• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1871-1884
• /
• 1997

This paper describes the design process of a 3-component load cell with a multiple parallel plate structure which may be used to measure transverse forces and twisting moment simultaneously. Also we have derived equations to predict the bending strains on the surface of the beams in the multiple parallel plate structure under transverse force or twisting moment. It reveals that the bending strains calculated from the derived equations are in good agreement with the results from finite element analysis and experiment. Also we have evaluated the rated output and interference error of each component, which can be efficiently used to design a 3-component load cell with a multiple parallel plate structure.

• 한국항해항만학회지
• /
• 제35권8호
• /
• pp.637-641
• /
• 2011

해양구조물 전력시스템은 독립형 전력체계를 구축하기 어렵다. 그러므로 해상용 전력시스템을 효과적으로 운영하기 위하여 연료전지 및 하이브리드 전력체계를 연동한 전력시스템을 구축하는 것이 중요하다. 본 연구에서는 연료전지 기반의 해양구조물용 전력체계 설계에 필요한 수소 발생 메카니즘, 사용 전력량 계산과정 등을 기초로 해상용 연료전지 기반의 전력체계를 설계하고, 설계된 전력 시스템을 LabVIEW 프로그램을 활용하여 시뮬레이션 및 분석하였으며, 이를 기반으로 해양구조물용 전력시스템 설계 방안을 제안하고자 한다.

• 한국표면공학회지
• /
• 제41권2호
• /
• pp.69-75
• /
• 2008

Electrochemical behaviors of surface modified and MC3T3-E1 cell cultured Ti-30Ta alloys have been investigated using various electrochemical methods. The Ti alloys containing Ta were melted by using a vacuum furnace and then homogenized for 6 hrs at $1000^{\circ}C$. MC3T3-E1 cell culture was performed with MC3T3-E1 mouse osteoblasts for 2 days. The microstructures and corrosion resistance were measured using FE-SEM, XRD, EIS and potentiodynamic test in artificial saliva solution at $36.5{\pm}1^{\circ}C$. Ti-Ta alloy showed the martensite structure of ${\alpha}+{\beta}$ phase and micro-structure was changed from lamellar structure to needle-like structure as Ta content increased. Corrosion resistance increased as Ta content increased. Corrosion resistance of cell cultured Ti-Ta alloy increased predominantly in compared with non cell cultured Ti- Ta alloy due to inhibition of the dissolution of metal ion by covered cell. $R_p$ value of MC3T3-E1 cell cultured Ti-40 Ta alloy showed $1.60{\times}10^6{\Omega}cm^2$ which was higher than those of other Ti alloy. Polarization resistance of cell-cultured Ti-Ta alloy increased in compared with non-cell cultured Ti alloy.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.1010-1017
• /
• 2011

The use of plated front contact for metallization of silicon solar cell may alternative technologies as a screen printed and silver paste contact. This technologies should allow the formation of contact with low contact resistivity a high line conductivity and also reduction of shading losses. A selective emitter structure with highly dopes regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing. When fabricated Ni/Cu plating metallization cell with a selective emitter structure, it has been shown that efficiencies of up to 18% have been achieved using this technology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.890-893
• /
• 2002

This study is focused to predict the behavior of Al foam with closed-cell structure during the 3 point bending test and the upsetting test according to aspect ratio. We calculated characters of aluminum foams with closed-cell structure and took the simulation. The effects on the aspect ratio of the cell was investigated parametrically. The analysis was carried out on two models, First, the bending test in elasticity of the rectangular beam, and Second, the upsetting test in plasticity of the circular cylinder. In the analysis, the deformation of the beam and the cylinder was influenced by the aspect ratio of the cell. Further, We assumed that the geometry of feared aluminum cell change the stress and strain in the test.

• 한국컴퓨터정보학회논문지
• /
• 제3권2호
• /
• pp.169-175
• /
• 1998

ATM스위치에서 셀을 전송하기 위한 버퍼방식으로 HOL 블록킹을 방지하는 공유다중버퍼 방식이 있다. 그러나, 이러한 방식에서도 셀 손실이 발생하여 스위치의 성능을 저하시킨다. 따라서, 본 논문에서는 기존의 비충돌 공유 다중 버퍼 구조에서 발생하는 셀 손실을 방지하는 방안을 제안하였다. 셀 손실을 방지하는 방안으로 한 슬롯 타임동안에 손실되는 셀을 다음 슬롯 타임에 전송할 수 있도록 특정한 임시메모리에 저장할 수 있는 구조를 사용하였다. 이러한 구조를 시뮬레이션을 통해 성능평가를 한 결과 셀 손실율과 처리율면에서 기존의 시스템보다 우수함을 검증하였다.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.826-832
• /
• 2007

Fully flexible cell preserves Hamiltonian in structure so that the symplectic time integrator is applicable to the equations of motion. In the direct formulation of fully flexible cell N-Sigma-T ensemble, a generalized leapfrog time integration (GLF) is applicable for fully flexible cell simulation, but the equations of motion by GLF has structure of implicit algorithm. In this paper, the time integration formula is derived for the fully flexible cell molecular dynamics simulation by using the splitting time integration. It separates flexible cell Hamiltonian into terms corresponding to each of Hamiltonian term. Thus the simple and completely explicit recursion formula was obtained. We compare the performance and the result of present splitting time integration with those of the implicit generalized leapfrog time integration.

• 한국식품저장유통학회지
• /
• 제1권2호
• /
• pp.107-116
• /
• 1994

This paper was carried out to Investigate changes in the activities of cell-degrading enzymes, cell wall components and cell structure of peach during maturation and storage for valuation of quality. The firmness of peach was decreased during maturation and storage, and was remarkably decreased in Daegubo than Yumyung. Polygalacturonase and $\beta$-galactosidase activities of peach were increased during maturation and storage, and were remarably increased in soft peach and in mature and soft peach, respectively. Contents of alcohol-insoluble substance, cell wall, and total and insoluble pectin of peach were decreased during maturation and storage, but cellulose and soluble pectin were increased. Intracellular space was enlarged during maturation and middle lamella was gradually degraded during maturation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.383-386
• /
• 2004

The one of important requisites for fabricating molecular electronic device is the single crystal direction of bottom substrate nowadays. [1,2]. We obtain the optimum SAM result when the Au crystal is <111> structure for Self-Assembled molecular. To get the <111> crystal Au, we generally repeat heating and cooling course after evaporating Au [3]. However, we can fabricate <111> crystal Av thin film except post treatment because we simultaneously evaporate and anneal using Effusion Cell. In this paper, we study on thin film growth of <111> crystal Au as bottom electrode which is essential for Self-Assembled molecular by Effusion Cell and analyze crystal structure, thickness, surface conductivity and so on as each process condition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권7호
• /
• pp.1815-1830
• /
• 2012

Existing R-tree that is based on a variety of outdoor-based techniques to manage moving objects have been investigated. Due to the different characteristics of the indoor and outdoor, it is difficult to management of moving object using existed methods in indoor setting. We propose a new index structure called ACII(adaptive Cell-based index for Indoor moving objects) for Indoor moving objects. ACII is Cell-based access structure adopting an overlapping technique. The ACII refines cells adaptively to handle indoor regional data, which may change its locations over time. The ACII consumed at most 30% of the space required by R-tree based methods, and achieved higher query performance compared with r-tree based methods.