• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1395-1406
• /
• 2001

In order to cover a widespread service range, terrestrial/satellite-mixed network is being combined with terrestrial ATM network. This dissertation analyzes and investigates several previously existent CDV compensation methods in order to compensate CDV arising from interfacing satellite TDMA and ATM. Specifically to supplement the problems of timestamp and cell number counting methods, new Variable Timestamp method for CDV compensation is proposed. To evaluate the proposed method, MMPP(Markov Modulated Poisson Process), which can express VBR service very well, is selected as a cell input traffic model of terrestrial transmitting earth station. After several simulation, it is also confirmed that CDV compensation capability for VBR services is very superior to the cell number counting method. In this case, as the timestamp number Nts increases, CDV compensation capability increases, and the CDV distribution length is reduced.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2008

Recently, various researches have been studied on the predict method of land change according to its development. The Cellular Automata(CA) is one of the most popular methods in the urban growth modeling. The basis principle of CA is to repeat operations, which convert the current cell into new cell state by the transaction rule. It will minimize the loss of data by using Fuzzy-AHP and it can lead the flexible urban growth modeling. However, AHP would have a disadvantage to repeat the procedure of the collecting intentions until it derives the weight. Also, it is necessary for the simulation of CA to repeat the operations and the test of data accuracy should be accompanied. The purpose of this study is to predict the Busan city growth model and analyze it according to the automated test method by applying CA as well as Fuzzy-AHP. This study shall improve the difficulties caused by complexity and repetitiveness in the urban grow modeling. The practical modeling could be derived from the verification, and the derived modules could be applied to the similar case studies.

• Journal of Wetlands Research
• /
• v.6 no.3
• /
• pp.47-54
• /
• 2004

A hydraulically and hydrologically based estimation method of pollutant delivery load for water quality modeling is proposed. The proposed method works on grid basis and routes overland flows from one cell to the next following the maximum downslope directions. The method is able to consider spatially-varied data of source pollutant, topography, land slopes, soil characteristics, land use and aspects, which can be extracted from geographic information systems (GIS) and from digital elevation models (DEMs). Because of this feature, the proposed method can be expected to be used for evaluating the impacts of various practices on watershed management for water quality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.715-724
• /
• 1998

The FDTD(Finite-Difference Time-Domain) method is applied to analyze an unequal Wilkinson power divider. Unequal Wilkinson power divider has complex structures and the standard Yee Cell modeling method is not appropriate. In this paper, nonuniform gridding and subcell modeling are used to accurately analyze the characteristics of an unequal Wilkinson power divider. For comparison, the numerical results are presented with those from a commercial circuit simulator.

• IE interfaces
• /
• v.24 no.1
• /
• pp.15-23
• /
• 2011

This study considers paging schemes that can page some cells or only one cell within the location area to reduce paging cost by using PAs (Paging Agents) and compares their performances by using a new analytic method. There are three ways of paging schemes using PAs; BSPA (Base Staton Paging Agent), 2SPA (2-Step Paging Agent), LAPA (Location Area Paging Agent). This study proposes exact performance of BSPA and 2SPA using a new analytic method based on Markov chain modeling to find the most efficient paging scheme. Numerical results for various circumstances are presented by using proposed analytic method to select a proper paging scheme in mobile communication networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1629-1633
• /
• 2004

In this paper, we first implement the simulation environment to investigate the efficient control method of a Fuel Cell Electric Vehicle (FCEV) system with battery. The subsystems of a FCEV including the fuel cell system, the electric motor (including the power electronics) and the tansmission (reduction gear), and the auxiliary power source (battery) are mathematically fomulated and coded using the Matlab/Simulink software. Some examples are given to show the capabilities of the modeled system and d a basic control strategy is examined for the economic energy distribution between the fuel cell and the auxiliary power source. It is illustrated by simulations that the actual vehicle velocity follows the given desired velocity pattern while both SOC control and power distribution control are being performed.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.142-149
• /
• 1997

This study is intended to develop a Feature based modeler. It is difficult to integrate CAD and CAM/CAPP with information that is given only by a conventional CAD system. Therefore a lot of studies have concentrated on a Feature based CAD system. But conventional Feature based modelers have had limitation on providing sufficient information related to Feature interaction. If a Feature based modeler is to be used in assembly simulation, a new Feature-based modeling method needs to be developed. Also to support collision detection between parts, we have to handle Feature interaction systematically. Therefore we suggest Cell data structure which handles interaction of Features by volume. The volume created by Feature interaction is saved as a Cell. With the Cell structure we solve problems involved with Feature interaction. This study shows how the Cell data structure can manage Feature interaction and give enough information in assembly simulation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.61
• /
• pp.41-50
• /
• 2000

Cell formation(CF) Is to group parts with similar geometry, function, material and process into part families, and the corresponding machines into machine cells. Cell formation solutions often contain exceptional elements(EEs). Also, the following objective functions - minimizing the total costs of dealing with exceptional elements and maximizing total similarity coefficients between parts - have been used in CF modeling. Thus, multiobjective programming approach can be developed to model cell formation problems with two conflicting objective functions. This paper presents an effective cell formation method with fuzzy multiobjective nonlinear mixed-integer programming simultaneously to form machine cells and to minimize the cost of eliminating EEs.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.198-204
• /
• 2003

The bone fracture healing is simulated by using one of the complex system rules, named cellular automata method. It is assumed that each cell has property of Bone, Cartilage or Fibrous connective tissue. Nine local rules are adopted to change the property of each cell against the mechanical stimulus, which consists of the strain energy density, and the existence of bone in the surroundings. Two dimensional sheep metatarsal model is considered and the bone fracture healing is simulated. The simulation results agree well with those obtained by using fuzzy logic model and experimental data. The cellular automata method found to be one of the simulation methods to express the bone fracture healing. The cellular automata method is expected to be effective in representing biological phenomenon.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.121-128
• /
• 2005

Forest fire is expanded to large-scale forest fire based on topographic characteristics, particularly slope. This report addresses the currently available methods of calculation slope angle from a digital elevation model and develops a new method that circumvents a number of the shortcomings associated with other algorithms. The results of the comparison of five different slope angle calculation algorithms show that maximum uphill slope angle calculation is the proper method for the purpose of predicting forest fire hazard.