• 제목/요약/키워드: center pin

검색결과 320건 처리시간 0.038초

탭 선로의 새로운 등가 회로를 이용한 헤어핀 대역 통과 필터 설계 (Design of Hair-Pin Band-Pass Filter Using New Equivalent Circuit of Tapped-Line)

  • 윤태순;권성수;홍태의;이종철
    • 한국전자파학회논문지
    • /
    • 제17권12호
    • /
    • pp.1150-1155
    • /
    • 2006
  • 본 논문에서는 대역 통과 필터의 입력부에 응용되는 탭 선로의 등가 회로를 제시하였고, 그 변수 값을 수식적으로 제시한다. 탭 선로의 등가 회로는 개방형 스터브와 음의 전기적 길이를 갖는 전송 선로로 구현하며, 탭 선로의 위치와 공진기 길이는 공진기의 임피던스와 인버터 값으로 구할 수 있다. 이러한 새로운 등가 회로에 의한 설계는 기존의 방법에 비해 이론적으로 근접한 결과를 얻을 수 있게 한다. 새로운 탭 선로의 등가 회로를 이용한 헤어핀 대역 통과 필터는 중심 주파수 2 GHz에서 1.1 dB의 삽입 손실과 20 dB의 반사 손실 특성을 나타낸다.

브레이드 복합재료의 원공의 크기와 분포가 재료강도에 미치는 영향 (The Effect of Circulat Hole Size and Distribution on Strength of Braided Composite)

  • 이경우;강태진
    • 한국재료학회지
    • /
    • 제4권3호
    • /
    • pp.253-258
    • /
    • 1994
  • S2-유리 섬유/폴리에스터 브레이드 복합재료에서 원공의 크기 및 원공간 거리 변화가 인장성질, 핀하중 인장성질, 굽힘성질에 미치는 영향을 연구하였다. 원공의 크기에 따른 복합재료의 인장강도의 저하는 Whitney와 Nuismer에 의해 제시된 이론값과 대체로 일치함을 보여주었으며 이때의 특성길이($d_o$)는 브레이드 복합재료는 약 1.6mm, 직물 적층 복합재료는 약 1.8mm가 되었다. 브레이드 복합재료의 원공간 거리 변화에 따른 인장강도의 변화는 두 원공 중심 사이의 거리가 원공 지름의 4배 이상이면 원공간 상호작용이 없었다. 원공의 중심과 측면간 거리에 따른 인장강도의 변화는 원공의중심과 측면간 거리가 원공 지름의 3배 이상일 때 상호작용이 없었다. 핀하중 인장실험에서 브레이드 복합재료와 직물 적층 복합재료 모두 핀의 지름이 증가함에 따라 Bearing Stength는 감소하였다.

  • PDF

Disk-Loaded 다이폴과 Folded 다이폴로 동작하는 Reconfigurable 안테나 (A Reconfigurable Antenna for Alternative Operation between Disk-Loaded Dipole and Folded Dipole)

  • 박슬기;정근석;추호성;오이석
    • 한국전자파학회논문지
    • /
    • 제18권12호
    • /
    • pp.1327-1336
    • /
    • 2007
  • 본 논문에서는 PIN 다이오드를 사용하여 disk-loaded 다이폴 안테나와 folded 다이폴 안테나로 형상이 변화하는 새로운 구조의 소형 안테나를 개발하였다. 개발된 안테나는 PIN 다이오드의 RF on/off 특성을 이용하여 안테나의 전기적 길이를 변화시켜 이중 대역에서 동작하며, 저주파 대역에서는 높은 복사 저항 값을 가지는 folded 다이폴 안테나로 동작하고 고주파 대역에서는 수평 방향으로 무지향성의 복사 패턴과 수직 방향으로 도넛 형태의 복사 패턴을 가지는 disk-loaded 다이폴 안테나로 동작한다. 제안된 안테나는 $20{\sim}300$ MHz에서 30cm 다이폴 안테나에 비해 크기가 소형화 되었음에도 높은 이득을 가진다. 또한, $300{\sim}1,300$ MHz에서 $80^{\circ}$ 이상의 넓은 빔 폭을 가짐으로써 방향 탐지 안테나로 사용이 가능하다.

PIN 다이오드를 이용한 초고주파 4-비트 위상기에 관한 연구 (A Study on the 4-bit Microwave Phase Shiftter with PIN Diode)

  • 조영송;권혁중;이영철;신철재
    • 대한전자공학회논문지
    • /
    • 제27권2호
    • /
    • pp.47-54
    • /
    • 1990
  • PIN 다이오드를 사용하여 부하선로 방식 위상기와 가변회로 방식 위상기의 설계방법을 제안하였다. 부하선로 방식은 어느 정도 간격을 두고 두개의 서셉턴스를 병렬로 접속하여 구성하고 스위칭 소자의 바이어스에 따른 서셉턴스값의 변화에서 위상차를 얻으므로서 작은 위상변화를 간단한 구성으로 얻었다. 가변회로 방식은 캐패시터와 인덕터로 병렬 T회로를 구성하고 스위칭 소자의 바이어스에 따른 회로의 기본 구성이 바뀌어지는 방식으로, 저역통과 상태와 고역통과 상태를 유출하여 큰 위상차를 얻었다. 중심 주파수 6GHz에서 대부분의 설계사항은 컴퓨터 시뮬레이션에 의하여 최적화 시켰다. 또한 마이크로스트립 선로의 비유전율 2.94인 기판에 Owen 식을 이용하여 계산하였다. 측정치는 평균 위상 오차 $10^{\circ}$ 미만으로 이론치와 거의 같음을 알 수 있었다.

  • PDF

『한한대사전(漢韓大辭典)』에 보이는 『금병매사화(金瓶梅詞話)』 관련 어휘 오류연구(誤謬硏究) (A Study of Error Correction in Words Used in Chinese Novel Kam Pin Mui Presented in the Great Chinese-Korean Dictionary)

  • 최태훈
    • 비교문화연구
    • /
    • 제29권
    • /
    • pp.287-314
    • /
    • 2012
  • This article examines the problems with some words used in "Chinese novel Kam Pin Mui"that are presented in"the Great Chinese-Korean dictionary". The author analyses the problems into three aspects: first, error correction in meaning interpretation; second, supplementary correction in meaning interpretation; and third, additional error correction. The main points of the study are presented in the following. First, in relation to the error correction in meaning interpretation, this study finds out that the explanations of "Liezi", "daxuanmo", "kedui", "shaojian" in the "Great Chinese-Korean dictionary"are incorrect. The cases involve the explanations that have no foundation, do not get to the points, and have narrow meaning interpretations compared with original meanings. Second, as for the supplementary correction, this study points out that the explanations of "yiri", "jiaosa", "buxi", "langhu" are not sufficient. Thus, this study claims that the following meanings for each case should be added, including "long time," "abdominal pains during pregnancy," "a type of folk performing arts without stages in local areas of China, and "to devour in greedy gulps." Third, with respect to the additional error correction, this study analyses "the typos of the examples," "the setup of inaccurate meaning items," "the front-to-back arrangement of the examples," and "inconsistency between meaning interpretations and examples" displayed in the dictionary. The error correction in the dictionary can be possible only if the findings from several other disciplines should be incorporated, involving cultural history, the history of literature, philology, grammatology, linguistics, etc. It seems impossible for a person to solve all the problems with the errors in the dictionary. Thus, it will be greatly helpful to the author and the people who prepare for the new edition of "the Great Chinese-Korean dictionary" if we can get continuous supports and comments from relating scholars of other disciplines. As a result, all these efforts will contribute to the academic progress for the relevant disciplines and these academic activities may develop a new area of the study.

렌즈에 의해 왜곡된 원영상의 교정 (Circle calibration distorted by camera lense)

  • 최춘호;문철홍
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.721-724
    • /
    • 1998
  • A circular image in a space don't appear as an exact circular image and appear as an oval in image buffer because distortion of camera lens, number of horizontal pixel of CCD photographing element and unmber of horizontal pixel of image buffer are not in accordance. By using familiar 3-D coordinate, know as circle's diameter, and cicle's center, you correct a pin-hole camera and get an exact circle with reprojection a circle into image buffer, according to a perspective.

  • PDF

IC Interposer Technology Trends

  • Min, Byoung-Youl
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 International Symposium
    • /
    • pp.3-17
    • /
    • 2003
  • .Package Trend -> Memory : Lighter, Thinner, Smaller & High Density => SiP, 3D Stack -> MPU : High Pin Counts & Multi-functional => FCBGA .Interposer Trend -> Via - Unfilled Via => Filled Via - Staggered Via => Stacked Via -> Emergence of All-layer Build-up Processes -> Interposer Material Requirement => Low CTE, Low $D_{k}$, Low $D_{f}$, Halogen-free .New Technology Concept -> Embedded Passives, Imprint, MLTS, BBUL etc.

  • PDF

영구자석을 이용한 지오메트리 피그용 갤리퍼 시스템의 검출감도 향상에 관한 연구 (Study on the Sensitive Detection in Geometry PIG Caliper System using Permanent Magnet)

  • 박상호;박관수;조성호;유휘룡;노용우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.886-888
    • /
    • 2001
  • 배관의 덴트 및 주름의 형태 크기와 위치, buckle의 여부와 위치, 배관의 난형도 및 곡률을 파악하기 위해서 사용되는 Gemometry PIG의 캘리퍼 시스템에 Mechanical Finger를 back-yoke의 유무, 영구자석의 크기, Pin Hole의 위치와 영구자석의 위치 등을 3차원 비선형 유한요소법으로 해석한 후 이를 바탕으로 최적설계를 하여 이를 실제 제작하여 측정치와 비교하였다.

  • PDF

Al계 준결정 분말의 제조 및 응용

  • Kim, W. T.;Kim, D.H.;Lee, S.M.;E.Fleury;H.S. Ahn
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2002년도 제3회 최신 분말제품 응용기술 Workshop
    • /
    • pp.133-155
    • /
    • 2002
  • 1. Quasicrystalline powders shows exotic physical and mechanical p properties 2. Applications: structural application: strengthening particles for composites C Coating application: wear resistance, low friction coefficient 3. For thermal spaying: material loss during process should be c considered to control chemical composition of deposit 4. Friction coefficient is strongly dependent on contact geometry F Friction coefficient from pin on plate: 0.1-0.2 Friction coe야icient from flat on plate: about 0.46. 5. Quasicrystalline materials show lower friction coefficient but higher w wear rate than corresponding values of $Cr_20_3$ coated layer. 6. Amorphous coating seems to be promising

  • PDF