• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.66-76
• /
• 2016

Determination of type of a vehicle is being used in various areas such as collecting tolls, collecting statistical traffic data and traffic prognosis. Because most of the vehicle type classification systems depend on vehicle length indirectly or directly, highly reliable automatic vehicle length measurement system is crucial for them. This study makes use of a pencil beam laser rangemeter and devises a mechanical device which rotates the laser rangemeter. The implemented system measures the range between a point and the laser rangemeter then indicates it as a spherical coordinate. We obtain several silhouettes of cross section of the vehicle, the rate of change of the silhouettes, signs of the rates then squares the rates to apply cell averaging constant false alarm rate (CA-CFAR) technique to find out where the border is between the vehicle and the background. Using the border and trigonometry, we calculated the length of the vehicle and confirmed that the calculated vehicle length is about 94% of actual length.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.5
• /
• pp.277-283
• /
• 2013

Purpose: Well vascularized pectoralis major myocutaneous flap (PMMF) had been a commonly used versatile flap in reconstructive oromaxillofacial surgery since the 1970s. However, after the advent of microvascular surgery in the 1980s, the PMMF was used less frequently. But, to date, PMMF has been useful and has some advantages such as covering wide defects, covering vital structures, back-up procedure in cases of free flap failure, and reconstruction for radiotherapy patients. The purpose of this study is to evaluate the role, indication, complications, functional, and aesthetic results of this flap in the era of free flap with a literature and chart review. Methods: A retrospective study was conducted of 16 oral cancer patients undergoing reconstructive surgery with PMMF for reconstruction of defects from 2001 to 2012 at Kyungpook National University Hospital. The male to female ratio was 10:6, with a mean age of 63 years (16~79 years). Basic demographic data, previous treatment history, indications, dimension of the flap, site of reconstruction, postoperative complications, and patients' final status were systemically analyzed from chart review. Results: The pathology of the disease included squamous cell carcinoma in the majority of cases (n=14). The remaining cases were fibrosarcoma and mucoepidermoid carcinoma. Of the 16 PMMF reconstructions, 13 flaps were applied as primary reconstructive procedures, whereas three flaps were; salvage; procedures (vascularized free flap failure). Twelve patients had complications such as wound dehiscence, infection, hematoma, fistula, flap bulkiness, and partial flap necrosis. The higher complication rates showed an association with utilization of the flap in preoperative radiotherapy cases. However, all patients were discharged without failure. Conclusion: In reconstructive oromaxillofacial surgery, the PMMF is still a useful flap for huge defects. In addition, the PMMF can be used as a salvage procedure after vascularized free flap failure and reconstruction for patients with a history of preoperative radiotherapy.

• The Journal of Internal Korean Medicine
• /
• v.39 no.1
• /
• pp.84-96
• /
• 2018

Objective: This is aprospective clinical case study that includes the administration of Ahnjeonbaekho-tang (AJBHT) to patients who have suffered from Graves' disease for the 8 weeks of the clinical research. Methods: Without administration of an antithyroid drug, AJBHT was administered 3 times a day for 8 weeks. In Case 1, AJBHT without modification was administered and in Case 2, in accordance with the patients' symptoms, a dose of Gypsum Fibrosum was increased by 4g from the beginning of week 2, and further increased by 16 g, for a total of 20 g between week 6 and week 8. Body mass index (BMI), thyroid function test (TFT), thyroid autoantibody test, complete blood cell count (CBC), and blood chemistry (BC) tests were conducted at an interval of 4 weeks, for a total of 3 times during the study. The clinical manifestations, a spectrum of symptoms of the patients, was observed by Wayne's Index, Euro-QOL-5 Dimension (EQ-5D), and Perceived Stress Scale (PSS). Results: In both cases, an acceptable significance of reduction of value in T3, fT4, Thyroid stimulating antibody (TSAb) and Thyroid stimulating hormone receptor antibody (TSH-R-Ab) was observed. After treatment, in TFT, T3 decreased by 31.66%, fT4 decreased by 32.82% in Case 1, and T3 decreased by 43.42%, and fT4 decreased by 37.32% in Case 2. In the thyroid autoantibody test, TSAb decreased by 7.59%, and TSH-R-Ab decreased by 53.19% in Case 1, and TSAb decreased by 33.45%, TSH-R-Ab decreased by at least 7.75% in Case 2. Besides this, there was a decreasing trend of Wayne's index, and a loss of typical symptoms of hyperthyroidism also declared the efficacy. Conclusion: From these results, AJBHT is very effective in the regulation of TFT and improving the symptoms of hyperthyroidism, and is also expected to be an effective alternative to antithyroid drugs for patients who have side effects or drug intolerance.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.34-41
• /
• 2013

Split-flow thin cell (SPLITT) fractionation (SF) is a rapid separation technique capable of separating colloidal particles or macromolecules into two or more fractions. SF allows fractionations in a preparative scale as sample is fed continuously. Generally SF uses a thin ribbon-like channel equipped with two flow stream splitters at the inlet and outlet of the channel. Thus there exist two flow inlets and two flow outlets at the top and bottom of the inlet and outlet of the channel, respectively. There are two operating modes in SF, conventional mode and full-feed mode (FFD). Although the resolution in the FFD mode is lower than that in the conventional mode, FFD mode has some merits. The design of the channel and operation are simpler in the FFD mode, as it does not require the feeding of the solvent. Thus there is no flow stream splitter at the channel inlet, and only one pump is needed, unlike the conventional mode, where two pumps are required for the feedings of the sample and the solvent separately. Also the sample is not diluted in the FFD mode as there is no solvent feeding, which is important for fractionation samples with low colloidal concentrations such as environmental samples. For some of environmental samples, pre-concentration is often required. In this study, a new large-scale splitter-less FFD-SF channel was implemented, where there is no splitter at the outlet as well as at the inlet of the channel. It was possible to build the channel in a much larger dimension than conventional ones, allowing much higher sample throughput (TP). The new channel was tested and optimized with polyurethane (PU) latex beads, and then applied to large-scale separation of Polyacrylate (PA).

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.451-455
• /
• 2006

An efficient pilot scale (10 ton) three-stage methane fermentation system to digest food waste has been developed in this laboratory. This system consisted of three stages: semianaerobic hydrolysis, anaerobic acidogenesis and strictly anaerobic methanogenesis. From the secondary acidogenesis reactor, a novel strain KA4 responsible for alcohol fermentation was isolated and characterized. The cell was oval and its dimension was $5.5-6.5{\times}3.5-4.5\;{\mu}m$. This strain was identified as Saccharomyces cerevisiae KA4 by 26S rDNA D1/D2 rDNA sequence. Optimal culture temperature was $30-35^{\circ}C$. Cells were tolerant to 5% (v/v) ethanol concentration, however, were inhibited significantly by higher ethanol concentration up to 7%. The strain could grow well up to 50% (w/v) initial glucose concentration in the YM liquid medium, however, optimal concentration for ethanol fermentation was 10%. It could produce ethanol in a broad initial pH range from 4 to 10, and optimal pH was 6. In this condition, the strain converted 10% glucose to 7.4% ethanol during 24 hr, and ethanol yield was estimated to be 2.87 moi EtOH/mol glucose.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.175-186
• /
• 2006

In the 21C, each nation controls exhaust fumes from automobiles and makes an effort to develop alternative energy because of serious environmental problem. Jechon area has many historical and cultural archeological sites. And Jechon city sponsors various cultural events. But the way of transportation which is connected with Jecheon and around sightseeing places is general and not ready yet. Therefore, if a special means of vehicle is developed, it could play an another role of sightseeing resources. Special identity of Jecheon area for establishment of green vehicle traffic system which gives Jecheon area specific character was investigated for theoretical background. Traffic system was studied for establishment of direction through existent successful case study. Moreover content, method, structure and advantage & shortcoming etc. of vehicle that use green energy resource such as solar car, fuel cell car, hybrid car, natural gas car etc. were examined. The suitable means of vehicle for Jechon area was proposed to three directions with research and investigation. After comparison and investigation by inquiry of each section's experts, the most suitable traffic system of which energy resource of car, form of vehicles, the complement, dimension of vehicles etc. were decided. Design proposal should be drawn according to process of automobile design in decided direction. Special Exterior design of vehicle that use green energy resource connecting Jecheon and around area should be suggested in Jecheon City Hall and Chungchong-bukdo provincial office for vivify image of cleanliness area.

• Journal of Embryo Transfer
• /
• v.32 no.4
• /
• pp.343-351
• /
• 2017

Porcine spermatogonial stem cells (SSCs) prefer three-dimensional (3D) culture systems to 2D ones for the maintenance of self-renewal. Of the many 3D culture systems, agar-based hydrogels are candidates for supporting porcine SSC self-renewal, and there are various types of agar powder that can be used. In this study, we sought to identify an agar-based 3D hydrogel system that exhibited strong efficacy in the maintenance of porcine SSC self-renewal. First, 3D hydrogels with different mechanics were prepared with various concentrations of Bacto agar, lysogeny broth (LB) agar, and agarose powder, and the 3D hydrogel with the strongest alkaline phosphatase (AP) activity and greatest increase in colony size was identified for the different types of agar powder. Second, among the porcine SSCs cultured in the different 3D hydrogels, we analyzed the colony formation, morphology, and size; AP activity; and transcription and translation of porcine SSC-related genes, and these were compared to determine the optimal 3D hydrogel system for the maintenance of porcine SSC self-renewal. We found that 0.6% (w/v) Bacto agar-, 1% (w/v) LB agar-, and 0.2% (w/v) agarose-based 3D hydrogels showed the strongest maintenance of AP activity and the most pronounced increase in colony size in the culture of porcine SSCs. Moreover, among these hydrogels, the strongest transcription and translation of porcine SSC-related genes and largest colony size were detected in porcine SSCs cultured in the 0.2% (w/v) agarose-based 3D hydrogel, whereas there were no significant differences in colony formation and morphology. These results demonstrate that the 0.2% (w/v) agarose-based 3D hydrogel can be effectively used for the maintenance of porcine SSC self-renewal.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.43-49
• /
• 2007

Anatomical properties of Kenaf (Hibiscus cannabinus L.) planted in a reclaimed-land of Korea were examined to understand the growth characteristics by an optical and scanning electron microscopy. The samples of kenaf were taken from four positions of the stem (3, 35, 70, 105 cm above from the ground) in four growth periods (July. August, September, October) from seeding planted in the middle of May. Bast fiber, phloem rays, cortex parenchyma cells and sieve tube members were observed in phloem, and vessel elements, fibers and rays in xylem. Solitary and multiple radial pores existed in xylem. The cell types of ray parenchyma in radial section were procumbent, upright, and square. The intervascular pitting showed an alternate type. Xylem proportion, the number of bast fibers and dimension of phloem rays increased with increasing growth period, and decreased with increasing stem height. The proportion of multiseriate rays was higher than that of uniseriate and biseriate rays in xylem with increasing growth period. On the other hand, The proportion of multiseriate rays was lower than that of uniseriate and biseriate rays in xylem with increasing stem height.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.2
• /
• pp.81-89
• /
• 1989

Alunite occurs as massive, cavity-filling and veinlets in the Cretaceous Hwangsan Formation in the Sungsan mine, Korea. It is a hydrothermal alteration product of rhyolitic tuffs, and associated with dickite, quartz and barite. The average chemical formula of alunite in the mine is $(K_{0.93}Na_{0.07})_{1.00}Al_{3.00}(SO_4)_{2.00}(OH)_6$. Atomic percentage of Na substituting for K in A site of the alunite structure varies from 5.9 to 9.2. Unit-cell volume and c dimension decrease with increasing Na atomic percentage. On the basis of thermal and high temperature XRD analyses, the decomposition of alunite into $KAl(SO_4)_2$ and $NaAl(SO_4)_2$ concomitant with the liberation of structural water (12.86%) occurs at about $550^{\circ}C$. The reconstruction of $KAl(SO_4)_2$ and $NaAl(SO_4)_2$ to $Al_2(SO_4)_3$, arcanite and thenardite, and the crystallization of ${\gamma}-Al_2O_3$ take place at about $720^{\circ}C$. The destruction of $Al_2(SO_4)_3$ structure takes place at about $760^{\circ}C$ removing 3/4 of total $SO_3$ (27.32%).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.154-159
• /
• 1983

A Gymnophallid cercaria was found in the gonadal tissue of Tapes philippinarum, and was described as a new species, Cercaria tapes n. sp. The host clams were collected from the intertidal zone of Seo-myon, Seo-chon gun, Korea from September 1980 to August 1981. The size of sporocysts was $380-650{\times}130-160{\mu}m$. The anterior part of the cercaria bears a subterminal opening and pharynx. The sporocyst bears ca. 30 cercariae and germ balls. The cercaria is elliptical in shape. The dimension of body is $160-187{\times}62-77{\mu}m$. the tail stem is $47-52{\times}17{\mu}m$, and the tail furcae is $67-72{\times}12-15{\mu}m$. Excretory bladder is Y-shaped, and the flame cell formula is 2(1)+(1)=4. The infection rate of the cercaria to the host clam was $2.01\%$ (42 infected/2,086 short-necked clams observed). The highest infection rate ($5.74\%$) was found in March, and the lowest one ($0.4\%$) observed in January. No infection was detected in May and June. The infection rates varied with the size of the short-necked clam. It was the clams of host of 2.1-3.0 cm, 3.1-4.0 cm and 4.1-5.0 cm in shell length are $0.38\%,\;15.3\%$ and $0.09\%$ respectively. The cercaria was not observed in the specimens smaller than 2.0 cm in shell length.