleigh-Ritz energy method is used to obtain critical buckling load of system. A detailed parametric study is conducted to explicit the effects of the dimensions of plate, length of square cut out, different distribution of CNTs, elastic medium and volume fraction of CNTs. It is found from results that increase the dimensions of plate and length of square cut out have negative impact on buckling behavior of system but considering CNTs in plate has positive influence.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.30 no.1
• /
• pp.28-33
• /
• 2019

Background and Objectives : Laryngeal electromyography (LEMG) is valuable to evaluate the innervation status of the laryngeal muscles and the prognosis of vocal fold paralysis (VFP). However, there is a lack of agreement on quantitative interpretation of LEMG. The aim of this study is to measure the motor unit action potentials (MUAP) quantitatively in order to find cut-off values of amplitude, duration, phase for unilateral vocal fold paralysis patients. Materials and Method : Retrospective chart review was performed for the unilateral VFP patients who underwent LEMG from March 2016 to May 2018. Patient's demography, cause of VFP, vocal cord mobility, and LEMG finding were analyzed. The difference between normal and paralyzed vocal folds and cut-off values of duration, amplitude, and phase in MUAP were evaluated. Results : Thirty-six patients were enrolled in this study. Paralyzed vocal fold had significantly longer duration (p=0.021), lower amplitude (p=0.000), and smaller phase (p=0.012) than the normal. The cut-off values of duration, amplitude, and phase in MUAP for unilateral VFP were 5.15 ms, $68.35{\mu}V$, and 1.85 respectively. Conclusion : An analysis of MUAP successfully provided quantitative differences between normal and paralyzed vocal folds. But, additional research is needed to get more available cut-off value which is helpful to evaluate the status of laryngeal innervations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.45-54
• /
• 2013

In this paper, a theoretical weight-reduction method was suggested to substitute an underframe material of a box-type bodyshell having cut-outs with an alternative light-weight material. To utilize the material substitution method previously developed for a box-type hybrid bodyshell not having cut-outs, we derived a box-type baseline model without cut-outs which is similar to the stiffness condition of a box-type bodyshell having cut-outs. To do this, the thicknesses of roof and walls of the baseline model were determined such that the deflection of the baseline model under a distributed vertical load condition is equal to the sum of the theoretical section deflections of the original box model with cut-outs. Next, to derive a hybrid bodyshell by under-frame material substitution, the material substitution method for a box-type hybrid bodyshell without cut-outs was applied to the box-type baseline model. Finally, we compared the FE simulation results of the derived hybrid bodyshells having cut-outs for various materials with the theoretical results of the suggested method, and we obtained their good correlations.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.363-369
• /
• 2015

Background : Platycodon grandiflorum radix used as a therapeutic agent for lung and respiratory diseases in traditional Korean medicine. The saponin and sugar content in P. grandiflorum root is dependent on the drying temperature and method. In this study, we investigated saponins and antioxidant contents in dried P. grandiflorum roots either not cut or cut to different lengths. Methods and Results : P. grandiflorum roots were either cut to 0.5, 1.0 or 2.0 cm in length or left uncut. They were dried at $45^{\circ}C$ and the effect of antioxidant substances, antioxidant ability, and saponin content were investigated. P. grandiflorum roots rapidly dried out when cut to short lengths. The saponin contents (platycodin D, polygalacin D, and deapioplatycodin D) was highest in the uncut P. grandiflorum roots. When the cut lengths were long, the levels of polyphenolic compound increased. However, 2,2'-azinobis-3-ethylbenzo-thiazoline-6-sulfonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities were higher in the samples cut to shorter lengths. Conclusions : These results suggested that the saponin and antioxidant content of P. grandiflorum roots could be maximized by controlling the drying rate of the roots via adjustments to the root cutting length.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.99-104
• /
• 2003

While demands for express service are rapidly increasing according to recent progress of electronic commerce, express service companies are struggling to take a larger delivery service market share through ongoing improvement in their service processes. Extension of cut-off time for express service centers can provide the express company with increase of total sales, but it may also cause to increase the possibility not to satisfy customer needs due to work delay in the consolidation terminal. Therefore, compromised decision for cut-off time of each service center should be made by taking operation characteristics of the consolidation terminal into account. This study suggests an approach for determining the cut-off time for express service centers according to operational characteristics of the consolidation terminal with the objective of maximizing expected incremental sales. The problem defined in this study can be represented as two successive models; one is an integer programing model in which the best cut-off time for each sales center are determined, and the other is a single machine scheduling model in which a working schedule in the consolidation terminal is obtained. A genetic algorithm is developed to solve the two models simultaneously. Finally, an example problem is carried out to verify applicability and performance of the algorithm with the data set collected from an express company.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.172-175
• /
• 2004

This paper analyzes the effects of Ge profiles shape of SiGe heterojunction bipolar transistors (HBT's) for high frequency application. Device simulations using ATLAS/BLAZE for the SiGe HBT with trapezoidal or triangular Ge profile are carried out to optimize the device performance. An HBT with $15\%$ triangular Ge profile shows higher cut-off frequency and DC current gain than that with $19\%$ trapezoidal Ge profile. The cut-off frequency and DC gain are increased from 42GHz to 84GHz and from 200 to 600, respectively. The SiGe HBT has been fabricated using a production CVD reactor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.7
• /
• pp.563-572
• /
• 2013

Based on this paper, in case of the on-line account system in finance industry temporarily stops working because of the on-line data change from 00:00 to 00:30, it conducts in extra placement server and the director update is carried out via center cut or on-line server to make the service possible through customer director reproduction revision. So, from the simulation result in financial operating system, We retain the batch director & backup director securely about the important time data in each account classes on-line director without even one second interruption.