• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.406-414
• /
• 2004

In Gerotor pump, the pressure pulsations which occur due to the pump geometry result in vibration and noise of pump elements as well as cavitation in hydraulic system when the chambers of gerotor enter the delivery port and leave the suction port. Therefore it is important to study on the pressure pulsations before design and analysis of characteristics in Gerotor pump. In this paper, to reduce the unnecessary pressure pulsations, the port plate of Gerotor pump is designed based on the notch of the vane pumps and the relief grove of the piston pumps. The theoretical analysis of the pressure pulsations is performed in consideration of design parameters of the port plate which include each port positions and groove width and operating conditions which include rotational velocity and delivery pressure.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 1호
• /
• pp.461-464
• /
• 1998

수중 프로펠러의 비공동 소음을 수치적으로 해석하였다. Ffowcs Williams-Hawkings 형태의 음향상사 방정식을 시간영역에서 해석하였으며 임의의 형상과 하중조건을 가지는 프로펠러의 소음 예측이 가능하도록 하였다. 또한 좌표계 변환을 통해 관찰자에 대해 상대적 운동이 있는 경우에도 소음 예측이 가능하도록 하였다. 균일/비균일 유입류 조건을 갖는 수중 프로펠러에 대해 소음 해석을 수행하였고 각각의 조건에 대해 음원별 소음 강도와 방향성을 예측하였다. 수치 해석결과 프로펠러 표면상의 압력 변화에 따른 비정상 하중에 의한 이중극 소음이 지배적인 것으로 나타났다. 이러한 음원별 접근법은 수중 프로펠러의 운용시 지배적인 소음원을 구별하고 그 특성을 파악하여 적절한 소음 제어책을 마련하는 기반이 될 것이다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.269-270
• /
• 2006

A finite difference lattice Boltzmann model which allows us to simulate gas-liquid two-phase flows with large density difference, for instance, 800 times for air and water is considered. Two-particle model is used and the density difference is introduced by changing the acceleration according to the fluid density. Numerical measurement of surface tension agrees well with theoretical predictions. Simulations of two-phase phenomenon for phase-transition is carried out, showing applicability of the model for two-phase flows. The two-dimensional cavitating flow around a board set up in the fluid way is also simulated. As a result, it was confirmed that the FDLB method with two-particle model was effective in numerical simulation of cavitating flow and the bubble periodically grew up at the low pressure area behind the board, in which the fluid condition was influenced by the cavitation number.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권4호
• /
• pp.211-216
• /
• 2010

Recently a Wide Chord Tip (WCT) propeller has been developed and applied to a commercial ship by STX Offshore & Shipbuilding. It is reported that the WCT propeller significantly reduces pressure fluctuations and also ship's noise and vibration. On the sea trial, vibration magnitude in the accommodations at NCR was measured at 0.9mm/sec which is only 10% of international allowable magnitude of vibration (9mm/sec). In this paper, a design method for increasing performance of the marine propellers including the WCT propeller is suggested. It is described to maximize the performance of the propeller by adjusting expanded areas of the propeller blade. Results show that efficiency can be increased up to over 2% through the suggested design method.

• Journal of Mechanical Science and Technology
• /
• 제20권10호
• /
• pp.1626-1637
• /
• 2006

The pressure pulsation due to the gear geometry of the gerotor (generalized rotor) pump mainly occurs in an instant that the chamber of the gerotor enters the delivery port and leaves the suction one. Such a pressure pulsation may result in undesirable vibration and noise of pump components as well as cavitation in hydraulic system. Therefore, it is very important to examine the pressure characteristic of the gerotor pump at its design and analysis stages. In this paper, in order to reduce the pressure pulsation in the gerotor pump, the port plate with the relief grooves is designed by referring to as notch of vane pump and relief groove of piston pump. A series of the theoretical analyses on the pressure pulsation is performed in consideration of various design parameters of the port plate, including the installation positions of the port inlet/outlet and the groove width, and the operating conditions such as rotational velocity and delivery pressure.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.157-162
• /
• 2004

The cam curve of a balance type vane pump consists usually of circular arcs and Archimedes' spirals. However, if they are connected directly together, the curve must have a few discontinuous points of the gradients and the motion of the vanes is no longer smooth. Designing data for an oil hydraulic vane pump used in power steering system were obtained by the acquisition of optimum cam profile data which can be available to reduce noises and vibrations through the minimization of cavitation with the improvement of suctional performance. The performance test is carried on the trial manufactures by measuring the volumetric and the mechanical efficiency. And from that result, maintaining the same characteristic as the conventional one in the relief pressure and noise level, the experimental pump discharges 0.7 $\ell$/min and shows nearly 3.5% enhancement in the total efficiency more than the conventional one.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.448-453
• /
• 2016

선박의 프로펠러나 임펠러와 같은 유체기기에서는 캐비테이션 현상으로 인해 마모와 침식이 발생한다. 이와 같은 기기손상은 소음과 진동을 발생시켜 기기수명을 단축시키는 문제점을 가지고 있다. 본 연구에서는 캐비테이션 현상에 대한 저항성을 높이기 위해 산업 현장에서 많이 사용되고 있는 고속화염용사코팅의 공정 최적화에 따른 각 요소별 중요도를 분석하였다. 다구찌 실험계획법을 적용하여 ALBC3 모재 표면에 비정질 분말을 코팅하였고 기공도 실험을 통해 각 요소별 특성을 분석하였다. 다구찌 실험계획법에 의해 고속 화염용사(HVOF) 코팅의 최적 공정을 찾아낸 결과 연소압이 80 psi, 코팅거리가 270 mm, 이송속도가 200 mm/s, 분말속도는 25 g/min으로 확인되었고, 그 결과, 연소압, 코팅거리 및 분말속도는 25% 이상으로 비슷한 기여도를 나타냈고 이송속도는 19%로 다소 떨어지는 수준을 나타내었다. 공정에 대한 각 인자별 기여도는 약간의 차이는 있지만 그 차이가 크지 않으므로 네 개의 인자 모두 고속 화염용사(HVOF) 코팅 공정에서 중요한 기여를 하였다.

• 소음진동
• /
• 제5권3호
• /
• pp.303-311
• /
• 1995

Tests on flow-induced vibration of inclined cylinders in uniform flow were performed in the cavitation tunnel at the Korea Instituteof Machinery and Metals. The test program was intended to investigate flow-induced vibration characteristic of the cylinders with three different inclined angles of 10$^\circ$, 20$^\circ$ and 30$^\circ$ and to estimate the fluid force coefficients acting on the cylinders. Important observations are as follows: 1) Numal drag is dominant compared with viscous drag for the inclined angle over 20.deg. and it has the value from 1.7 to 2.0 as was observed by other researchers. 2) Lift force coefficient has large value at the lock-in range determined by 4$\Theta/f_nD$<8. Measured maximum lift force coefficients at the inclined angle of 30.$^\circ$ and 20$^\circ$ were 0.9 and 0.4 respectively.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.1-9
• /
• 2005

Waterjet propulsion is widely used to thrust high speed marine vessels in excess of 30-35 knots by virtue of the high propulsive efficiency, good maneuverability, and less cavitation. From the aspect of power loss, approximately $7-9\%$ of the total power is lost in intake duct due to the flow separation, nonuniformity, etc. Thus, detail understanding of flow phenomena occurring within intake duct is essential to reduce the power loss, as well as noise and vibration. The present work solved 30 incompressible RANS equations to provide complicated viscous flow features of intake duct. The numerical results were compared with experiments and good agreements were obtained for three jet velocity ratios.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권4호
• /
• pp.263-269
• /
• 2010

조류발전용 HAT 임펠러에 팁 레이크를 적용하여 임펠러 성능을 고찰해 보았다. 기존의 조류발전용 임펠러는 날개 끝 보오텍스에 의해 효율 감소로 인한 전력 손실 뿐 아니라 소음 및 진동에 의한 설치해역 주변의 해양 생태계 파괴의 우려가 있다. 임펠러 날개 끝에 레이크를 적용함으로써 효율의 개선과 함께 소음 및 진동 저감 효과를 파악하고자 하였다. 향후 레이크 비율에 따른 효율증가 및 캐비테이션 성능 향상에 대한 최적화를 수행할 계획이다.