References
- 강호근, 김유택, 이영호, 1997. '최적 노즐형상을 갖는 수중램제트의 추진성능에 관한 연구,' 대한조선학회 논문집, 제 34권, 제 4호. pp. 42-52
- 김경천, 박원규, 2003. 풍동을 이용한 워터제트 실험 보고서, 부산대학교
- 김기섭, 송인행, 안종우, 문일성, 1997. 'Pod형 물분사 추진장치 성능시험 연구.' 대한조선학회 논문집, 제 34권, 제 4호, pp. 21-30
- 류재문, 홍삼권, 김영기, 1999. '이차원 물분사 추진장치 입구면 형상에 관한 연구,' 대한조선학회 논문집, 제 36권, 제 2호, pp. 9-21
- 문일성, 이창섭, 송인행, 김기섭, 1997, '패널법에 의한 물 분사 추진장치의 성능해석,' 대한조선학회 논문집, 제 34권, 제 4호, pp. 31-41
- 안종우, 이창용, 박영하, 정종안, 김병현, 1998. '실선 물분사 추진장치 성능시험 및 모형선-실선 상관관계,' 대한조선학회 논문집, 제 35권, 제 4호, pp. 11-18
- 이진태, 문일성, 박영하, 김경열, 김기섭, 1999. '초고속선을 위한 공기유입 물제트 추진기 개발,' 대한조선학회 논문집, 제 36권, 제 3호, pp, 41-49
- 추재민, 2002, PIV 기법을 이용한 인위적인 대기경계층의 난류구조에 간한 연구, 부산대학교 공학석사 학위논문
- Alexander, K.V., Coop, H. and Terwisga. T., 1993, 'Waterjet-Hull Interaction: Recent Experimental Results,' SNAME Transactions. Vol. 102. pp. 275-335
- Brander, P.A. and Walker, G.J., 2001, 'A Waterjet Test Loop for the TOM FINK Cavitation Tunnel', RINA, International Conference on Waterjet Propulsion III, Paper NO. 1
- Okamoto, Y., Sugioka, H. and Kitamura, Y., 1993, 'On the Pressure Distribution of a Waterjet Intake Duct in Self Propulsion Conditions,' Proc. FAST'93. Vol. 1, Yokohama, Japan, pp. 843-854
- Roberts, J.L. and Walker, G.J., 1998, 'Boundary Layer Ingestion Effects in Flush Waterjet Intakes,' International Conference on Waterjet Propulsion II, RINA, Amsterdam, Netherlands
- Roberts, J.L, 1998, The Influence of Hull Boundary Layers on Waterjet Intake Performance, Ph.D. Thesis, University of Tasmania, Australia
- Seil, G.J., 2001, 'The Effects of the Shaft Rotation and Scale on the Flow in Waterjet Inlets', International Conference on Waterjet Propulsion III, RINA,Gothenborg, Sweden
- Verbeek, R. and Bulten, N.W.H., 2001, 'Interpretation of Model Scale Test Results with Aid of CFD Calculations,' International Conference on Waterjet Propulsion III, RINA, Gothenborg, Sweden
- Viecelli, J.A., 1969, 'A Method for Including Arbitrary External Boundaries in the MAC Incompressible Fluid Computing Technique,' Journal of Computational Physics, Vol. 4, pp. 543-551 https://doi.org/10.1016/0021-9991(69)90019-9
- Watson, S.J.P., 1998, 'The Use of CFD in Sensitivity 앉udies of Inlet Design,' Proceedings of International Conference on Waterjet Propulsion, International Conference on Waterjet Propulsion II, RINA, Amsterdam, Netherlands
Cited by
- Preparation of Yacht Sail Using High Tenacity Polyester and Its Performance Evaluation vol.24, pp.1, 2012, https://doi.org/10.5764/TCF.2012.24.1.54