• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.286-288
• /
• 2014

This study deals with the catalyst free radio frequency plasma assisted polymerization of ethylene glycol using nitrogen as reactive gas to modify the surface chemistry and morphology. The deposited film was characterized through various analysis techniques i.e. surface profilometry, Forier transform infrared spectroscopy, water contact angle and UV-visible spectroscopy to analyze film thickness, chemical structure, surface energy and optical properties respectively. The surface topography was analyzed by Atomic force microscopy. It was observed that the ethylene oxide behaviour and optical transmittance of the film were reduced with the introduction of nitrogen gas due to higher fragmentation of monomer. However the hydrophilic behavior of the film improved due to formation of new water loving functional groups suitable for biomedical applications.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.420-424
• /
• 2016

본 연구에서는 지속적으로 심각한 대기오염의 문제로 실내 공기청정의 중요성이 대두되는 점을 감안하여 광촉매 단위기술을 개발하고자 건식 박막 공정 중 일반적으로 사용되어지는 RF 마그네트론 스퍼터링을 이용하여 $WO_3$ 단층막을 증착하였다. 초기 진공도는 $1.8{\times}10^{-6}$ [Torr]를 기준하여 최적의 스퍼터링 공정조건인 RF 100[W], 7[mTorr]진공 조건에서 Ar:$O_2$ 반응가스의 비율을 70[sccm] : 2[sccm]으로 하여 제작된 $WO_3$ 단층막은 380[nm]-780[nm]의 가시광 영역에서 80% 이상의 높고 일정한 광투과 특성을 확인하였다. 공기 청정 효과를 확인 위해 제작된 $WO_3$ 박막의 광촉매 특성을 조사하기 위해 메틸렌블루 내에서의 흡광도 및 농도변화를 광조사 시간 변화에 따라 측정하였다. 그 흡광도 측정결과 시간에 따라 흡광도 특성이 보임을 확인하였고, 5시간 경과 후 기존 메틸렌블루 농도 대비 80% 수준의 농도로 낮아지는 것을 확인하였다. 이런 결과로 부터 스퍼터링법에 의해 제작된 기능성 $WO_3$박막의 광분해 특성을 통해 형광등의 반사갓 혹은 LED등의 렌즈에 활용 된다면 차세대 조명원의 공기청정 효과를 증진시킬 수 있는 박막을 개발하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.317-317
• /
• 2011

Water dissociation on oxide surface has been researched in many fields because of its importance as fundamental phenomenas. MgO(001) is a good model system to understand heterogeneous catalysis, gas sensors, ground-water contaminants, and atmosphere chemistry. Over decades, ultrathin film of MgO on Ag(100) have attracted research activities thanks to its enhanced catalytic property. Correlation of the oxide and the metal, potential screening, charge fluctuation from interface reconstruction makes different energetics of hydroxylation of waters on film. We calculate the water-spliting energetics under the vacuum system.

• International Journal of Contents
• /
• 제9권4호
• /
• pp.78-85
• /
• 2013

Music functions as a catalyst for various emotional experiences. Among the numerous genres of music, film music has been reported to induce strong emotional responses. However, the effectiveness of film music in evoking different types of emotions and its relationship in terms of which musical elements contribute to listeners' perception of intended emotion have been rarely investigated. The purpose of this study was to examine the congruence between the intended emotion and the perceived emotion of listeners in film music listening and to identify musical characteristics of film music that correspond with specific types of emotion. Additionally, the study aimed to investigate possible relationships between participants' identification responses and personal musical experience. A total of 147 college students listened to twelve 15-second music excerpts and identified the perceived emotion during music listening. The results showed a high degree of congruence between the intended emotion in film music and the participants' perceived emotion. Existence of tonality and modality were found to play an important role in listeners' perception of intended emotion. The findings suggest that identification of perceived emotion in film music excerpts was congruent regardless of individual differences. Specific music components that led to high congruence are further discussed.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.795-803
• /
• 1994

Ferroelectric BaTiO3 thin film was produced using BaTi-ethoxide sol. This sol was prepared from BaTi-ethoxide by a partial hydrolysis with ammonia as a basic catalyst and ethylene glycol as a chelating agent. BaTiO3 thin film was prepared from three continuous spin-coating layers of the sol on bare Si(100) wafer at 2500 rpm followed by pyrolysis at $700^{\circ}C$ for 30 min. After the heat treatment, the film was 0.200$\pm$0.010 ${\mu}{\textrm}{m}$ thick and its grain size was 0.059 ${\mu}{\textrm}{m}$. On the other hand, electrical properties were measured for BaTiO3 thin film separately prepared on Au-deposited silicon wafer. The dielectric constant and loss of the BaTiO3 thin film at room temperature was 150~160 and 0.04 respectively, which was measured at 10 kHz and oscillation level of 0.1 V. In the measurements of the dielectric properties at high temperatures, it was observed that the capacitance of the thin film increases steeply, while the dielectric loss reaches maximum around 1$25^{\circ}C$, which corresponds a phase transition from tetragonal to cubic BaTiO3.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.233-240
• /
• 2001

The transparent organic-inorganic hybrid films were prepared by the Sol-Gel process. PVP(polyvinylpyrrolidone) was used in organic component and TEOS(tetraethoxysilane) was used in inorganic component. HCI, $CH_{3}COOH$, and $NH_{4}OH$ were used as the Sol-Gel catalyst. The characteristics according to not only the variation of organic and inorganic contents but also the variation of catalyst species and contents were investigated. On the whole, the compatibility was remained between organic and inorganic components, and also as the TEOS contents were increased, mostly the transparency and the mechanical, thermal properties were improved. In addition, as content of catalysts was increased, the films showed characteristics that were closer to PVP than silica. Although the transparency of films was preserved in HCI and $CH_{3}COOH$, only the film containing more than 40wt% TEOS in $NH_{4}OH$ showed different phenomena.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.570-574
• /
• 1999

In this paper, by using the electrophoresis, preparation of YBCO superconducting wire deposited on metal Ag base wire was studied with its Properties. YBCO Powder could be prepared by solid state reactions with calcining and sintering processes. Superconducting wire prepared on metal Ag wire used as cathode of deposition base could be also fabricated in the YBCO/acetone-dispersed solution to obtain several tens of re thick films. And then it could be used as superconducting wire for measurement after calcination, sintering and oxygen absorption processes. In the process of film deposition, a catalyst I$_2$added into the suspension solution was very useful for preparing thick film of YBCO, and BaF$_2$ of additive material was also necessary for preparing crack-free wire of YBCO superconductor. As a result, YBCO superconducting wire added 2~3wt.% of BaF$_2$\ulcorner with catalyst, 12 had better deposition condition for uniform and dense YBCO wires, and critical current density, Jc was calculated at the value of 1,458A/$\textrm{cm}^2$(more than 10$^{3}$A/$\textrm{cm}^2$ ,77K, o[T]) of 30${\mu}{\textrm}{m}$ thick sample by 4 point prove method.

• 전기화학회지
• /
• 제4권4호
• /
• pp.172-175
• /
• 2001

마그네트론 스퍼터링 방법에 의하여 Nanophase 촉매층을 형성하여 Direct Methanol Fuel Cell(DMFC)에 적용하였다. 일반적인 박막 증착 방법보다 높은 압력 (Ar/He혼합기체)에서 금속 Target과 탄소 Target을 동시에 스퍼터링하여 내피온막 위에 직접 코팅함으로써 기공성 있는 PtRu혹은 Pt및 탄소입자를 포함한 새로운 구조의 촉매층을 형성하였다. 본 방법에 의하여 $1.5mg/cm^2$의 PtRu(Anode) 및 $1mg/cm^2$ Pt(Cathode) 로딩으로 2M Methanol, 1 Bar공기, $80^{\circ}C$조건에서 $45mW/cm^2$의 출력을 얻을 수 있었으며, 이는 기존의 상용방법에 의하여 제조된 전극보다 같은 조건에서 $30\%$의 성능향상을 제시한 것이다. 이는 Nanophase촉매층 구조로 인하여 초미세 분말을 적용하였고, 많은 량의 원자들이 입계에 배열하게 됨으로써 촉매반응을 원활하게 하고,연료의 공급을 효율적으로 해준 것에 기안한 것으로 판단된다. 그러므로, 본 연구의 결과를 응용할 경우 DMFC를 휴대용 전자기기에 적용함에 있어서 성능향상 및 가격경쟁력 확보에 도움을 줄 것으로 기대된다.

• 센서학회지
• /
• 제9권6호
• /
• pp.430-439
• /
• 2000

CO 가스 감지를 위한 두께 500-600 nm $In_2O_3$를 기저 물질로한 박막센서를 rf magnetron 방법을 이용하여 제작하였다. CO가스에 대한 감도 향상 및 -CH가 포함된 탄화수소 가스들과의 선택성을 높이기 위해 전이 금속인 Cobalt 촉매를 rf sputtering을 이용하여 초박막 형태로 0.7-2.8 nm 까지 두께를 조절하여 증착하고 $500^{\circ}C$ 열처리 후 가스 감도 특성을 조사하였다. CO에 대한 감도는 Co 두께 2.1 nm, 작동온도 $350^{\circ}C$에서 가장 우수하였고, $350^{\circ}C{\sim}400^{\circ}C$, Co (1.4 nm) 에서 $C_3H_8$에 대한 감도가 우수함을 알 수 있었다. 광전자 분석법 (x-ray photoelectron spectroscopy;XPS)을 통하여 초박막 Co가 표면이 $Co_2O_3$가 덮어진 CoO 형태로 존재함을 알 수 있었고, $(n-type)In_2O_3$-(p-type)CoO의 p-n junction 이 형성되었음을 확인하였다. 이러한 p-n junction type 가스센서에는 접합 경계면에서 형성된 전하 공핍층 (depletion layer)의 두께 변화에 따른 저항 변화에 의해 환원성 가스에 대한 감응 기구 (sensing mechanism)를 설명할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.245-248
• /
• 1991

Recently, oxide semiconductor gas sensors consisted of n-type semiconductor materials such as $SnO_2$, ZnO and $Fe_2O_3$ have been widely used to detect reducing gases. In this paper, we made the thick-film ZnO gas sensors with $PdCl_2$ as a catalyst and investigated the sensitivity to CO gas. In the thick-film Zno sensor, the highest sensitivity was shown in the sensor with 1wt.% of $PdCl_2$ which was sintered for 1 hour at $700^{\circ}C$ and operated at $300^{\circ}C$.