• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.755-765
• /
• 2008

To investigate correlation between the distribution of marine bacteria and environmental characteristics in the surface sediments of Kamak Bay, chemical oxygen demand(COD), acid volatile sulfide(AVS), ignition loss(IL), total organic carbon(TOC), and total organic nitrogen(TON) were measured and analyzed at 7 stations in winter and summer. In winter, COD and AVS ranged from 13.45 mg/g to 30.06 mg/g(average: 23.58 mg/g) and from 0.03 mg/g to 1.04 mg/g(average: 0.63 mg/g), respectively. IL, TOC, and TON ranged from 8.03% to 11.41%(average: 9.41%), from 1.17% to 2.10%(average: 1.62%), and from 0.09% to 0.18%(average 0.15%), respectively. In summer, COD, AVS, IL, TOC, and TON ranged from 14.06 mg/g to 32.19 mg/g(average: 24.71 mg/g), from 0.03 mg/g to 1.11 mg/g(average: 0.66 mg/g), from 9.00% to 12.15%(average: 10.96%), from 1.27% to 2.12%(average 1.77%), and from 0.12% to 0.19%(average: 0.16%), respectively. These values were relatively higher than those in winter. Kamak Bay had high C/N ratio that might be resulted from the input of terrestrial sewage and industrial wastewater. The number of marine viable bacteria was $8.9{\times}10^4\;cfu/g$ in winter and $9.7{\times}10^5\;cfu/g$ in summer. The most abundant species were Pseudomonas spp., Flavobacterium spp., and Vibrio spp, in the surface sediments of Kamak Bay. It was found that the concentration of organic matters and viable bacterial cells in the inner part were relatively higher than those in the outer of Kamak Bay. The distribution of viable bacterial cells was closely influenced by environmental factors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.471-482
• /
• 2015

In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated through machining and its performance is measured. The fabricated oscillator shows an oscillation frequency of 95 GHz, output power of 12.64 dBm, and phase noise of -92.7 dBc/Hz at 1 MHz offset frequency. To evaluation the maximum power of the InP Gunn diode used in oscillator, the oscillator structure is modified to a structure having a diaphram. The height of thick diaphram which is used in the oscillator is varied. As a result, an oscillator has several different load impedances, which makes it possible to plot $G_L-V^2$ plot at the post plane. Using the $G_L-V^2$ plot, the maximum power of used Gunn diode including post is computed to be 16.8 dBm. Furthermore using the shorted and zero bias Gunn diode, the post loss used for DC biasing can be computed. Using the two losses, The maximum power of a InP Gunn diode is computed to be 18.55 dBm at 95 GHz. This result is close to a datasheet.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.900-913
• /
• 1998

Despite of technical difficulties, the combination of occlusal projection and densitometric digital analysis may ultimately provide a means of detection of subtle bone loss at the facial and lingual side of dental implant (Oblique occlusal view is more useful for $ITI^{(R)}$ dental implant due to its contour of shoulder as like tulip flower). In this study, conventional periapical projections of x-ray beam had shown more high sensitivity to detect the bony defects than oblique occlusal projections in alveolar crest obscured by dental implants or not, even if the difference was not statistically significant. Unlike conventional periapical projections. occusal projections combined with densitometric digital analysis technique may provide a means for detection of subtle bone change at the all around of implants without obscuring effect by implant itself. Although the results from this in vitro study were performed under limited circumstances, these results might afford more possibility and versatile modality of diagnosis options to clinician in the implant practice.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.275-282
• /
• 2020

Recently, the occurrence of a ship capsizing was analyzed as the main cause of the lack of stability or loss because of the improper management of the center of gravity, the movement of cargo or heavy weight when excessive steering occurs or when navigating during bad weather. Thus, to prevent a ship from capsizing, it is necessary to secure stability to enable the ship's return to its upright position, even if a dangerous heel occurs. The GM is a crucial evaluation factor regarding stability, which the navigation officer uses to preserve stability. In this study, based on the stability data collected from the operating of ships for five years, The GM by ship's type according to the operating status was analyzed specifically such as a ship's length, breadth, and gross tonnage. The feature of the GM distribution according to a ship's length was confirmed, and after performing the correlation analysis between the breadth and the GM, the ratio of the GM to breadth was calculated, and the result was compared with the previous ratio. Additionally, a simple approximation formula and minimum GM for the estimation of the GM by ship type were proposed by the regression analysis of the GM using the gross tonnage (GT)/breadth (B) to reflect the trend of larger ships being built. The results of this study are expected to be used as data for the review of securing a stable GM on ships.

• Industry Promotion Research
• /
• v.5 no.2
• /
• pp.33-40
• /
• 2020

When most middle-aged women live in a time when they have to take responsibility for their lives, they feel lonely when they realize that their experience of not expressing their feelings properly has ended up being left alone due to their own existence and loss. As the first step in conscious awareness of unconsciousness of middle-aged women through analytical psychology, we performed "Mandara" and "Nanhwa Mandara," which meet me inside. The intermediate stage can be divided into transition and work phase. The working phase, develops one's own advantages and unique strengths that meet the inner world of promoting and acting values, correctly looks at reality, corrects emotion perception and balance, and is self-contained, seed mandala, associative mandala. They performed the strong points of mandala, the free mandala, and the Western mandala. The results of the study showed that mandala art therapy was found in middle-aged women. First, Mandarin art therapy experience affects the physical, psychological and human relations aspects of middle-aged women. Second, middle-aged women's experience of individualization through mandala art therapy shows psychological reversals and affects positive thinking and self-effectiveness. This study was suitable for qualitative research that approached the essence through practical understanding and direct exploration of research participants, and it is meaningful to suggest that it is necessary to develop an art therapy program through various mediums considering the lack of art therapy research in middle-aged women and problems experienced by the physician.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.293-304
• /
• 2011

The purpose of this study was to investigate the displacement and pattern of stress distribution on periodontal ligaments of maxillary first and second molar, and on orthodontic mini-implant (OMI) surface, according to three different insertion angles to the bone surface of OMI using Dragon helix appliance, which is a newly introduced scissors-bite correcting appliance. OMI were placed between second premolar and first molar with three different insertion angles (45, 60, 90 degrees). Displacement and maximum stress distribution area (MSDA) were analyzed by finite element analysis. When the insertion angle to the alveolar bone surface was 90 degrees, maxillary first and second molar both exhibited MSDA at the palatal root apex. Maxillary first molar did not show any significant displacement, while the second molar exhibited intrusive and palatal displacement. On the OMI, as the insertion angle decreased, the MSDA shifted towards the tip, and the amount of displacement had increased. When the OMI was inserted at a 90 degree angle, anchor loss was minimized and scissors-bite correcting effect was maximized.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.30-37
• /
• 1989

The PIN type a-SiC:H/a-Si:H heterojunction solar cells were fabricated by using the rf glow discharge decomposition of $SiH_4$ mixed with $CH_4,B_2,H_6\;and\;PH_3.$ The efficiency of the solar cell of the $SnO_2/ITO$ was higher than that of ITO transparent oxide layer by 1.5%. The P layer was prepared with the thickness of $100{\AA}$ and $CH_4/SiH_4$ ration of 5. The I layer has been deposited on the P layer and it is not pure intrinsic but near N type. So $SiH_4$ mixed with $B_2H_6$ of 0.3ppm was used to change this N type nature to intrinsic having the thickness of 5000${\AA}$. And consecutively, the N layer was deposited with t ethickness of $400{\AA}$ using $SiH_4/PH_3$ mixtures. The solar cell demonstrated 0.94V of $V_{oc'}$ 14.6mA/cm of $J_{sc}$ and 58.2% of FF, resulting the efficiency of 8.0%. To minimize loss by the reflection of light, $MgF_2$ layer was coated on the lgass and the efficiency was improved by 0.5%. Therefore, the solar cell indicated overall efficiency of 8.5%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.41-46
• /
• 2003

In order to evaluate the sufficient etching time for successful bonding and also minimizing unnecessary mineral loss, the enamel surface roughness analysis was performed using confocal laser scanning microscopy. Sixty extracted sound human molar teeth were imbedded in the center of acrylic cylinder using self-curing clear resin exposing buccal surface, and then polished with series of SiC paper(220, 500, 800, 1000, 2000, 4000 grit). Each specimen was randomly assigned to six groups(N=10). 37% phosphoric acid was applied to the polished tooth surface for 10, 20, 30, 40, 50, 60 seconds respectively and washed with copious water. After the surface roughness analysis, five roughness parameters(Sa, Sq, Sz, Sdr, Ra) were statistically analysed by ANOVA and Duncan post hoc test. We found that the all five parameters had higher roughness value in 30 seconds etching time, especially parameter Sz showed the lowest value in 10 seconds etching time and the highest value in 30 seconds etching time compared with the other etching times(p<0.05).

• Tuberculosis and Respiratory Diseases
• /
• v.81 no.4
• /
• pp.311-318
• /
• 2018

Background: The aim of this study was to examine the influence of body mass index (BMI) on the development of acute kidney injury (AKI) in critically ill patients in intensive care unit (ICU). Methods: Data of patients admitted to medical ICU from December 2011 to May 2014 were retrospectively analyzed. Patients were classified into three groups according to their BMI: underweight (< $18.5kg/m^2$), normal ($18.5-24.9kg/m^2$), and overweight (${\geq}25kg/m^2$). The incidence of AKI was compared among these groups and factors associated with the development of AKI were analyzed. AKI was defined according to the Risk, Injury, Failure, Loss of kidney function, and End-stage (RIFLE) kidney disease criteria. Results: A total of 468 patients were analyzed. Their mean BMI was $21.5{\pm}3.9kg/m^2$, including 102 (21.8%) underweight, 286 (61.1%) normal-weight, and 80 (17.1%) overweight patients. Overall, AKI occurred in 82 (17.5%) patients. The overweight group had significantly (p<0.001) higher incidence of AKI (36.3%) than the underweight (9.8%) or normal group (15.0%). In addition, BMI was significantly higher in patients with AKI than that in those without AKI ($23.4{\pm}4.2$ vs. $21.1{\pm}3.7$, p<0.001). Multivariate analysis showed that BMI was significantly associated with the development of AKI (odds ratio, 1.893; 95% confidence interval, 1.224-2.927). Conclusion: BMI may be associated with the development of AKI in critically ill patients.

• Molecules and Cells
• /
• v.37 no.12
• /
• pp.873-880
• /
• 2014

In our previous study, miRNA-183, a miRNA in the miR-96-182-183 cluster, was significantly over-expressed in esophageal squamous cell carcinoma (ESCC). In the present study, we explored the oncogenic roles of miR-183 in ESCC by gain and loss of function analysis in an esophageal cancer cell line (EC9706). Genome-wide mRNA micro-array was applied to determine the genes that were regulated directly or indirectly by miR-183. 3'UTR luciferase reporter assay, RT-PCR, and Western blot were conducted to verify the target gene of miR-183. Cell culture results showed that miR-183 inhibited apoptosis (p < 0.05), enhanced cell proliferation (p < 0.05), and accelerated G1/S transition (p < 0.05). Moreover, the inhibitory effect of miR-183 on apoptosis was rescued when miR-183 was suppressed via miR-183 inhibitor (p < 0.05). Western blot analysis showed that the expression of programmed cell death 4 (PDCD4), which was predicted as the target gene of miR-183 by microarray profiling and bioinformatics predictions, decreased when miR-183 was over-expressed. The 3'UTR luciferase reporter assay confirmed that miR-183 directly regulated PDCD4 by binding to sequences in the 3'UTR of PDCD4. Pearson correlation analysis further confirmed the significant negative correlation between miR-183 and PDCD4 in both cell lines and in ESCC patients. Our data suggest that miR-183 might play an oncogenic role in ESCC by regulating PDCD4 expression.