• 한국조리학회지
• /
• 제11권4호
• /
• pp.150-163
• /
• 2005

If a licensed cook of a special-deluxe hotel restaurant and n family restaurant receives stress psychologically and physically, it will influence the interaction with customers who eat their food. Job stress is known to affect the kitchen operation and cause negative formation of interior and exterior customer management. This study wishes to present the method that can minimize the negative effect caused by stress, leading to an elevation of service quality that is offered to customers by removing those factors related to the stress of a licensed cook. This study established the range of targets to compare the cooks of super-deluxe hotel restaurants and those of family restaurants and to apply result of this research to whole licensed cooks is considered to have some limitations. Therefore, estimating job stress and turnover intention of general licensed cooks through comparison with tourist hotels and general restaurants should be significant hereafter.

• 기술혁신연구
• /
• 제14권1호
• /
• pp.101-118
• /
• 2006

The relationship between R&D Polices(R&D subsidy, tax incentives) and firm R&D expenditures is analyzed through firm's profit maximization function. As a result, the relationship between R&D policies and fmn R&D expenditures is determined by the relationship between firm R&D expenditures and market price. In case of major innovation which cause the fall of market price, the elasticity R&D subsidy and firm R&D expenditures is negative(substitution). In case of minor innovation which cause the rise of market price, the elasticity R&D subsidy and firm R&D expenditures is positive(complement). Tax incentives is bring about the increase of firm R&D expenditures. R&D subsidy and tax incentives are substitutively influenced at firm R&D expenditures.

• 대한전해질대사연구회지
• /
• 제16권2호
• /
• pp.27-29
• /
• 2018

Peritoneal dialysis (PD)-related peritonitis is a major cause of injury and technique failure in patients undergoing PD. Aeromonas hydrophila is ubiquitous in the environment, and is a Gram-negative rod associated with infections in fish and amphibians in most cases; however, it can also cause opportunistic infections in immunocompromised patients. We report a case of A. hydrophila peritonitis in a 56-year-old male on automated PD. Peritonitis may have been caused by contamination of the Set Plus, a component of the automated peritoneal dialysis device. Although Set Plus is disposable, the patient reused the product by cleansing with tap water. He was successfully treated with intraperitoneally-administered ceftazidime and has been well without recurrence for more than 2 years.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.27-28
• /
• 2008

For stable and sustainable energy supply, distributed generator (DG) has become an essential and indispensable element from environmental and energy security perspectives. However, installation of DG in distribution systems may cause negative affects on feeders because power outputs of DG could be changed irregularly. One of major negative affects is variation in voltage profile. In general, voltage regulation devices such as under load tap changer (ULTC) at distribution substation and step voltage regulator (SVR) along feeder in distribution system are used to maintain customers' receiving voltage within a predetermined range. These regulators are controlled by line drop compensation (LDC) method which calls for two parameters; the equivalent impedance and the load center voltage. Therefore, consideration of DG outputs in the LDC parameter design procedure may give large impact on the installable DG capacity. This paper proposes a method that estimates maximum Installable DG capacity considering LDC parameters of ULTC and SVR. The proposed algorithm is tested with model network.

• 드라이브 ㆍ 컨트롤
• /
• 제14권3호
• /
• pp.1-7
• /
• 2017

Energy consumption of conventional hydraulic excavators controlled by MCV is considerable when negative load is applied because the meter orifice and meter-out orifice are machined in one spool. Therefore, IMV is introduced to save energy use of hydraulic excavators, but existing hydraulic excavators have various advantages so it is difficult to make a clear comparison. In this study, we compare the use of an existing MCV excavator that has many advantages such as negative control, and IMV for boom up and down operation, and if IMV is used to save energy, we will examine the cause. If possible, for comparability under the same conditions, both systems use pressure balance valves to minimize power consumption when not using power in the actuator. The orifice area at each notch of each valve is calculated, and energy saving is verified by comparing the two systems through simulation.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1289-1295
• /
• 2012

An active resonance damper for a DC Distributed Power System(DPS) with parallel loads is presented. Each pulse power load in a DC DPS comprises both a resistive power load and a step-up converter. The step-up converter behave as constant power load(CPL) when tightly regulated and usually cause a negative impedance instability problem. Furthermore, when an input filter is connected to a large constant power load, the instability of DC bus voltage. In this paper, a bidirectional DC/DC converter with a reduced storage capacitor quantitatively are proposed as a active resonance damper, to mitigate the voltage instability on the bus. The validity of the proposed method was confirmed by simulation and experimental works.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.873-887
• /
• 2015

The continuous composite I-girder should have a sufficient rotation capacity (or ductility) to redistribute the negative bending moment into an adjacent positive bending moment region. However, it is generally known that the ductility of the high strength steel is smaller than that of conventional steel, and application of high strength steel can cause ductility problems in a negative moment region of the I-girder. In this study, moment redistribution of the continuous composite I-girder with high strength steel was studied, where high strength steel with yield stress of 690 MPa was considered (the ultimate stress of the steel was 800 MPa). The available and required rotation capacity of the continuous composite I-girder with high strength steel was firstly derived based on the stress-strain curve of high strength steel and plastic analysis, respectively. A large scale test and a series of non-linear finite element analysis for the continuous composite I-girder with high strength steel were then conducted to examine the effectiveness of proposed models and to investigate the effect of high strength steel on the inelastic behavior of the negative bending moment region of the continuous composite I-girder with high strength steel. Finally, it can be found that the proposed equations provided good estimation of the requited and available rotation capacity of the continuous composite I-girder with high strength steel.

• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.365-380
• /
• 2012

Non-negative matrix factorization (NMF) is a very efficient method to explain the relationship between functions for finding basis information of multivariate nonnegative data. The multiplicative update (MU) algorithm is a popular approach to solve the NMF problem, but it fails to approach a stationary point and has inner iteration and zero divisor. So the elementwisely alternating projected gradient (eAPG) algorithm was proposed to overcome the defects. In this paper, we use the fact that the equilibrium point is stable to prove the convergence of the eAPG algorithm. By using a classic model, the equilibrium point is obtained and the invariant sets are constructed to guarantee the integrity of the stability. Finally, the convergence conditions of the eAPG algorithm are obtained, which can accelerate the convergence. In addition, the conditions, which satisfy that the non-zero equilibrium point exists and is stable, can cause that the algorithm converges to different values. Both of them are confirmed in the experiments. And we give the mathematical proof that the eAPG algorithm can reach the appointed precision at the least iterations compared to the MU algorithm. Thus, we theoretically illustrate the advantages of the eAPG algorithm.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.34-46
• /
• 2020

Unlike research focused on existing technologies and individual errors to analyze the causes of incidents, this study approached them from an organization and culture. And this study is not a one way study but cyclical study what can track cause down using causal loop diagram methodology. Four diagnostic criteria for the negative state of the safety culture : secretive, blame, failure to learning, and incremental learning, combine literature study and expert opinion to derive 41 variables. Connecting these variable make 4 causal loop diagrams and total causal loop diagram. Case accumulation in secretive, accident report in blame, knowledge accumulation in failure to learning, near miss discovery in incremental learning are the main variables. Safety incident is the objective variable by classifying them into 4 stages in total loop, leading track as the most affect is case accumulation, and Step 4 as you can see accident report and near miss discovery are the result of tracking down the cause. This study can be used as a basis for improving the management priority and the system in incident prevention.

• 가정과삶의질연구
• /
• 제23권4호
• /
• pp.113-122
• /
• 2005

The purpose of this study is to examine the work-family conflict and work-family spillover of married working women. For this purpose, this study estimate the level of work-family conflict and spillover and investigate the related variables to then The results are as follows. The level of work-family conflict is ordinary. The level of role conflict as mother is highest and that of role conflict as wife is lowest. The level of work-family spillover is also ordinary and positive work-family spillover and family-work spillover are higher than negative ones. Work-family conflict of married working women have a significant difference according to woman's age, age of first child, number of children, household work time, career years, and support of family. Negative family-work spillover have similar trend with wok-family conflict in affecting variables. This study is meaningful in analyse the work-family spillover of married working women as well as work-family conflict to reveal the positive aspect with negative aspect of work-family. It is needed to eliminate the conditions which cause conflict to married working women and emphasize the positive effect of work-family.