• Journal of Electrochemical Science and Technology
• /
• 제10권4호
• /
• pp.381-386
• /
• 2019

Zn-air battery uses oxygen from the air, and hence, air holes in it are kept open for cell operation. Therefore, loss of water by evaporation through the holes is inevitable. When the water is depleted, the battery ceases to operate. There are two water consumption routes in Zn-air batteries, namely, active path (electrolysis) and passive path (evaporation and corrosion). Water loss by the active path (electrolysis) is much faster than that by the passive path during the early stage of the cycles. The mass change by the active path slows after 10 h. In contrast, the passive path is largely constant, becoming the main mass loss path after 10 h. The active path contributes to two-thirds of the electrolyte consumption in 24 h of cell operation in 4.0 M KOH. Although water is an important component for the cell, water vapor does not influence the cell operation unless the water is nearly depleted. However, high oxygen concentration favors the discharge reaction at the cathode.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.405-408
• /
• 2006

광대역망에서 다양한 트래픽의 종류에 따른 셀 손실율과 셀 지연율의 요구사항을 만족시킬 수 있는 제어시스템의 설계는 매우 중요한 요소이다. 본 논문에서는 트래픽의 각 클래스 타입에 따라 셀 카운터와 윈도우 카운터를 이용한 우선순위 제어 기법을 제안하였다. 제안한 기법에서는 요구된 서비스의 질을 만족시키기 위해 셀 카운터와 윈도우 카운터의 비교에 의해 얻어진 셀 손실과 지연요소를 획득하여 우선순위 제어를 수행하였다. 그리고 컴퓨터 시뮬레이션을 통하여 성능을 평가하였다.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.9-17
• /
• 1994

ATM (Asynchronous Transfer Mode) has a fixed-length packet transport scheme. It is one of the promising proposals in B-ISDN.Since the packet length is fixed, it can be potentially to perform the various service to users. In this paper, a queueing model for an ATM multip`exer loaded by CBR and ON/OFF input sources is considered, and the two-queue system which each type of input sources has a queue with a finite capacity is analyzed. The cell loss probabilities for a performance measures of ATM multiplexer are derived, and are also evaluated through numerical examples. As a result, the cell loss probability of ON/OFF sources for the queue size is rapidly decreased when the multiplexed number and burstiness are increased. Since cells of the CBR source have lower priority than cells of the ON/OFF source, cell loss probabilities of CBR sources are accordingly high independently of CBR cell arrival rate when the number of CBR sources is large.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.139-142
• /
• 2009

In this study, the performance degradation of SOFC single cell caused by the delamination between a cathode and an electrolyte is investigated. As the delamination rate increases, the voltage sharply decreases due to the decrease of reaction sites and losses increase. The current is concentrated to the intact area so that the current density is increased and the ohmic loss and the activation loss become higher. Most part of loss is due to the ohmc loss of electrolyte.

• 한국컴퓨터정보학회논문지
• /
• 제6권3호
• /
• pp.44-49
• /
• 2001

일반적으로 ATM/WATM(Asynchronous Transfer Mode/wireless ATM)에서는 서비스의 종류에 따라 추구하는 사용자의 서비스 품질은 다르며 실시간 비디오 데이터 서비스는 셀의 손실보다는 셀 전송 지연에 더 민감한 서비스이다. 이러한 서비스를 하는데 있어서 셀 손실 방지를 위주로 한 기존의 핸드오프 방식으로는 전송 지연의 측면에서 사용자의서비스 품질을 만족하는데 한계가 있었다. 본 논문에서는 실시간 VBR(Variable Bit Rate) 서비스에서 핸드오프 시 Forwarding해야 할 셀들 중 ATM 셀 헤더의 CLP(Cell Loss Priority)가 높은 셀은 폐기하고 낮은 셀만을 전송하는 방식을 제안하였다. 제안한 방식은 핸드오프 요구사항인 신속한 핸드오프에 부합하며, MPEG 프레임 중 중요하지 않은 프레임에 높은 CLP를 부여함으로써 QoS(Quality of Service)를 만족함을 시뮬레이션을 통하여 입증하였다.

• 한국정보통신학회논문지
• /
• 제2권4호
• /
• pp.583-592
• /
• 1998

본 논문은 비동기 전송모드에서 중첩 입력하는 서로 다른 속도의 트래픽에 대한 데이타 처리를 셀의 손실 면에서 분석한 것이다. 멀티미디어 데이타를 대상으로 할 중첩 입력 프로세서의 트래픽 제어로서 사용감시제어를 대상으로 하였으며 Leaky-Bucket 알고리즘의 발생-소멸 프로세서를 이용 셀 손실률을 계산하였다. 해석결과는 버퍼용량의 증가에 대하여 셀 손실률이 현격하게 감소하는 결과를 보였으며 셀 손실률은 유한용량 버퍼에 대한 토큰풀의 특성을 고려하여 2-state MMPP(Markov Modulated Poisson Process) 입력 프로세서를 가정하였다. 해석 값을 검증하기 위해 SIMSCRIPT II.5를 사용하여 시뮬레이션을 하였으며 on/off 입력소스와 비교하였다.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.606-611
• /
• 2011

Power electronics is a key technology for electric, hybrid, plug-in hybrid, and fuel cell vehicles. Typical power electronics converters used in electric drive vehicles include dc/dc converters, inverters, and battery chargers. New semiconductor materials such as silicon carbide (SiC) and novel topologies such as the Z-source inverter (ZSI) have a great deal of potential to improve the overall performance of these vehicles. In this paper, a Z-source inverter for fuel cell vehicle application is examined under three different scenarios. 1. a ZSI with Si IGBT modules, 2. a ZSI with hybrid modules, Si IGBTs/SiC Schottky diodes, and 3. a ZSI with SiC MOSFETs/SiC Schottky diodes. Then, a comparison of the three scenarios is conducted. Conduction loss, switching loss, reverse recovery loss, and efficiency are considered for comparison. A conclusion is drawn that the SiC devices can improve the inverter and inverter-motor efficiency, and reduce the system size and cost due to the low loss properties of SiC devices. A comparison between a ZSI and traditional PWM inverters with SiC devices is also presented in this paper. Based on this comparison, the Z-source inverter produces the highest efficiency.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1015-1020
• /
• 2012

Resistance of the front electrode is the highest proportion of the ingredients of the series resistance in crystalline silicon solar cell. While resistance of the front electrode is decreased with larger area, it induces the optical loss, causing the conversion efficiency drop. Therefore the front electrode with high aspect ratio increasing its height and decreasing is necessary for high-efficiency solar cell in considering shadowing loss and resistance of front electrode. In this paper, we used the screen printing method to form high aspect ratio electrode by multiple printing. Screen printing is the straightforward technology to establish the electrodes in silicon solar cell fabrication. The several printed front electrodes with Ag paste on silicon wafer showed the significantly increased height and slightly widen finger. As a result, the resistance of the front electrode was decreased with multiple printing even if it slightly increased the shadowing loss. We showed the improved electrical characteristics for c-Si solar cell with repeatedly printed front electrode by 0.5%. It lays a foundation for high efficiency solar cell with high aspect ratio electrode using screen printing.

• 한국정보처리학회논문지
• /
• 제3권2호
• /
• pp.305-314
• /
• 1996

B-ISDN망은 ATM방식으로 멀티미디어 정보를 전송하고자 할 때, 발생될 수 있는 셀의 종류로써 미디어 정보를 갖고 있는 미디어셀과 동기 정보를 갖고 있는 동기셀로 각각 분리하였다. 트래픽 입력원을 NO-OFF 발생원으로 하는 Leaky Buck에서 확률 분포 함수를 기반으로 한 미디어셀 손실식과 동기셀 손실식을 유도하였다. 멀티미디어 동기셀은 종기 정보의 무결성과 실시간 요건을 만족시키기 위해서는 지연 민감 요건과 손실 민감 요건을 모두 갖추어야 한다. 이러한 요건을 만족 시키기 위해 우선 순위 제어 기법이 필요할 트래픽 모델링 시뮬레이션을 통해 성능 평가한 걸과, 동기셀 손실 효과 를 최소화할 수 있는 공간 우선 순위 제어 기법과 동기셀 지연 효과를 최소화할 수 있는 시간 우선 순위 제어 기법을 동시에 적용하여야 하는 필요성을 제시하였다.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.629-642
• /
• 1996

ATM switch handles the traffic for a wide range of appliations with different QOS(Quality-of-Service) requirements. In ATM switch, the priority control mechanism is needed to improve effectively the required QOS requirements. In this paper, we propose a priority control mechanism using the cell transfer ratio type and discard threshold in order to archive the cell loss probability requirement and the delay requirement of each service class. The service classes of our concern are the service class with high time priority(class 1) and the service class with high loss priority control mechanism, cells for two kind of service classes are stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the shole range of the buffer and cells for class 1 are allocated up to discard threshold of the buffer. In case cells in the buffer are transmitted, one cell for class 1 is transmitted whenever the maximum K cells for class 2 are transmitted consecutively. We analyze the time delay and the loss probability for each class of traffic using Markov chain. The results show that the characteristics of the mean cell delay about cells for class 1 becomes better and that of the cell loss probability about cells for class 2 becomes better by selecting properly discard threshold of the buffer and the cell transfer ratio according to the condition of input traffic.