• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.379-382
• /
• 2013

기존의 빛 에너지 하베스팅 회로에서는 MPPT(Maximum Power Point Tracking) 기능을 구현하기 위해 전력변환기(power converter)를 동작시키기 위한 클럭의 주파수나 듀티 싸이클(duty cycle)을 지속적으로 변화시키는 방법을 사용하고 있다. 본 논문에서는 전력변환기에 전력 공급을 위한 스위치의 듀티 싸이클을 제어하여 MPPT 기능을 구현하는 새로운 방법을 제안하였다. 제안된 회로는 0.35um CMOS 공정으로 설계 되었으며 칩 면적은 패드를 포함하여 $770um{\times}800um$이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.561-564
• /
• 2014

본 논문에서는 배터리 관리 기능을 갖는 빛 에너지 하베스팅 충전기 회로를 제안하였다. 제안된 회로는 MPPT(Maximum Power Point Tracking)를 통해 빛 에너지를 솔라 셀로부터 수확하고, 수확한 에너지를 외부 배터리 커패시터에 연결하여 충전한다. 배터리 관리회로(Battery Management)의 신호에 따라, 배터리 커패시터의 충전 상태를 조절한다. 제안된 회로는 0.35um CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 회로의 최대효율은 84.8%이며, 칩 면적은 패드를 포함하여 $1350um{\times}1200um$이다.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.386-391
• /
• 2021

The formation of CaCO₃ in microalgal culture is investigated and applied for effective separation of microalgae. The presence of several cationic ions in the culture medium mediates the formation of 3 types of mineral precipitates depending on the concentration of mineral precursors, Ca²⁺ and CO₃^2-, amorphous nano-flakes, rhombohedral calcites, and spherical vaterites. While amorphous phased precipitates are formed for all concentrations of mineral precursor, only calcites are formed for 30 mM solutions of mineral precursor, and mixtures of calcites and vaterites are formed for 50 and 100 mM solutions of mineral precursor. The harvesting efficiency is also dependent on the concentration of the mineral precursor: from 90 % for 10 mM to 99 % for 100 mM after 60 mins' of gravitational sedimentation. The formation of nano-flakes on the surface of microalgal cells induces the flocculation of microalgae by breaking the stable dispersion. The negatively charged surface of the microalgal cell is compatible not only with nano-flake attachment but also with the growth of calcitic crystals in which microalgal cells are embedded.

• 센서학회지
• /
• 제28권1호
• /
• pp.64-70
• /
• 2019

Wireless sensors have been developed in numerous ways for enhancing the convenience of installation, management and maintenance of sensors. Energy harvesting wireless sensors, which can collect energy from the external environment for permanent usage without the need of recharging and exchanging batteries, have been developed and employed used in Internet of Things and at various industrial sites. Energy harvesting wireless sensors are significantly affected by the sensor lifespan to sudden variation in the external environment. Furthermore, reduction in the sensor operating timespan can greatly affect the characteristics of the devices connected through a network. In this paper, a system performance index is proposed that can comprehensively evaluate the lifespan of a solar cell wireless sensor, determine the characteristics of devices connected to the associated network, and recommend dynamic power distribution control for improving the system performance index. Improvement in the system performance index was verified by applying the proposed dynamic power distribution control to an air conditioner network system using a solar cell wireless sensor. Obtained results corroborate that the dynamic power distribution control can extend the lifespan of the incorporated wireless sensor and reduce the air conditioner's power consumption.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1259-1264
• /
• 2010

This paper was researched about effectiveness of the electrochemical cell which is composed of the sea water and the Cu/Zn electrode. The electric potential difference between copper and zinc finally reached 0.51 volts. Short current decreased with time. It might depend on the electromotive force decreasing. Confirmed the load resistance and electrode affect in electromotive force and electric current. The resistance which shows a maximum output power was 20[$\Omega$], and the maximum output power from this resistance was evaluated as 0.736mW. In order to calculate the energy which creates from electrochemical cell, charging voltage of the capacitor with various capacitance was investigated. It was found that energy harvesting possibility of the cell which is made of a sea water electrolyte and the copper/the zinc.

• 한국수산과학회지
• /
• 제51권6호
• /
• pp.682-687
• /
• 2018

We investigated the effects of a highly saline solution (HS) containing hypochlorous acid, calcium chloride ($CaCl_2$), and phosphoric acid ($H_3PO_4$) on cell death and growth rate of laver Porphyra yezoensis and green laver Ulva intestinalis. Cell death rates of laver treated with HS and HS plus hypochlorous acid (HS + HOCl) in the harvesting stage were less than 0.5%, and there were no significant differences between the HS and HS + HOCl treatments. However, cell death of green laver treated with HS + HOCl in the harvesting stage was greater than 81.2%. These results indicate that the addition of HOCl is highly effective to eradicate noxious green laver without causing damage to laver. The addition of HOCl and $H_3PO_4$ to HS did not increase the area or weight of laver blades. A combination treatment of $CaCl_2$ and HS, however, significantly increased the area and weight of laver lades compared to controls (P<0.05).

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2019년도 제60차 하계학술대회논문집 27권2호
• /
• pp.159-160
• /
• 2019

일반적인 FOCV MPPT는 VOC와 VMPP와의 관계인 ${\alpha}$를 외부에서 지정해준다. 하지만 외부환경 (조도나 온도)에 따라서 태양전지의 ${\alpha}$값이 변화할 가능성이 있다. 본 논문에서는 저전력 IoT 센서의 구동을 위한 태양열 에너지 하베스팅을 위해 IV Curve를 이용한 태양전지 전력 계싼회로를 제안한다. IV Curve를 이용한 태양전지 전력을 직접 계산하여 FOCV MPPT를 개선함으로써 보다 높은 효율의 MPPT가 가능하고 외부환경의 변화에도 충분히 Maximum Power Point Tracking이 가능해지게 된다.

• ALGAE
• /
• 제39권2호
• /
• pp.109-127
• /
• 2024

High production and efficient harvesting of microalgae containing high omega-3 levels are critical concerns for industrial use. Aeration can elevate production of some microalgae by providing CO₂ and O₂. However, it may lower the production of others by generating shear stress, causing severe cell damage. The mixotrophic dinoflagellate Gymnodinium smaydae is a new, promising microalga for omega-3 fatty acid production owing to its high docosahexaenoic acid content, and determining optimal conditions and methods for high omega-3 fatty acid production and efficient harvest using G. smaydae is crucial for its commercial utilization. Therefore, to determine whether continuous aeration is required, we measured densities of G. smaydae and the dinoflagellate prey Heterocapsa rotundata in a 100-L semi-continuous cultivation system under no aeration and continuous aeration conditions daily for 9 days. Furthermore, to determine the optimal conditions for harvesting through centrifugation, different rotational speeds of the continuous centrifuge and different flow rates of the pump injecting G. smaydae + H. rotundata cells into the centrifuge were tested. Under continuous aeration, G. smaydae production gradually decreased; however, without aeration, the production remained stable. Harvesting efficiency and the dry weights of omega-3 fatty acids of G. smaydae + H. rotundata cells at a rotational speed of 16,000 rpm were significantly higher than those at 2,000-8,000 rpm. However, these parameters did not significantly differ at injection pump flow rates of 1.0-4.0 L min^-1. The results of the present study provide a basis for optimized production and harvest conditions for G. smaydae and other microalgae.

• 상하수도학회지
• /
• 제32권2호
• /
• pp.153-158
• /
• 2018

In this study, effects of nutrient and inorganic carbon on single cell emergence during the cultivation of microalgae were observed using colonial green algae, Pediastrum duplex. The concentration of inorganic carbon had significant effect on single cell emergence and its growth, but nitrogen and phosphorus concentration showed minor effects. According to P. duplex cultivation experiment, single cell started to be emerged around 500~750 mg-C/L of inorganic carbon concentration and it was bloomed dramatically at the higher values. And growth of P. duplex was started to be surpressed at the single cell formation concentration. From the results, it could be said that when we operate the microalgae systems for cultivation/harvesting or wastewater treatment, in order to avoid single cell formation, inorganic carbon should be maintained to the proper level.

• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.18-23
• /
• 2016

Cell walls of microalgae consist of a polysaccharide and glycoprotein matrix providing the cells with a formidable defense against its environment. Anaerobic digestion (AD) of microalgae is primarily inhibited by the chemical composition of their cell walls containing biopolymers able to resist bacterial degradation. Adoption of pre-treatments such as thermal, thermal hydrolysis, ultrasound and enzymatic hydrolysis have the potential to remove these inhibitory compounds and enhance biogas yields by degrading the cell wall, and releasing the intracellular algogenic organic matter (AOM). This paper preproposal stage investigated the effect of different pre-treatments on microalgae cell wall, and their impact on the quantity of soluble biomass released in the media and thus on the digestion process yields. This Paper present optimum approach to degradation of the cell wall by ultra-sonication with practical design specification parameter for ultrasound based pretreatment system. As a result of this paper presents, a microalgae system in a wastewater treatment flowsheet for residual nutrient uptake can be justified by processing the waste biomass for energy recovery. As a conclusion on this result, Low energy harvesting technologies and pre-treatment of the algal biomass are required to improve the overall energy balance of this integrated system.