• Title/Summary/Keyword: center gap

Search Result 1,261, Processing Time 0.027 seconds

Numerical analysis of FEBEX at Grimsel Test Site in Switzerland (스위스 Grimsel Test Site에서 수행된 FEBEX 현장시험에 대한 수치해석적 연구)

  • Lee, Changsoo;Lee, Jaewon;Kim, Geon-Young
    • Tunnel and Underground Space
    • /
    • v.30 no.4
    • /
    • pp.359-381
    • /
    • 2020
  • Within the framework of DECOVALEX-2019 Task D, full-scale engineered barriers experiment (FEBEX) at Grimsel Test Site was numerically simulated to investigate an applicability of implemented Barcelona basic model (BBM) into TOUGH2-MP/FLAC3D simulator, which was developed for the prediction of the coupled thermo-hydro-mechanical behavior of bentonite buffer. And the calculated heater power, temperature, relative humidity, total stress, saturation, water content and dry density were compared with in situ data monitored in the various sections. In general, the calculated heater power and temperature provided a fairly good agreement with experimental observations, however, the difference between power of heater #1 and that of heater #2 could not captured in the numerical analysis. It is necessary to consider lamprophyre with low thermal conductivity around heater #1 and non-simplified installation progresses of bentonite blocks in the tunnel for better modeling results. The evolutions and distributions of relative humidity were well reproduced, but hydraulic model needs to be modified because the re-saturation process was relatively fast near the heaters. In case of stress evolutions due to the thermal and hydraulic expansions, the computed stress was in good agreement with the data. But, the stress is slightly higher than the measured in situ data at the early stage of the operation, because gap between rock mass and bentonite blocks have not been considered in the numerical simulations. The calculated distribution of saturation, water content, and dry density along the radial distance showed good agreement with the observations after the first and final dismantling. The calculated dry density near the center of the FEBEX tunnel and heaters were overestimated compared with the observations. As a result, the saturation and water content were underestimated with the measurements. Therefore, numerical model of permeability is needed to modify for the production of better numerical results. It will be possible to produce the better analysis results and more realistically predict the coupled THM behavior in the bentonite blocks by performing the additional studies and modifying the numerical model based on the results of this study.

A Phylogenetic Analysis of Otters (Lutra lutra) Inhabiting in the Gyeongnam Area Using D-Loop Sequence of mtDNA and Microsatellite Markers (경남지역 수달(Lutra lutra)의 mitochondrial DNA D-loop지역과 microsatellite marker를 이용한 계통유전학적 유연관계 분석)

  • Park, Moon-Sung;Lim, Hyun-Tae;Oh, Ki-Cheol;Moon, Young-Rok;Kim, Jong-Gap;Jeon, Jin-Tae
    • Journal of Life Science
    • /
    • v.21 no.3
    • /
    • pp.385-392
    • /
    • 2011
  • The otter (Lutra lutra) in Korea is classified as a first grade endangered species and is managed under state control. We performed a phylogenetic analysis of the otter that inhabits the Changnyeong, Jinju, and Geoje areas in Gyeongsangnamdo, Korea using mtDNA and microsatellite (MS) markers. As a result of the analysis using the 676-bp D-loop sequence of mtDNA, six haplotypes were estimated from five single nucleotide polymorphisms. The genetic distance between the Jinju and Geoje areas was greater than distances within the areas, and the distance between Jinju and Geoje was especially clear. From the phylogenetic tree estimated using the Bayesian Markov chain Monte Carlo analysis by the MrBays program, two subgroups, one containing samples from Jinju and the other containing samples from the Changnyeong and Geoje areas were clearly identified. The result of a parsimonious median-joining network analysis also showed two clear subgroups, supporting the result of the phylogenetic analysis. On the other hand, in the consensus tree estimated using the genetic distances estimated from the genotypes of 13 MS markers, there were clear two subgroups, one containing samples from the Jinju, Geoje and Changnyeong areas and the other containing samples from only the Jinju area. The samples were not identically classified into each subgroup defined by mtDNA and MS markers. It could be inferred that the differential classification of samples by the two different marker systems was because of the different characteristics of the marker systems used, that is, the mtDNA was for detecting maternal lineage and the MS markers were for estimating autosomal genetic distances. Nonetheless, the results from the two marker systems showed that there has been a progressive genetic fixation according to the habitats of the otters. Further analyses using not only newly developed MS markers that will possess more analytical power but also the whole mtDNA are needed. Expansion of the phylogenetic analysis using otter samples collected from the major habitats in Korea should be helpful in scientifically and efficiently maintaining and preserving them.

A Study on Home Economics Teachers' Concern for Performance Assessment and Its Implementation (기술ㆍ가정과 교사의 수행평가에 대한 관심도, 실행수준, 실행실태 및 관련변수)

  • 정미정;채정현
    • Journal of Korean Home Economics Education Association
    • /
    • v.16 no.1
    • /
    • pp.79-91
    • /
    • 2004
  • The purpose of this study was to examine how much secondary school home economics teachers paid attention to performance assessment, to what extent and in which way they carried it out and how much support was given to that. It's basically meant to help provide more systematic support for performance assessment. The instrument used in this study was an Interest-Based Reform Adoption Model developed by Hall. Hord and et. al. at Texas University Research & Development Center for Teacher Education. and the subjects in this study were home economics teachers from 95 secondary schools in Gyeonggi province. After a survey was conducted by mail. the responses from 157 teachers were chosen for analysis. For data handling. SPSS/WIN program was utilized, and statistical data on mean. standard deviation and percentage were obtained. In addition. t-test and ANOVA were employed. The major findings of this study were as follows: First. as for their type of interest in performance assessment. influential type(35.0%) was most common. followed by confident type (29.3%). indifferent type(20.4%) and task type(15.3%). Second, regarding their implementation. every teacher carried out performance assessment. The largest group of the teachers fulfilled it as part of routine daily schedule(60 teachers. 38.2%). which could be called the level 4. The second largest group tried to integrate performance assessment to education programs(53 teachers. 33.8%). which could be called the level 5. The third largest group implemented it without making careful preparations for that(26 teachers. 16.6%). which could be called the level 3. and the fourth largest group tried to reinvent it(11 teachers. 7.0%), which could be called the level 6. The fifth largest group was in the middle of researching it(5 teachers, 3.2%). which could be called the level 1. And the sixth largest group was in the course of making preparations for that(2 teachers. 1.3%) . which could be named the level 2. Third. concerning how much they found themselves to be supported about performance assessment. they eave three or less marks to that. which showed that they weren't supported sufficiently There was little gap among them in their concern for performance assessment and its implementation levels. and this fact suggested that there wasn't satisfactory backup for their performance assessment.

  • PDF

MODULATION OF INTRACELLULAR pH BY $Na^+/H^+$ EXCHANGER AND $HCO_3^-$ TRANSPORTER IN SALIVARY ACINAR CELLS ($Na^+/H^+$ exchanger와 $HCO_3^-$ transporter에 의한 흰쥐 타액선 선세포내 pH 조절)

  • Park, Dong-Bum;Seo, Jeong-Taeg;Sohn, Heung-Kyu;Lee, Jong-Gap
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.25 no.2
    • /
    • pp.352-367
    • /
    • 1998
  • Intracellular pH (pHi) plays an important role in the regulation of cellular processes by influencing the acitivity of various enzymes in cells. Therefore, almost every type of mammalian cell possesses an ability to regulate its pHi. One of the most prominent mechanisms in the regulation of pHi is $Na^+/H^+$ exchanger. This exchanger has been known to be activated when cells are stimulated by the binding of agonist to the muscarinic receptors. Therefore, the aims of this study were to compare the rates of $H^+$ extrusion through $Na^+/H^+$ exchanger before and during muscarinic stimulation and to investigate the possible existence of $HCO_3^-$ transporter which is responsible for the continuous supply of $HCO_3^-$ ion to saliva. Acinar cells were isolated from the rat mandibular salivary glands and loaded with pH-sensitive fluoroprobe, 2', 7'-bis(2-carboxyethyl)-5(6)-carboxyfluorescein(BCECF), for 30min at room temperature. Cells were attached onto the coverglass in the perfusion chamber and the changes in pHi were measured on the iverted microscope using spectrofluorometer. 1. By switching the perfusate from $HCO_3^-$-free to $HCO_3^-$-buffered solution, pHi decreased by $0.39{\pm}0.02$ pH units followed by a slow increase at an initial rate of $0.04{\pm}0.007$ pH units/min. The rate of pHi increase was reduced to $0.01{\pm}0.002$ pH units/min by the simultaneous addition of 1 mM amiloride and $100{\mu}M$ DIDS. 2. An addition and removal of $NH_4^+$ caused a decrease in pHi which was followed by an increase in pHi. The increase of pHi was almost completely blocked by 1mM amiloride in $HCO_3^-$-free perfusate which implied that the pHi increase was entired dependent on the activation of $Na^+/H^+$ exchanger in $HCO_3^-$-free condition. 3. An addition of $10{\mu}M$ carbachol increased the initial rate of pHi recovery from $0.16{\pm}0.01$ pH units/min to $0.28{\pm}0.03pH$ units/min. 4. The initial rate of pHi decrease induced by 1mM amiloride was also increased by the exposure of the acinar cells to $10{\mu}M$ carbachol ($0.06{\pm}0.008pH$ unit/min) compared with that obtained before carbachol stimulation ($0.03{\pm}0.004pH$ unit/min). 5. The intracellular buffering capacity ${\beta}1$ was $14.31{\pm}1.82$ at pHi 7.2-7.4 and ${\beta}1$ increased as pHi decreased. 6. The rate of $H^+$ extrusion through $Na^+/H^+$ exchanger was greatly enhanced by the stimulation of the cells with $10{\mu}M$ carbachol and there was an alkaline shift in the activity of the exchanger. 7. An intrusion mechanism of $HCO_3^-$ was identified in rat mandibular salivary acinar cells. Taken all together, I observed 3-fold increase in $Na^+/H^+$ exchanger by the stimulation of the acinar cells with $10{\mu}M$ carbachol at pH 7.25. In addition, I have found an additional mechanism for the regulation of pHi which transported $HCO_3^-$ into the cells.

  • PDF

THEORETICAL STUDY ON OBSERVED COLOR-MAGNITUDE DIAGRAMS

  • Lee, See-Woo
    • Journal of The Korean Astronomical Society
    • /
    • v.12 no.1
    • /
    • pp.41-70
    • /
    • 1979
  • From $B\ddot{o}hm$-Vitense's atmospheric model calculations, the relations, [$T_e$, (B-V)] and [B.C, (B-V)] with respect to heavy element abundance were obtained. Using these relations and evolutionary model calculations of Rood, and Sweigart and Gross, analytic expressions for some physical parameters relating to the C-M diagrams of globular clusters were derived, and they were applied to 21 globular clusters with observed transition periods of RR Lyrae variables. More than 20 different parameters were examined for each globular cluster. The derived ranges of some basic parameters are as follows; $Y=0.21{\sim}0.33,\;Z=1.5{\times}10^{-4}{\sim}4.5{\times}10^{-3},\;age,\;t=9.5{\sim}19{\times}10^9$ years, mass for red giants, $m_{RG}=0.74m_{\odot}{\sim}0.91m_{\odot}$, mass for RR Lyrae stars, $m_{RR}=0.59m_{\odot}{\sim}0.75m_{\odot}$, the visual magnitude difference between the turnoff point and the horizontal branch (HB), ${\Delta}V_{to}=3.1{\sim}3.4(<{\Delta}V_{to}>=3.32)$, the color of the blue edge of RR Lyrae gap, $(B-V)_{BE}=0.17{\sim}0.21=(<(B-V)_{BE}>=0.18),\;[\frac{m}{L}]_{RR}=-1.7{\sim}-1.9$, mass difference of $m_{RR}$ relative to $m_{RG},(m_{RG}-m_{RR})/m_{RG}=0.0{\sim}0.39$. It was found that the ranges of derived parameters agree reasonably well with the observed ones and those estimated by others. Some important results obtained herein can be summarized as follows; (i) There are considerable variations in the initial helium abundance and in age of globular clusters. (ii) The radial gradient of heavy element abundance does exist for globular clusters as shown by Janes for field stars and open clusters. (iii) The helium abundance seems to have been increased with age by massive star evolution after a considerable amount (Y>0.2) of helium had been attained by the Big-Bang nucleosynthesis, but there is not seen a radial gradient of helium abundance. (iv) A considerable amount of heavy elements ($Z{\sim}10{-3}$) might have been formed in the inner halo ($r_{GC}$<10 kpc) from the earliest galactic co1lapse, and then the heavy element abundance has been slowly enriched towards the galactic center and disk, establishing the radial gradient of heavy element abundance. (v) The final galactic disk formation might have taken much longer by about a half of the galactic age than the halo formation, supporting a slow, inhomogeneous co1lapse model of Larson. (vi) Of the three principal parameters controlling the morphology of C-M diagrams, it was found that the first parameter is heavy clement abundance, the second age and the third helium abundance. (vii) The globular clusters can be divided into three different groups, AI, BI and CII according to Z, Y an d age as well as Dickens' HB types. BI group clusters of HB types 4 and 5 like M 3 and NGC 7006 are the oldest and have the lowest helium abundance of the three groups. And also they appear in the inner halo. On the other hand, the youngest AI clusters have the highest Z and Y, and appear in the innermost halo region and in the disk. (viii) From the result of the clean separations of the clusters into three groups, a three dimensional classification with three parameters, Z, Y and age is prsented. (ix) The anomalous C-M diagrams can be expalined in terms of the three principal parameters. That is, the anomaly of NGC 362 and NGC 7006 is accounted for by the smaller age of the order of $1{\sim}2{\times}10^9$ years rather than by the helium abundance difference, compared with M 3. (x) The difference in two Oosterhoff types I and II can be explained in terms of the mean mass difference of RR Lyrae variables rather than in terms of the helium abundance difference as suggested by Stobie. The mean mass of the variables in Oosterhoff type I clusters is smaller by $0.074m_{\odot}$ which is exactly consistent with Rood's estimate. Since it was found that the mean mass of RR Lyrae stars increases with decreasing Z, the two Oosterhoff types can be explained substantially by the metal abundance difference; the type II has Z<$3.4{\times}10^{-4}$, and the type I has higher Z than the type II.

  • PDF

A Study on Goryo Celadons of intaglio '○' pattern and '⊙'pattern (고려 음각 '○'문과 '⊙'문청자의 연구)

  • Han, Seong-Uk
    • KOMUNHWA
    • /
    • no.70
    • /
    • pp.133-161
    • /
    • 2007
  • It is judged that celadons with '○' pattern and '⊙' pattern have the indication of manufacturer by engraving mark at the internal center of the bottom. These celadons were produced at No.8.23.27 kiln sites located at Sadang-ri(사당리), Daegu-myon(대구면), Gangjin-gun(강진군), Jeollanamdo(전라남도), Korea and '⊙’ patterned celadon porcelain was found only at No. 23 and 27 kiln sites, so it is assumed that its production sites were limited. Kinds of celadons included bowl, dish, cup, bottle, case and vessel for emptied wine and there were a lot of dishes with a variety of patterns. These celadons were engraved by molded design technique using the same ceramic design as the pattern of celadons in the period of their prosperity and it was appropriate method to produce celadons of a good quality with production method to keep decorative design like pattern or size uniformly. It was also found that inlay method was not universalized in this period and similar celadons were produced with molded design in large quantities. These celadons had partially fire clay temper, but most of them were burnt by supporting the inner bottom of U-type base with quartzite after whole glazing. It was known through relics excavated at Seokreung(석릉) royal tomb of King Heejong(희종) at Ganghwa(강화) and Hyeeumwon(혜음원) temple site at Paju(파주) and military house at Wakamiyaoji(약궁대로) avenue Kamakura(겸창)-city, Japan(일본) that these celadons were manufactured at two quarters of the 13th century centering around 1230s. Therefore, these celadons will be significant materials to fill the gap of the celadons in the 13th century resulted from the record chronologically that green celadons were manufactured in the 12th century. And this period was invaded by Mongolia(몽고), but central control was achieved and green celadons were continuously produced. It was also considered that these celadons were excavated at Gabgot-ri(갑곶리) and Gwanchung-ri(관청리), Ganghwa(강화), Hyeeumwon temple, Paju which played the role of temporary palace, Bu1guksa(불국사) temple at Gyeongju(경주), Silsangsa(실상사) temple at Namwon(남원) and relics of Jangheung(장흥) adjacent to Daeguso(대구소) and these were produced for high class.

  • PDF

The effect of cavity wall property on the shear bond strength test using iris method (Iris 법을 이용한 전단접착강도 측정에서 와동벽의 영향)

  • Kim, Dong-Hwan;Bae, Ji-Hyun;Cho, Byeong-Hoon;Lee, In-Bog;Baek, Seung-Ho;Ryu, Hyun-Mi;Son, Ho-Hyun;Um, Chung-Moon;Kwon, Hyuck-Choon
    • Restorative Dentistry and Endodontics
    • /
    • v.29 no.2
    • /
    • pp.170-176
    • /
    • 2004
  • Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p=0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p=0.005), but not in $ALL-BOND^{\circledR}$ 2 (p=0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions:The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

A Review of Service Innovation Research: A Comparison of Domestic and International Research Papers (서비스혁신 연구 동향: 국내 및 해외 주요 학술지를 중심으로)

  • Ryu, Hyun-Sun
    • Asia pacific journal of information systems
    • /
    • v.24 no.4
    • /
    • pp.577-610
    • /
    • 2014
  • Although service innovation is not a new concept, innovation research in general tends to focus on technological innovation by manufacturing firms. With this view, innovation studies focus on product(e.g., goods) and process(e.g., product systems) innovation, ignoring service innovation and its inherent opportunities. Since major economy has been transformed to service economy, service innovation is considered a new effective way to sustain and gain a competitive advantage. Service innovation is no longer regarded merely as a side activity to product innovation; it has become a main research topic in its own right, accompanied by an increasing focus on services. While the number of service innovation studies has increased dramatically in the past 30 years in international research, few studies have been performed in domestic studies because domestic service innovation research began from the middle of 2000. In addition, there are no comprehensive literature reviews describing the evolution of service innovation research in both international and domestic studies because of the heterogeneities of service industry and multidiscipline characteristics of service innovation studies. To bridge this research gap, the purpose of this paper is to perform an extensive literature review and synthesis to enable a critical review of extant research on service innovation and trace its evolution, which will establish a foundation for further studies. By reviewing 169 articles (136 international papers; 33 domestic papers) published between 2000 and 2014 (in past 15 years), primarily in leading service, innovation and management information systems journals, this study analyzes the progression of service innovation research according to the four aspects such as number of studies, topics, methodologies and target industries. Overall, the view of service innovation has evolved, from a complement of traditional product innovation to a multidimensional, all-encompassing concept that entails several functions, both within and outside the firms. The results showed that domestic research still stays at the formation phase of service innovation studies although international research is in the maturity or multidimensional phase. We found increasing recent activities pertaining to service innovation, resulting from the increasing interest in services innovation across various industries and the links of new topics to the service innovation concept in both international and domestic studies. However, the main focus of service innovation research showed a different propensity between international and domestic studies: the former mainly focuses on a much more diversified pattern, emphasizing the linkages between service innovation and business strategy while the latter mainly focuses on the service innovation process(system) and service design. In addition, there are many case studies in domestic studies while many empirical studies in international studies. Domestic studies should increases the understanding of the interplay between service innovation and product innovation within manufacturing firms. Furthermore, rather than focusing on intrinsic distinctions between service innovation and product innovation, researchers should strive to develop and conceptualize service innovation in domestics studies. The present research also provides useful implications for practitioners. First, this study contributes to expand the current understanding of service innovation research by performing an extensive literature review. Second, tracing and comparing the progression and trends of service innovation research between international and domestic studies, this study showed the similarities and differences between them, which provide practical guidance on future research directions and research agenda. Third, this study performed literature review establishing the analysis system in the initial stage and using them to analyze articles, which is leading to explain the research review of service innovation more systematically and objectively. Finally, this study suggests the domestic researchers their future interests and topics of service innovation research.

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.04a
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

A Study on the Direction of Human Identity and Dignity Education in the AI Era. (AI시대, 인간의 정체성과 존엄성 교육의 방향)

  • Seo, Mikyoung
    • Journal of Christian Education in Korea
    • /
    • v.67
    • /
    • pp.157-194
    • /
    • 2021
  • The issue of AI's ethical consciousness has been constantly on the rise. AI learns and imitates everything behavior human beings do, just like a child. Therefore, the ethical consciousness we currently demand from AI is first the ethical consciousness required of humans, and at the center of it is the dignity of humans. Thus, this study analyzed human identity and its problems according to the development of AI technology, apologized the theological premises and characteristics of human dignity, and sought the direction of human dignity education as follows. First, this study discussed the development of AI and its relation to human beings. The development of AI's technology has led to the sharing of "reason or intelligence" with machines called AI which have been restricted to the exclusive property of mankind. This raised the question of the superior humanity which humans would be remained to be distinguished from AI machines. Second, this study discussed transhumanism and human identity. Transhumanism has been argued for the combination of AI machines and humans in order to improve inefficient human intelligence and human capabilities. However, the combination of AI machines with humans raised the issue of human identity. In the AI era, human identity is to believe thoughts that God had when he built us. Third, this study apologized theological premise and characteristic about human dignity. Human dignity has become a key concept of the constitution and international human rights treaties around the world. Nonetheless, declarative conviction that human is dignified is difficult to be understanded without Christian theological premise. Theological premise of human dignity lies on the fact that human is dignified feature being granted life by Heavenly Father. This feature lies on longing for "Goodness" and "eternality", pursuit of beauty, a happy being in relationship with others. Fourth, this study presented the direction of human dignity education. The direction of human dignity education has to awaken what is identity of human and how human beings were created and how much they are precious. Furthermore, it lead human to ponder consciously and accept the highest value of what human beings are, how they were created, and how precious they are. That is about educating human identity, and its core is that regardless of the circumstances - the wealth gap, knowledge level, skin color, gender, age, disability, etc. - all people are in God's image and for the glory of God, thereby being very important to God.