Browse > Article
http://dx.doi.org/10.7473/EC.2019.54.2.91

A Study on the Physical Properties of Heat resistance and Cut resistance of Coating Gloves for Work  

Pyo, Kyeong-Deok (R&D Center Dongrim New Material)
Jung, Eugene (Division of Energy & Bio Engineering Dongseo University)
Park, Cha-Cheol (Division of Energy & Bio Engineering Dongseo University)
Publication Information
Elastomers and Composites / v.54, no.2, 2019 , pp. 91-96 More about this Journal
Abstract
The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).
Keywords
gloves; coating; heat resistance; cut resistance; NBR foam; latex;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 J. I. Hwang and M. J. Suh, "Adverse Reaction to Surgical Latex Gloves", The Korean Academic Society of Adult Nursing, 9, 199 (1997).
2 S. K. Kim, K. S. Kim, and S. H. Cho, "Preparation and Properties of Insulating Rubber Gloves for Safety Protection", Elastomers Composite, 36, 262 (2001).
3 H. A. Kim, H. W. Jang, K. Heo, S. J. Kim, and S. J. Kwon, "The Physical Property of Nylon/PP Warm-up Knitted Fabric for High Emotional Garment", Textile Coloration and Finishing, 26, 22 (2014).   DOI
4 Y. W. Kim, "A Study on Defects Due to Air Bubbles in the PU-Coating Gloves and Enhanced Molds to Reduce the Defects", The Korean Society of Manufacturing Technology Engineers, 16, 55 (2007).
5 L. H. Choi, M. R. Park, H. Y. Ma, Y. H. Kang, and S. J. Kim, "Physical Property of Aramid ATY filament According to the ATY Nozzle Diameter", The Korean Society of Dyers and Finishers, 46, 65 (2012).
6 S. R. Choi, T. W. Son, and D. H. Jang, "Preparation of High Modulus Aramid Fiber", Journal of the Korean Fiber Society, 34, 868 (1997).
7 Y. G. Jung and B. G. Min, "High Performance Polyarylate Fiber", Fiber Technology Industry, 15, 22 (2011).
8 D. W. Kang, H. J. Kang, H. S. Jung, and Y. M. Lee, "Solid State Interfacial Phenomena of High Performance Two Phase Polymer System", The Korean Society of Industrial and Engineering Chemistry, 8, 49 (1997).
9 H. S. Lee, Y. Kim, W. N. Kim, J. C. Hyun, and T. S. Oh, "Properties of Blends a Thermotropic Liquid Crystalline Polymer with Polyphenylene Sulfide", The Korean Journal of Rheology, 6, 96 (1994).
10 H. U. Lee, J. H. Lim, and You. Huh, "Influence of Basalt Composition on the Tensile Properties of Basalt Fibers", Textile Science and Engineering, 48, 214 (2011).
11 B. K. Park, "Glass fiber", Journal of the Korean Fiber Society, 2, 203 (1990).
12 J. H. Byun, S. K. Lee, M. K. Um, T. W. Kim, and S. W. Bae, "Characterization and Prediction of Elastic Constants of Twisted Yarn Composites", Journal of the Korean Society for Composite Materials, 15, 30 (2002).
13 J. K. Lee and J. S. Kwon, "Effect of Fire Fighters Turnout Gear Materials Air Gap on Thermal Protective Performance", Korean Institute of Fire Science & Engineering, 28, 97 (2014).   DOI
14 G. Y. Han, D. H. Song, and D. G. Ahn, "Electromagnetic Interference Shielding Effect of Fiber Reinforced Composites with Stainless Fiber Conductive Filler", Journal of the Korean Society of Precision Engineering, 27, 71 (2010).
15 K. G. Park, S. K. Yoon, and K. W. Han, "Test on the Tearing Strength of Polyester Membrane Material", Proceedings of KASS Symposium, 4, 85 (2007).
16 Y. S. Cho and D. H. Cho, "Effect of Kenaf Fiber Loading on the Properties of Natural Fiber/Natural Rubber Composites", Elastomers Composite, 46, 186 (2011).
17 K. G. Park and S. K. Yun, "Tearing Strength Test of Architectural Membrane", Korean Association for Spatial Structures, 28, 5 (2007).
18 Y. K. Song, Y. M. Baek, S. H. Jeon, E. J. Sung, B. Y. Chang, and S. K. An, "Mechanical and Comfort Properties of Recycling Aramid and Cotton Blended Fabric for Flame Retardant Work Clothes", Textile Science and Engineering, 54, 429 (2017).   DOI
19 M. K. Joo, "Meaning of cut resistance Gloves and EN388", Fiber Technology and Industry, 18, 255 (2012).