• 패션비즈니스
• /
• 제20권3호
• /
• pp.30-42
• /
• 2016

The objective of this study was to perform 3D solid modeling from 3D scanned surface images of cotton and silk in order to calculate the thermal heat transfer responses using numerical simulations. Continuing from the previous methodology, which provided 3D surface data for a fabric through optical measurements of the fabric microstructure, a simplified 3D solid model, containing a defined unit cell, pattern unit and fabric structure, was prepared. The loft method was used for 3D solid-model generation, and heat transfer calculations, made for the fabric, were then carried out using the 3D solid model. As a result, comprehensive protocols for 3D solid-model generation were established based on the optical measurements of real fabric samples. This method provides an effective means of using 3D information for building 3D models of actual fabrics and applying the model in numerical simulations. The developed process can be used as the basis for other analogous research areas to investigate the physical characteristics of any fabrics.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.2-5
• /
• 2011

This paper presents a numerical study on multiphase flows induced by wall adhesion The CSF(Continuum Surface Force} model is used for the calculation of the surface tension force and implemented in an in-house solution code(PowerCFD). The present method(code) employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with volume capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing As an application of the present method, the effects of wall adhesion are numerically simulated with the CSF model for a shallow pool of water located at the bottom of a cylindrical tank. Two different cases are computed, one in which the water wets the wall and one in which the water does not wet the wall. It is found that the present method simulates efficiently and accurately surface tension-dominant multiphase flows induced by wall adhesion.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.1-7
• /
• 2008

본 논문에서는 손실을 고려한 Metamaterial(MTM) 전송선의 단일 셀을 구성하고, 이 전송선에서 방사효과를 갖는 파라미터들의 실제 값을 구해본다. 그리고 이 단일 셀을 이용하여 분산 다이어그램을 그려, 여러 셀을 cascade로 연결하여 공진체로 사용하기 위한 조건들을 찾아낸다. 공진체로 사용할 시 종단을 단락 또는 개방을 하게 되는데, 각각의 경우에 따라 공진 주파수를 알아내기 위해 나타나는 입력 임피던스 혹은 입력 어드미턴스에 대해서 논의한다. 이를 이용하여 공진 체의 Quality Factor와 대역폭을 구하였으며, 공진 안테나의 입력 어드미턴스를 회로 시뮬레이션과 EM 시뮬레이션에서 비교하였다. 또한 단일 셀을 이용한 안테나를 설계하여, $0.05\lambda_0\times0.12\lambda_0$의 초소형 안테나로의 설계 시 방사효과 모델링이 어떤 영향을 미치는지 분석하였다.

• 한국전산구조공학회논문집
• /
• 제37권1호
• /
• pp.9-16
• /
• 2024

일반적으로 적합직교분해(proper orthogonal decomposition, POD) 기반의 침습적(intrusive) 차수축소모델(reduced order model, ROM)을 활용하면 구조 시스템의 전체 자유도를 크게 줄이고 외연적 시간 적분법에서 해의 안정성을 만족하는 임계 시간 간격을 증가시킬 수 있다. 따라서 본 연구에서는 POD-ROM을 활용하여 Voronoi-cell 격자 요소로 이산화된 구조 시스템의 축소와 이에 따른 외연적 시간 적분법의 임계 시간 간격 및 해석 정확도 변화를 살펴보았다. 또한 지진하중과 같은 불규칙한 하중 이력을 받는 구조물 응답 해석에 POD-ROM을 적용하였다. 해석 결과 ROM을 통해 해의 정확도를 충분히 확보하면서 연산 시간을 크게 단축할 수 있음을 확인하였다. 또한 POD-ROM과 VCLM의 연계 방안의 적절성을 확인하였다. 향후 해당 연구는 고정밀 대용량 동적 구조해석의 실용성을 높이고, 설계 변수에 따른 구조물 동적 거동의 실시간 예측을 위한 기반 연구로 활용될 수 있다.

• 한국통신학회논문지
• /
• 제24권10B호
• /
• pp.1852-1860
• /
• 1999

본 논문에서는 음성 패킷을 전송하기 위해 새로 제시되어 표준화된 AAL2의 성능을 이산 시간 시뮬레이션 모형(discrete-time simulation model)을 통해 분석하였다. 시뮬레이션의 입력 파라메터로는 AAL2 PDU를 만들기 위한 패킷 필 지연 시간(packet fill delay), 여러 AAL2 PDU로부터 ATM 셀을 만들기 위한 셀 생성 지연(guard time), 음성 트래픽의 특성을 정의하는 버스트 정도(burstness), 그리고 사용자 수(number of channels)로 하였으며 이 값의 변화에 따른 음성 패킷의 양종단 지연 시간 변이(end-to-end delay variation)을 계산하여 각각의 파라미터가 음성 패킷의 성능에 미치는 영향을 분석하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.125.2-125.2
• /
• 2010

In this paper, both theoretical and experimental investigations have been performed to examine the effects of key operating parameters on the cell performance of a DMFCs (i.e., methanol feed concentration and operating temperature). For experiment, the membrane electrode assemblies (MEAs) were prepared using a conventional MEA fabrication method based on a catalyst coated electrode (CCE) and tested under various cell temperatures and methanol feed concentrations. The polarization curve measurements were conducted using in-house-made $25cm^2$ MEAs. The voltage-current density data were collected under three different cell temperatures ($50^{\circ}C$, $60^{\circ}C$, and $70^{\circ}C$) and four different methanol feed concentrations (1 M, 2 M, 3 M, and 4 M). The experimental data indicate that the measured I-V curves are significantly altered, depending on these conditions. On the other hand, previously developed one-dimensional, two-phase DMFC model is simulated under the same operating conditions used in the experiments. The model predictions compare well with the experimental data over a wide range of these operating conditions, which demonstrates the validity and accuracy of the present DMFC model. Furthermore, both simulation and experimental results exhibit the strong influences of methanol and water crossover rates through the membrane on DMFC performance and I-V curve characteristics.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.68-76
• /
• 2013

In this study, a 3D numerical model was used to predict nonlinear wave forces on a cylindrical pile installed in a shallow water region. The model was based on solving the viscous and incompressible Navier-Stokes equations for a two-phase flow (water and air) model and the volume of fluid method for treating the free surface of water. A new application was developed based on the cut-cell method to allow easy installation of complicated obstacles (e.g., bottom geometry and cylindrical pile) in a computational domain. Free-surface elevation, water particle velocities, and inline wave forces were calculated, and the results show good agreement with experimental data obtained by the Danish Hydraulic Institute. The simulation results revealed that the proposed model can, without the use of empirical formulas (i.e., Morison equation) and additional wave analysis models, reliably predict non-linear wave forces on an offshore wind turbine foundation installed in a shallow water region.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.61-64
• /
• 1994

This paper describes the construction of an anisotropic three dimensional ventricular model based on the bidomain model. The cardiac artivation process in the normal cardiac cell and the myocardiac ischemic cell are simulated by the Huygen's principle. The depolarization process in the myocardial ischemia displays the delayed activation compared to the normal state. The repolarization process is simulated by the myocardial potential at the arbitrary ellapsed time after activation process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.502-503
• /
• 2008

The modelling of PEMFC(Proton Exchange Membrane Fuel Cell) has been studied in many kinds of methods. But there are some limitations in application of the developed models to analysis transient phenomena of power systems. The PSCAD/EMTDC is very popular simulation tool in power system areas. To analysis power systems interconnected to PEMFCs, the PSCAD/EMTDC model of the PEMFCs is needed. In this paper, we developed a PSCAD/EMTDC model of PEMFC based on electro-chemical characteristic equations of PEMFC. Also, we performed simulations using the developed model in the PSCAD/EMTDC program and tested appropriateness of the proposed the models. The simulations showed good results.

• 대한의용생체공학회:의공학회지
• /
• 제15권4호
• /
• pp.407-412
• /
• 1994

This paper describes the construction of an anisotropic three dimensional ventricular model based on the bidomain model. The cardiac activation process in the normal cardiac cell and the myocardial ischemic cell are simulated by the Huygen's principle. The depolarization process in the myocardial ischemia displays the delayed activation compared to the normal state. The repolarization process is simulated by the myocardial potential at the arbitrary ellapsed time after activation process. Using the potential data, the equivalent cardiac source at the arbitrary time can be computed. In conclusion, this simulation suggests the possibilities of the depolarization and the repolarization process in the normal and abnormal myocardiac cells.