• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.94-103
• /
• 2007

The transition of interconnection metal from aluminum alloy to copper has been introduced to meet the requirements of high speed, ultra-large scale integration, and high reliability of the semiconductor device. Since copper, which has low electrical resistivity and high resistance to degradation, has different electrical and material characteristics compared to aluminum alloy, new related materials and processes are needed to successfully fabricate the copper interconnection. In this review, some important factors of multilevel copper damascene process have been surveyed such as diffusion barrier, seed layer, organic additives for bottom-up electro/electroless deposition, chemical mechanical polishing, and capping layer to introduce the related issues and recent research trends on them.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.226-235
• /
• 2002

This experiment was to evaluate lodging characteristics of 35 recommended rice varieties of Kyonggi-do at normal (110 kg N/ha) and hen (220 kg N/ha) nitrogen application rates during 1999 to 2000. At heavy N fertilization rate, varieties that were highly resistant to lodging were Obongbyeo, Daejinbyeo, Naepoongbyeo, Nonganbyeo and Ilpumbyeo. Fourteen varieties including Daeanbyeo were moderately resistant and 11 varieties including Jinbubyeo were susceptible to lodging. The lodging-related characters which showed the highest effect on lodging at lodging degree of 9 were culm length and height of center gravity, culm length at lodging degree of 5, and culm length and the third internode length at lodging degree of 3 or below. The difference in rice yield between normal and heavy nitrogen fertilization rate was within 5% in early-maturing varieties but there was great yield difference in mid- and late-maturing varieties depending on the degree of lodging. Consequently, stable rice yield could be obtained by selecting lodging-resistant varieties and lowering fertilization rate, specially in the paddy field where lodging occurrence is common.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.303-314
• /
• 2018

Shear walls are a typical member under a complex stress state and have complicated mechanical properties and failure modes. The separated-elements model Genetic Evolutionary Structural Optimization (GESO), which is a combination of an elastic-plastic stress method and an optimization method, has been introduced in the literature for designing such members. Although the separated-elements model GESO method is well recognized due to its stability, feasibility, and economy, its adequacy has not been experimentally verified. This paper seeks to validate the adequacy of the separated-elements model GESO method against experimental data and demonstrate its feasibility and advantages over the traditional elastic stress method. Two types of reinforced concrete shear wall specimens, which had the location of an opening in the middle bottom and the center region, respectively, were utilized for this study. For each type, two specimens were designed using the separated-elements model GESO method and elastic stress method, respectively. All specimens were subjected to a constant vertical load and an incremental lateral load until failure. Test results indicated that the ultimate bearing capacity, failure modes, and main crack types of the shear walls designed using the two methods were similar, but the ductility indexes including the stiffness degradation, deformability, reinforcement yielding, and crack development of the specimens designed using the separated-elements model GESO method were superior to those using the elastic stress method. Additionally, the shear walls designed using the separated-elements model GESO method, had a reinforcement layout which could closely resist the actual critical stress, and thus a reduced amount of steel bars were required for such shear walls.

• Fire Science and Engineering
• /
• v.19 no.1 s.57
• /
• pp.93-98
• /
• 2005

The purpose of this paper is to judge the damage cause of instrument transformer(MOF; Metering Out Fit) installed in 22.9kV power receiving system. In the three-dimensional analysis of the restored MOF, the damage pattern progressed from inside to outside, there was no damaged part in the upside. The resistance of the carbonized middle part is roughly $100\kappa\Omega$ and the exothermic temperature at inside is presumed as about $300\~800^{\circ}C$ in the result of metallurgical structure analysis. The structure and the composition rate on metal surface by SEM is similar. In the result of FT-IR analysis, we can observe the absorbtion peak at $1500cm^{-1}\;and\;1730 cm^{-1}$ is small. The high exothermic peak showed at the center part of the coil in the result of DTA.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.1009-1014
• /
• 2013

In the present study, using a variation of rib height, the transient response and the performance are investigated. The cell voltage is acquired according to the current density change($0.8A/cm^2$ to $1.0A/cm^2$) under same stoichiometry and relative humidity. The different level of undershoots appeared at the different clamping pressure(1.5MPa and 2.0MPa) and different rib height. At 1.5MPa clamping pressure, rib manufactured cut at $100{\mu}m$ height goes to steady state faster than reference plate and has lower maximum undershoot voltage. But performance is lower than reference plate due to increasing contact resistance.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.151-154
• /
• 2015

The gas sensing characteristic of $MoS_2-MoO_2$ composite yolk-shell spheres were investigated. $MoO_3$-carbon composite spheres were prepared by ultrasonic spray pyrolysis of aqueous droplets containing Mo-source and sucrose in nitrogen, which were converted into $MoO_3$ yolk-shell spheres by heat treatment at $400^{\circ}C$ in air. Subsequently, $MoS_2-MoO_2$ composite yolk-shell spheres were prepared by the partial sulfidation of $MoO_3$. The $MoS_2-MoO_2$ composite yolk-shell spheres showed relatively low and irreversible gas sensing characteristics at < $200^{\circ}C$. In contrast, the sensor showed high and reversible response (S=resistance ratio) to 5 ppm $NO_2$ (S=14.8) at $250^{\circ}C$ with low cross-responses (S=1.17-2.13) to other interference gases such as ethanol, CO, xylene, toluene, trimethylamine, $NH_3$, $H_2$, and HCHO. The $MoS_2-MoO_2$ composite yolk-shell spheres can be used as reliable sensors to detect $NO_2$ in a selective manner.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.530-538
• /
• 2006

There are three important components in tissue engineering: the cells, signaling factors (cytokines and growth factors), and scaffolds. To obtain finely engineered tissue, all three components should perform their individual functions and be fully integrated with each other. For the past few years, we have studied the characteristics of photodimerizable HA (CHA)/alginate (CA) composite materials. CHA/CA complex hydrogels, which were irradiated under UV light and, then treated with calcium ions, were found to have good biocompatibility, mechanical properties and water resistance for implantable tissue scaffolds. In this study, we introduced a cell growth factor (basic fibroblast growth factor; bFGF) into the CHA/CA scaffolds and studied its release behavior. We also introduced tetracycline hydrochloride and flurbiprofen into the same scaffolds as model activation factors and evaluated their release behaviors from the scaffolds. The drug release rate from the materials was influenced by various parameters, such as the degree of crosslinking, the cross linker type, the physico-chemical properties of the drug, and the amount of the drug in the polymer. The results indicated that the negatively charged CHA/CA composite materials showed sustained release behavior and that HA has a particularly strong negative charge, making it attractive toward tetracycline hydrochloride and bFGF, but repulsive toward flurbiprofen.

• Nutrition Research and Practice
• /
• v.13 no.3
• /
• pp.263-267
• /
• 2019

BACKGROUD/OBJECTIVES: Obesity is globally a major public health issue. Evidence suggests that elevated ferritin levels are associated with obesity, dyslipidemia, insulin resistance, and metabolic syndrome. This study was undertaken to examine the relationship between the serum ferritin level and depression in Korean male adults with respect to classification of the prevailing obesity. SUBJECTS/METHODS: This was a case-control study; subjects were classified into obese group (${\geq}25.0kg/m^2$, 28 subjects) and normal group ($18.5-22.9kg/m^2$, 27 subjects). A survey was conducted to assess the depression levels as per the guidelines suggested by the Center program for Epidemiological Studies-Depression (CES-D). Blood was collected from each group for assessing biomarkers, and isolated plasma was evaluated for fasting glucose, insulin, quantitative insulin sensitivity check index, and ferritin levels. Data were analyzed, and groups were compared with respect to Body Mass Index (BMI), depression scale and biomarkers. RESULTS: The average depression score of the obesity group was 16.86, which was higher than the normal group (12.56). Subjects scoring more than 16 points comprised 53.6% of the population in the obese group, which was more than double that in the normal group, as assessed by the CES-D program. Furthermore, the serum ferritin level of the obesity group was 207.12 ng/mL, which was higher than that of the normal group (132.66 ng/mL). Lastly, the BMI appeared to be significantly correlated with both depression (r = 0.320, P = 0.017) and elevated ferritin levels (r = 0.352, P = 0.008). CONCLUSION: This study provides evidence of existing correlation between ferritin and depression with obesity.

• Journal of Hospice and Palliative Care
• /
• v.26 no.2
• /
• pp.42-50
• /
• 2023

Purpose: The purpose of this study was to identify barriers to effective conversations about advance care planning (ACP) and palliative care reported by health care and community-based service providers in Massachusetts, USA. Methods: This qualitative research analyzed open-ended responses to two survey questions, inquiring about perceived barriers to having conversations about ACP and palliative care with patients and consumers. Data were collected between November 2017 and June 2019 from nine organizations in Massachusetts, including health care provider organizations, health insurers, community-based organizations, and a nursing education institution. Two researchers reviewed and coded the responses and identified common themes inductively. Results: Across 142 responses, primary barriers to ACP included hesitation and lack of understanding and knowledge, discomfort and resistance among service providers, lack of staff knowledge, difficulties with followup, and differences in ACP policies across regions. Common barriers to palliative care were misconceptions about palliative care and lack of knowledge, service providers' lack of preparedness, and limited policy support and availability. Challenges relevant to both ACP and palliative care were fear and discomfort around serious illness discussions, lack of knowledge and awareness, discussions that occur too late, and cultural and language barriers. Conclusion: Health care practitioners and community-based professionals reported consumer-, service provider-, and system-level barriers to facilitating conversations about ACP and palliative care with patients experiencing serious illness. There is a need for more tools and support to strengthen service providers' ACP and palliative care competencies and to promote a structured approach to health care planning conversations.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1141-1146
• /
• 2010

Isolated the heterotrophic aerobic bacteria in sandfiltered water on NA and TSBA solid medium, selected 8 dominant species and identified by Sherlock System. Each samples are irradiated 0, 5, 16, 40 and $60\;mJ/cm^2$ using on CBD (Collimated Beam Device) Medium Pressure UV lamp after these identified bacterium did liquid culture how to make $10^6{\sim}10^7\;cells/mL$ suspended in dilution water. Then cultured bacteria are estimated inactivation rate on plate media. Identified Gram positive group are Bacillus Subtilus, Bacillus megaterium, Rhodococcus erythropolis and Microbacterium laevaniformans; Gram negative group are Pseudomonas vesicularis, Pseudomonas pseudoflava, Alcaligenes paradoxus and Zooglea ramigera. These isolation of bacterium are more stronger reference strain and high resistance of MP UV irradiation, Besides Gram negative bacterium are more sensitive Gram positive bacterium on MP UV dose. Now we are estimating to $60{\sim}100\;mJ/cm^2$ MP UV dose for efficient disinfection in water treatment plant.