• 한국콘텐츠학회논문지
• /
• 제13권8호
• /
• pp.11-19
• /
• 2013

본 논문은 넓은 시야각을 갖는 어안렌즈로 촬영 시, 발생하는 방사 왜곡을 보정하는데 있어 왜곡의 중심을 추정하는 방법을 제안한다. FOV 왜곡 보정 모델의 경우 렌즈의 왜곡중심을 별도로 추정하지 않기 때문에 영상의 중심점과 렌즈의 왜곡중심의 오차가 클수록 왜곡보정의 정확도가 떨어지는 단점이 있다. 이에 본 논문은 광각 렌즈에서 FOV 모델과 2D 패턴을 이용하여 렌즈의 왜곡중심 추정을 통해 보다 정밀한 왜곡 보정 방법을 제안한다. 이를 위해 FOV 모델로부터 발생하는 왜곡곡선을 직선과 비교하여 곡선과 직선의 차가 가장 적은 위치를 왜곡의 중심으로 설정한다. 이 방법을 통하여 렌즈와 센서 중심점의 오차에 의해 발생하는 왜곡 중심 추정의 정확도를 향상시킬 수 있었고 실험결과를 통하여 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.198-207
• /
• 1999

This paper presents an accurate algorithm for geometric calibration of X-ray imaging system. Calibration is a very important process for improving an imaging system performance. There has been a lot of previous works using linear camera modeling technique, where lens distortion is neglected and/or center of distortion is assumed to be known. Geometrical distortion of image intensifier, however, is very large and its center of distortion should be calculated. This paper presents a new calibration method to estimate the intensifier position and orientation, scale factor, distortion coefficient, magnification factor, and center of distortion using the least square method. We investigate the properties of the algorithm by computer simulation. Simulation results show that the parameters can be estimated accurately using the proposed algorithm.

• 한국광학회지
• /
• 제20권2호
• /
• pp.87-93
• /
• 2009

스테레오 영상에서 관찰자의 위치 변화는 왜곡 발생의 주요 원인이다. 특히, 디스플레이 장치의 중심을 기준으로 한 관찰자의 회전 이동은 관찰자 양안의 수평위치가 다르므로 수평, 전후 이동과는 다른 스테레오 영상의 왜곡이 크게 발생하게 된다. 본 논문에서는 전산모사를 통하여 관찰자의 회전이동에 의한 왜곡을 분석하였고 왜곡 보정결과도 보였다. 마지막으로 관찰자의 회전이동과 수평, 전후 이동의 왜곡형태를 비교를 통하여 두 이동에서 나타나는 왜곡의 형태가 다름을 보였다.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.20-27
• /
• 2016

This study deals with the proper conditions of the trail rolling method (TRM) for the prevention of the buckling welding distortion at the AA5083 GMA butt weldment. For it, the effect of the working conditions of TRM including the rolling depth and the rolling distance between the welding torch and the roller on the longitudinal welding shrinkage force of the weldment was evaluated by using 3 dimensional thermo-mechanical FE analyses. The longitudinal welding shrinkage force inducing the buckling welding distortion at the GMA butt weldment was mitigated with an increase in the rolling depth and the rolling distance between the welding torch and the roller. Based on the results, the proper conditions of trail rolling method were established to reduce the longitudinal welding shrinkage force of the GMA butt weldment to below the critical value corresponding to the bucking distortion.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.234-238
• /
• 2016

A new method to design a low distortion, even relative illumination, optical see-through head-mounted display (HMD) with a freeform reflective mirror (FFRM) based on the two similar ellipsoids structure is proposed. The HMD we have realized has a simple structure which consists of two similar ellipsoid surfaces, an FFRM, a 7-piece co-axis relay lens, and an OLED. This structure can be applied to offset distortion, reach even relative illumination, and correct the off-axis aberrations. The HMD we finally have realized has a near 3% low distortion, a higher than 80% relative illumination, and a 40°×30° field of view (FOV).

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.360-363
• /
• 2009

Variation of viewing position of the observer is one of factors of image distortion in the stereoscopic display. A rotation movement of the observer makes the stereoscopic image distortion and that is caused by different horizontal position of each eye of the observer. It is different from horizontal and depth directional movement of the observer. In this paper, we showed the numerical simulation result about the distortion analysis and the correction of the stereoscopic image in rotation movement of the observer.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.335-336
• /
• 2008

We observe the distortion of the back scattered Stokes pulse and the complementary distortion of the transmitted pulse by the stimulated Brillouin scattering when a Q-switched Nd:YAG laser pulse injected into a single mode optical fiber. We determine the constant required energy for the SBS by comparing their temporal shapes.

• 정신간호학회지
• /
• 제27권4호
• /
• pp.370-379
• /
• 2018

Purpose: The purpose of this study was to test the mediating effect of depression on the relationship between gambling severity and cognitive distortion in Koreans with a gambling disorder. Methods: Secondary data from a comprehensive assessment of problematic gambling between 2015 and 2017 on Korea Center on Gambling Problems were used. The subjects in this study were 254 Koreans with that gambling disorder. Data were collected with self-report structured questionnaires which included individual characteristics, the Korean version of Problem Gambling Severity Index, the Center for the Epidemiologic Studies Depression, and the Gambling Related Cognitions Scale. Data were analyzed by using descriptive statistics, independent t-test, one-way ANOVA with the $Scheff{\acute{e}}$ test, Pearson's correlation coefficients, and a mediation analysis of the Baron and Kenny method with the SPSS 22.0 program. Results: Significant correlations emerged among the three variables, gambling severity, depression, and cognitive distortion. Depression exerted a partial mediating effect (${\beta}=.20$, p<.001) on the relationship between gambling severity and cognitive distortion (Sobel test: z=2.33, p=.012). Conclusion: Based on this study's findings, nursing intervention programs focused on managing gambling severity and decreasing depression are highly recommended to alleviate cognitive distortion in people with a gambling disorder.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권4호
• /
• pp.305-312
• /
• 2022

The proportion and testing of portable radiation tests, which are limited at the request of the doctor, are gradually increasing only for patients in emergency situations and difficulties in moving. However, as there are many limiting factors compared to fixed devices, this study intends to measure and analyze the distortion of images according to the angle of the detector and the change in dose according to the position of the subject. For distortion experiments using a mobile radiation generator used in Hospital A, the SID was tilted by 110 cm, 14"×17" wireless FPD detector to 0°, -5°, -10°, -15°, -20°, and -35° to measure the change in area. The dose according to the location of the detector was analyzed on average by measuring the central dose at 110 cm of the SID and measuring the dose of 9 locations three times each. The analysis result of distortion by location according to the angle of the detector showed a statistically significant difference (f=58.74, p<0.000). Therefore, it can be seen that the angle of the detector and the tube is closely related to the distortion of the image. The difference in dose by location of the detector increased with respect to the center - pole, and decreased with the + pole. Tests using mobile radiation generators will require careful efforts by clinicians to position patients in the center of the detector for accurate diagnosis, and efforts will be made to level the angle between the mobile radiation generators and the detector.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.27-30
• /
• 2005

In this paper, we designed and manufactured the distortion cancellation module which is able to compensate thermal-noise distortion by software The distortion cancellation algorithm not only bring forth system non-linear distortion by input level but also bring compensate component of distortion by thermal to get rid off distortion from now on. After TMS320C6711 DSP to recognize our algorithm, we manufactured the module for every kinds of system To evaluate efficiency of the distortion cancellation module, we designed and manufactured communication system. By measured result, if system output power is -3dBm equally, 12dB of ACLR has improved in 1MHz away from a center frequency, and also gain has increased up to 0.5dB.