• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.265-273
• /
• 2012

Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.118-129
• /
• 2010

A lower-threshold-voltage (LVth) SRAM cell with an elevated cell biasing scheme, which enables to reduce the random threshold-voltage (Vth) variation and to alleviate the stability-degradation caused by word-line (WL) and cell power line (VDDM) disturbed accesses in row and column directions, has been proposed. The random Vth variation (${\sigma}Vth$) is suppressed by the proposed LVth cell. As a result, the LVth cell reduces the variation of static noise margin (SNM) for the data retention, which enables to maintain a higher SNM over a larger memory size, compared with a conventionally being used higher Vth (HVth) cell. An elevated cell biasing scheme cancels the substantial trade-off relationship between SNM and the write margin (WRTM) in an SRAM cell. Obtained simulation results with a 45-nm CMOS technology model demonstrate that the proposed techniques allow sufficient stability margins to be maintained up to $6{\sigma}$ level with a 0.5-V data retention voltage and a 0.7-V logic bias voltage.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.96-110
• /
• 2024

Polymer electrolyte membrane fuel cells (PEMFCs) are green energy conversion devices, for which commercial markets have been established, owing to their application in fuel cell vehicles (FCVs). Development of cathode electrocatalysts, replacing commercial Pt/C, plays a crucial role in factors such as cost reduction, high performance, and durability in FCVs. PtNi octahedral catalysts are promising for oxygen reduction reactions owing to their significantly higher mass activity (10-15 times) than that of Pt/C; however, their application in membrane electrode assemblies (MEAs) is challenged by their low stability. To overcome this durability issue, various approaches, such as third-metal doping, composition control, halide treatment, formation of a Pt layer, annealing treatment, and size control, have been explored and have shown promising improvements in stability in rotating disk electrode (RDE) testing. In this review, we aimed to compare the features of each strategy in terms of enhancing stability by introducing a stability improvement factor for a direct and reasonable comparison. The limitations of each strategy for enhancing stability of PtNi octahedral are also described. This review can serve as a valuable guide for the development of strategies to enhance the durability of octahedral PtNi.

• KSBB Journal
• /
• 제22권4호
• /
• pp.185-190
• /
• 2007

Productivity of secreted recombinant protein depends largely on its stability in the extracellular environment with protease. Most hGM-CSF produced by transgenic tobacco cell cultures and secreted to the medium was confirmed to be rapidly degraded by protease in medium. To increase the productivity, therefore, various protein stabilizers such as gelling agents such as carrageenan and alginate, polymers, polyols, and amino acids have been tested. The stability of hGM-CSF in spent medium without cells was improved by the presence of gelling agents. However, the reason for the enhanced production by the addition of gelling agents may be due to the increased expression level and permeability rather than stability. The addition of DMSO inhibited the cell growth, but improved specific yield. The others were not effective for stability as well as hGM-CSF production.

• Current Photovoltaic Research
• /
• 제4권4호
• /
• pp.155-158
• /
• 2016

Long-term stability of dye-sensitized solar cell (DSSC) module is critical for the commercialization. We investigated the effect of sealing technology on the long-term stability of the $10cm{\times}11cm$ sized DSSC modules. We applied the concept of secondary sealing to the module and then performed several stability tests such as humidity cycle, 1 sun light soaking and outdoor stability tests. The enhanced stability was confirmed for the DSSC module employing optimized sealing materials and architectures.

• 한국해양바이오학회지
• /
• 제14권2호
• /
• pp.112-123
• /
• 2022

Photosynthetic bacteria (PSB) play an important role in water purification, and their application is beneficial for sustainable aquaculture. However, maintaining the microbial stability of PSB from subculturing to preservation is a challenging task. Since improvement in the microbial stability of PSB is a crucial parameter, optimized conditions for cell immobilization and lyophilization were investigated. In PSB immobilization, 0.1-M CaCl₂ was found to be the most effective divalent metal ion solution in terms of cost-effectiveness, resulting in beads with a 4-mm diameter and high loading (1.91×10⁹ CFU/mL) of viable cells. Maintenance of cell viability, external appearance, and color of PSB beads was best in 3.5% NaCl during storage. In lyophilization, the addition of skim milk (9%) and dextrose (2%) as cryoprotective additives allowed the highest cell viability. Over an 18-week shrimp breeding period, when optimally manufactured beads and lyophilized powder of PSB were applied to shrimp aquaculture water, NH⁴⁺, NO₃^-, and NO₂^- were more effectively removed by 55%, 100%, and 100%, respectively, compared to controls. Thus, microbial stability of PSB through optimized cell immobilization and lyophilization was successfully enhanced, enabling a wide application.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.369-376
• /
• 2022

In this study, the stability of an anion exchange membrane water electrolyzer (AEMWE) cell was evaluated in an on-off cycling operation with respect to an applied electric bias, i.e., a current density of 500 mA cm^-2, and an open circuit. The ohmic and polarization resistances of the system were monitored during operation (~800 h) using electrochemical impedance spectra. Specific consideration was given to the ohmic resistance of the cell, especially that of the membrane under on-off cycling conditions, by consistently feeding the cell with KOH solution. Owing to an excess feed solution, a momentary increase in the polarization resistance was observed immediately after the open-circuit. The excess feed solution was mostly recovered by subjecting the cell to the applied electric bias. Stability tests on the AEMWE cell under on-off cycling with continuous feeding even under an open circuit can guarantee long-term stability by avoiding an irreversible increase in ohmic and polarization resistances.

• 전기화학회지
• /
• 제19권2호
• /
• pp.45-49
• /
• 2016

양이온 교환막 연료전지 운전 중에 발생하는 하이드록시 라디칼에 의한 전해질 막의 산화분해를 효과적으로 방지하기 위해 유기물 라디칼냐��쳐를 도입하였다. 술폰화 폴리아릴렌에테르술폰 고분자를 이용하여 폴리페놀 화합물의 일종인 루틴을 도입하여 복합막을 제조하였고, 제조된 고분자 전해질 복합막은 함수율 및 이온전도도의 측정을 통하여 루틴이 전해질 막의 물리화학적 성질에 미치는 영향에 대해서 조사하였다. 실제 연료전지 운전과 유사한 조건을 구현할 수 있는 과산화수소 폭로 가속화 평가장치를 이용하여 전해질 복합막의 산화안정성을 평가하였다. 루틴을 함유한 고분자 전해질 복합막은 이온전도도가 유지되면서 산화안정성이 향상된 결과를 보여주었다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.98-101
• /
• 2012

I studied the stability of organic photovoltaic cells in terms of P3HT:PCBM-71 blend ratio as a function of storage time. I obtained the best cell performance by optimizing the blend ratio of electron donor and electron acceptor within the active layer. In this study, I found that the more the P3HT:PCBM ratio increases within the active layer, the more the cell efficiency decreases as the storage time increases. As a result, the best optimized blend ratio was the 1:0.6 ratio of P3HT:PCBM-71, and cell efficiency of the device with the 1:0.6 blend ratio was 4.49%. The device with the best cell efficiency showed good stability.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권1호
• /
• pp.39-63
• /
• 2019

In this paper, we study the effect of Cytotoxic T Lymphocyte (CTL) and antibody immune responses on the virus dynamics with both virus-to-cell and cell-to-cell transmissions. The infection rate is given by Holling type-II. We first show that the model is biologically acceptable by showing that the solutions of the model are nonnegative and bounded. We find the equilibria of the model and investigate their global stability analysis. We derive five threshold parameters which fully determine the existence and stability of the five equilibria of the model. The global stability of all equilibria of the model is proven using Lyapunov method and applying LaSalle's invariance principle. To support our theoretical results we have performed some numerical simulations for the model. The results show the CTL and antibody immune response can control the disease progression.