• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1182-1185
• /
• 1995

This paper presents a novel technology for unattented continuous monitoring of radioactive material in hot cell environments. In this monitoring system, the surveillance camera data and NDA data are time synchronized and integrated into the same dimension through data processing. The integrated information is then fed into a neural network to generate diagnostics through data processing. the integrated information of the concept is tested for a spent nuclear fuel transprotation in an operational hot cell at KAERI. The presented integral part of the multi-sensory system and the analytical paradigm may provide an effective technologyical alternative for safeguarding new conceptual hot cell facilities, namely the Dupic facility.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.15-19
• /
• 2005

Three-dimensional structures of unsteady detonation wave propagating through a square-shaped tube is studied using computational method and parallel processing. Inviscid fluid dynamics equations coupled with variable-${\gamma}$ formulation and simplified one-step Arrhenius chemical reaction model were analysed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Results in three dimension show the two unsteady detonation wave propagating mode, the Rectangular and diagonal mode of detonation wave instabilities. Two different modes of instability showed the same cell length but different cell width and the geometric similarities in smoked-foil record.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• 한국가축번식학회지
• /
• 제4권1호
• /
• pp.13-19
• /
• 1980

This experiment was carried out to observe early morphological changes of luteal cells in Korean native cattle treated with prostaglandin F2$\alpha$. Twenty five gram of prostaglandin F2$\alpha$ was administrated per cow at 10 days after ovulation and luteal cells were removed 30, 60, 120 and 180 minites after administration. Morphological changes of each luteal cell was observed by electron microscope. the results obtained were summarized as followings: 1. Many electron-dense granules were observed in luteal cells obtained from control cow but those granules were decreased rapidly after 30 minutes of administration and no granules were obresved after 180 minutes of administration. 2. In control, the shape of mitochondria were begining to collapse from the time of 60 minutes after administration. After 180 minutes of administration, mitochondria were swelled extreamly. 3. Lipid droplets in luteal cell were increased in its size and number with the duration of time after administration. 4. Shape of smooth endoplasmic recticulum was vesicular and its dimension and number were increased according to time course after administration.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.467-472
• /
• 2008

Rigid polyurethane foams (RPUFs) were fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various isocyanate indices with a physical blowing agent (HFC 365mfc). There was a tendency for the gel time to decrease and the tack-free time to increase with increasing index value. With increasing index value the foam density and compression strength decreased and the glass transition temperature, dimension stability and thermal insulation increased, while the cell size and closed cell content were virtually unchanged. Allophanate crosslinks and condensation reactions between the isocyanate groups, which are favored with a high index value, exerted significant effects on the properties of RPUFs.

• 한국동물생명공학회지
• /
• 제37권1호
• /
• pp.62-66
• /
• 2022

To date, the development of anticancer drugs has been conducted using two-dimensional (2D) cell culture systems. However, since cancer cells in the body are generated and developed in three-dimensional (3D) microenvironments, the use of 2D anticancer drug screening can make it difficult to accurately evaluate the anticancer effects of drug candidates. Therefore, as a step towards developing a cancer cell-friendly 3D microenvironment based on a combination of vinylsulfone-functionalized polyethylene glycol (PEG-VS) with dicysteine-containing crosslinker peptides with an intervening matrix metalloproteinase (MMP)-specific cleavage site, the types of MMPs secreted from human hepatocarcinoma HepG2 cells, a representative cancer cell, were analyzed transcriptionally and translationally. MMP3 was confirmed to be the most highly expressed protease secreted by HepG2 cells. This knowledge will be important in the design of a crosslinker necessary for the construction of PEG-based hydrogels customized for the 3D culture of HepG2 cells.

• 대한전자공학회논문지SD
• /
• 제37권7호
• /
• pp.7-16
• /
• 2000

본 논문에서는 DRAM 셀 내의 셀 캐패시턴스 및 기생 캐패시턴스를 수치 해석적으로 계한하여 추출하는 방법과 그 적용 예를 보고한다. 셀 캐패시턴스 및 기생 캐패시턴스를 계산하기 위하여 유한요소법을 적용하였다. 시뮬레이션의 구조를 정의하기 우하여, 마스크 레이아웃 데이터 및 공정 레시피를 이용한 토포그래피 시뮬레이션을 수행하고, 토포그래피 시뮬레이션을 통해 DRAM 셀 구조를 생성하기 위해 필요한 데이터를 얻었다. 이를 기반으로 하여, 마스크 데이터 기반의 3차원 솔리드 모델링 방법을 적용하여 시뮬레이션 구조를 생성하였다. 시뮬레이션에 사용된 구조는 $2.25{\times}175{\times}3.45{\mu}m^3$ 크기이며, 4개의 셀 캐패시터를 갖는다. 또한 70,078개의 노드와 395,064개의 사면체로 구성되었다. 시뮬레이션을 위해 ULTRA SPARC 10 웨크스테이션에서 약 25분의 CPU 시간을 소요하였으며, 약 201메가바이트의 메모리를 사용하였다. 시뮬레이션을 통하여 계산된 셀 캐패시턴스는 셀당 24fF이며, DRAM 셀 내에서 가장 주요한 기생 캐패시턴스 성분을 규명하였다.

• 대한전자공학회논문지
• /
• 제22권1호
• /
• pp.68-74
• /
• 1985

이 논문에서는 standard cell의 layout을 위한 doglegging을 하지 않는 channel 배선 시스템에 대하여 서술할 것이다. 이 시스템은 주어진 net list specification을 만족시키기 위하여, 각각 standard cell 의 직선 배열 결합인 두 row 사이의 구평 track에서 이층의 최종 배선 패턴을 만들어 준다. 이 논문에서 사용한 CMOS cell library는 9개의 기본 cell을 가지고 있으며, Mead-Cogway 방식에서의 A-2micron을 사용하여 CIF(Caltech Intermediate From) 형태로 표현되었다. Component library에는 각 cell 내의 pin들의 이름. 위치 및 layer type 등의 입출력 port 특성이 저장되어서, CROUT라는 channel routing program에서 입력 자료로 사용된다. 또 다른 program NETPLOT은 routing 결과를 개략적으로 도시하여 주며, NETCIF에서는 최종의 자세한 layout을 CIF file로 만들어 주고 있다. 기본 cell을 이온하여 set/reset이 있는 dynamic Raster-slave형 D flip-flop에 대한 channel routing의 경우 VAX l1/780 에서 4초의 CPU 시간이 소요되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.804-808
• /
• 1991

In a transfer line with mass production capability, calibration systems are included in the process as a separate dedicated station. However, this method is not appropriate in an unattended FMC with flexibility. As the FMC produces vesatile parts with small batch sizes, more flexible calibration systems are required. In this paper, a calibration/inspection system suitable for an unattended turning cell is introduced. The system has functions of dimension calibration of parts by touch probes, tool wear compensation, and quality monitoring of parts. Furthermore, characteristics of errors in the system are identified and corresponding compensation methodology is suggested. An operation software was developed for efficient use of the system.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.126-134
• /
• 1998

Surface site and areas of particles are geometrically calculated for the cubic structures to investigate how the surface sites vary with the variation of morphology and particle size. The numbers of surface site and area become smaller when the particles become equi-dimensional shape. The ratios of surface site to surface area are almost constant except the case of anion of fluorite structure. The ratios of the number of surface site to area are almost constant regardless of particle size except the size of up to 5 to 10 times of the unit cell dimension. This quantification method can be used to obtain data related to the surface reaction.