• 한국통신학회논문지
• /
• 제25권4A호
• /
• pp.481-488
• /
• 2000

The demands for mobile communication service are growing rapidly. In heavily populated areas, cell split is unavoidable to increase the capacity of the cellular system. Cell splitting makes a cellular system to have mixed cell sizes. For cell planning, it is necessary to analyze the reverse link capacity of a CDMA cellular system with mixed cell sizes. In this paper, we propose a method to calculate the reverse link capacity of a CDMA cellular system with mixed cell sizes. When a macro cell is split into three micro cells, as an example, we calculate the reverse link capacities for the three micro cells and the neighboring macro cells. The results show that as the radius of a micro cell decreases, the reverse link capacity of the micro cell increases, while those of the neighboring macro cells decrease.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.562-564
• /
• 2002

Noise reduction and a simplification of a precision measurement system has been performed by changing analog output mode of a load cell into digital output mode. Usually, analog output signal of a few $\mu V$ from a load cell are amplified by amp and acquired by A/D converter. If the distance from a load cell to a DAS(Data Acquisition System) increases, more noise signals are mixed. So, a microprocessor has been integrated into a load cell so that the amplification and A/D conversion of output signals could be done in close proximity to the lode cell for the reduction in mixing of noise. Obtained data from the load cell like this manner are transferred to a computer with digital values(of TTL level). To simplify the configuration of a multi-channel DAS, RS-485 communication system has used for data transfer.

• Current Photovoltaic Research
• /
• 제2권2호
• /
• pp.41-47
• /
• 2014

Extensive investigation on silicon based thin film reveals a wide range of film characteristics, from low optical gap to high optical gap, from amorphous to micro-crystalline silicon etc. Fabrication of single junction, tandem and triple junction solar cell with suitable materials, indicate that fabrication of solar cell of a relatively moderate efficiency is possible with a better light induced stability. Due to these investigations, various competing materials like wide band gap silicon carbide and silicon oxide, low band gap micro-crystalline silicon and silicon germanium etc were also prepared and applied to the solar cells. Such a multi-junction solar cell can be a technologically promising photo-voltaic device, as the external quantum efficiency of such a cell covers a wider spectral range.

• 센서학회지
• /
• 제26권3호
• /
• pp.173-178
• /
• 2017

In this paper, we newly developed an omnidirectional receiver for visible light communication (VLC). The omnidirectional receiver was composed of a flexible solar cell attached on a cylindrical surface with its axis in vertical direction. The solar cell surface was symmetrical and showed an almost uniform receiving pattern in a horizontal plane. The maximum difference in a receiving pattern was within 7% of its peak value in a horizontal plane. This configuration is very easy to fabricate and useful in constructing wireless sensor networks in which one receiver needs to detect multiple LED signals in different directions.

• Molecules and Cells
• /
• 제43권7호
• /
• pp.591-599
• /
• 2020

Complex cell-to-cell communication underlies the basic processes essential for homeostasis in the given tissue architecture. Obtaining quantitative gene-expression of cells in their native context has significantly advanced through single-cell RNA sequencing technologies along with mechanical and enzymatic tissue manipulation. This approach, however, is largely reliant on the physical dissociation of individual cells from the tissue, thus, resulting in a library with unaccounted positional information. To overcome this, positional information can be obtained by integrating imaging and positional barcoding. Collectively, spatial transcriptomics strategies provide tissue architecture-dependent as well as position-dependent cellular functions. This review discusses the current technologies for spatial transcriptomics ranging from the methods combining mechanical dissociation and single-cell RNA sequencing to computational spatial re-mapping.

• 한국통신학회논문지
• /
• 제39A권10호
• /
• pp.601-609
• /
• 2014

본 논문에서는 다중 셀 환경에서 단말 간 직접 통신 (D2D: Device-to-Device)에 적합한 자원 할당 방식을 제안한다. 제안한 방식은 셀 간 간섭을 해결하기 위해 D2D 통신을 위한 자원 그룹을 할당하고, 이러한 자원 정보를 이웃 셀과 공유하는 절차를 수행한다. 또한, 셀 간 간섭을 감소시키기 위해 D2D 통신 링크 간 파워 조절 기법을 제안한다. 시뮬레이션 결과에 의하면, 셀 간 협력 자원 할당 방식은 셀룰러 상향링크와 D2D 통신 링크의 평균 SINR (Signal-to-Noise Ratio)을 10 dB 이상 유지시킬 수 있는 반면, 셀 간 비협력 자원 할당 방식은 D2D 통신링크의 평균 SINR이 0 dB 까지 저하되었다. 또한, 제안한 방식은 셀 간 비협력 자원 할당 방식보다 셀 처리율을 8 % 향상시킬 수 있었다.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.1-5
• /
• 2020

The most important factor in enhancing the performance of an optical device is to minimize reflection and increasing transmittance of light for a broad wavelength range. The choice of appropriate coating material is crucial in decreasing reflection losses at the substrate. The purpose of this review is to highlight anti-reflection coating (ARC) materials that can be applied to silicon solar cell and glass substrate for minimizing reflection losses. The optical and electrical behavior of ARC on a substrate is highly dependent on thickness and refractive index (RI) of ARC films that are being deposited on it. The coating techniques and performance of single and multi-layered ARC films after coated on a substrate in a wide range of wavelength spectrum will be studied in the paper.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.105-117
• /
• 2015

본 논문에서는 PRC (polar-rectangular coordinate) 에 대한 2 tier 19 셀에 대해 고려해보고, BS 와 같은 셀 중앙으로 부터의 거리에 기반해 셀룰러 망의 셀 에지(edge) 성능을 제시한다. BS 들은 하향링크 다중 셀 시스템에서 ICI (intercell interference) 제거를 위한 자신들의 SINR (signal-to-interference-noise ratio) 을 개선하기 위해 셀 에지 user 와 협력하여 송신한다. 제안한 새로운 모델은 다중 셀 시스템의 MIMO DC sum rate 용량을 계산한다. 이 모델은 협력 하향 링크 다중 셀 시스템에서 셀 간 간섭을 제거해 셀 에지 user의 성능을 개선시킨다. 모의실험 결과 제안한 방법이 망 경로 지수에 최소 영향을 주어 셀 에지 SINR 관점에서 기존 방법들보다 좋은 성능을 보였다. 경로손실 지수가 3.6인 경우에는 reuse-1에 비해 reuse-3을 사용한 결과 셀 에지 SINR에서 대략 13 dB가 개선되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.333-334
• /
• 2008

With the role of cell phones in today's society as a digital personal assistant as well as the primary tool for personal communication, it is possible to imagine the involvement of cell phones in almost any type of crime. The progression of a criminal investigation can hinge on vital clues obtained from a cell phone. This paper will be concentrated on CDMA system phones and focus on the data extraction for cell phone forensics. Especially, the data acquisition method of JTAG interface access to memory chip will be covered.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.130-134
• /
• 2008

The increasing size of very large scale integration (VLSI) circuits, high transistor density, and popularity of low-power circuit and system design are making the minimization of power dissipation an important issue in VLSI design. Test Power dissipation is exceedingly high in scan based environments wherein scan chain transitions during the shift of test data further reflect into significant levels of circuit switching unnecessarily. Scan chain or cell modification lead to reduced dissipations of power. The ETC algorithm of previous work has weak points. Taking all of this into account, we therefore propose a new algorithm. Its name is RE_ETC. The proposed modifications in the scan chain consist of Exclusive-OR gate insertion and scan cell reordering, leading to significant power reductions with absolutely no area or performance penalty whatsoever. Experimental results confirm the considerable reductions in scan chain transitions. We show that modified scan cell has the improvement of test efficiency and power dissipations.