• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2943-2948
• /
• 2009

Copper-dimethylglyoxime complex (CuDMG) modified Copper electrode (Cu/CuDMG) showed a catalytic activity towards cyclohexanol oxidation in NaOH solution. The modified electrode prepared by the dimethylglyoxime anodic deposition on Cu electrode in the solution contained 0.20 M $NH_4Cl\;+\;NH_4OH\;(pH\;9.50)\;and\;1\;{\times}\;10^{-4}$ M dimethylglyoxime. The modified electrode conditioned by potential recycling in a potential range of -900${\sim}$900 mV vs. Ag/AgCl by cyclic voltammetry in alkaline medium (1 M NaOH). The results show that the CuDMG film on the electrode behaves as an efficient catalyst for the electro-oxidation of cyclohexanol in alkaline medium via Cu (III) species formed on the electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.206-208
• /
• 2002

A novel ozonizer has been developed using a high frequence surface discharge and a high purity ceramic as its dielectric component. And A cylindrical thin compound ceramic catalyst in reactor is adhered to inside of the film-like outside electrode. An ac exciting voltage with frequency to 0.6 kHz from 1.0 kHz and $4{\sim}6$ kV of peak-to-peak is applied between the electrodes to produce a stable high-frequency silent discharge for generation of ozone. A substantial reduction of the exciting voltage is also enabled by using a thin ceramic. As a result, the ozonizer can easily produce ozone concentration(50 $g/m^3$ for oxygen) and power efficiency(240 g/kWh for oxygen) without using a special enrichment means.

• 한국표면공학회지
• /
• 제45권5호
• /
• pp.193-197
• /
• 2012

The influence of annealing process in an $O_2$ atmosphere on the photoluminescence (PL) spectra properties of ZnS nanowires has been investigated. ZnS nanowires with the diameters approximately 100 nm and the lengths a few tens micrometers were synthesized by evaporating ZnS powders on Si substrates while using an Au thin film as a catalyst. ZnS nanowires had an NBE emission band at 430 nm in the violet region. The emission intensity was improved drastically by a process in which ZnS nanowires were heat-treated at $500^{\circ}C$ in an $O_2$ atmosphere for 45 minutes.

• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.289-292
• /
• 2009

Perchlorosilanes are useful precursors for the synthesis of hydrosilanes for the fabrication of electronic devices such as silicon thin-film transistors and silicon nanoparticles. For this solution process, requirements of precursors applicable to solution process are relatively low volatile and soluble in common organic solvents. In this work, the decaphenylcyclopentasilane has been obtained from the reaction of the lithium wire and dichlorodiphenylsilane. The reaction of decaphenylcyclopentasilane with lewis acid catalyst, HCl/$AlCl_3$, gives the perchlorocyclopentasilane. Decaphenylcyclopentasilane exhibits an unusual optical property. Its optical property was characterized by UV-vis and fluorescence spectroscopy. Absorption wavelength maxima for the decaphenylcyclopentasilane was 272 nm. Decaphenylcyclopentasilane displayed an emission band at 741 nm with excitation wavelength of 272 nm.

• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.91-98
• /
• 2009

The titania nanotubular layer for photocatalytic application was synthesized by anodization process in HF solution and the photocatalytic efficiencies of nanotubular film were evaluated by the decomposition rate of aniline blue. In order to facilitate the photocatalytic reaction, the electron acceptors such as potassium bromate, hydrogen peroxide and ammonium persulfate were added to aniline blue solution and the effects of electron acceptors on the dye degradation efficiency were evaluated. The results showed that the photocatalytic efficiency has markedly improved by adding the electron acceptors.

• 센서학회지
• /
• 제11권6호
• /
• pp.342-349
• /
• 2002

본 논문에서는 새로운 방식의 금속 산화물 감지막의 형성 기술에 대해서 제안을 하였다. Sn 증착을 위해 사용된 기판은 Pt 전극을 가진 실리콘 웨이퍼를 이용하였다. 증착 방식은 금속 Sn이 연속적인 막이 아닌 island로만 형성된 상태로 하였다. 제안된 방식의 최적의 Sn 증착 조건을 구하기위해 Pt 전극간의 저항이 $1\;k{\Omega}$, $5\;k{\Omega}$, $10\;k{\Omega}$ 및 $50\;k{\Omega}$이 되도록 Sn을 증착하여 시료를 제작하였다. 또한 일반적인 방식과 새롭게 제안된 방식의 시료를 비교하기 위해서 Sn 막의 두께가 $1,500\;{\AA}$인 시료를 준비하였다. 이것들을 $700^{\circ}C$의 산소분위기에서 3시간 동안 산화를 하여 $SnO_2$를 형성하였다. 산화물 감지막들의 특성 평가를 위해서 SEM, XRD 및 AFM을 이용하였다. 분석을 통하여 $10\;k{\Omega}$의 시료($300\;{\AA}$)가 최적의 감지막 증착 조건임을 알았다. 또한 제조된 감지막을 다양한 농도의 부탄, 프로판 및 일산화탄소에 대해서 동작온도 $250^{\circ}C$, $300^{\circ}C$ 및 $350^{\circ}C$의 경우에 대해서 측정하였다. 그 결과 촉매를 첨가하지 않았음에도 불구하고 모든 가스에 대한 높은 감도 특성을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1295-1300
• /
• 2010

The $CO_2-CH_4$ reaction catalyzed by Ni/silicon wafers was kinetically studied by using a photoacoustic technique. The catalytic reaction was performed at various partial pressures of $CO_2$ and $CH_4$ (50 Torr total pressure of $CO_2/CH_4/N_2$) in the temperature range of 500 - $650^{\circ}C$ in a static reactor system. The photoacoustic signal that varied with the $CO_2$ concentration during the catalytic reaction was recorded as a function of time. Under the reaction conditions, the $CO_2$ photoacoustic measurements showed the as-prepared Ni thin film sample to be inactive for the reaction, while the $CO_2/CH_4$ reactions carried out in the presence of the sample pre-treated in $H_2$ at $600^{\circ}C$ were associated with significant time-dependent changes in the $CO_2$ photoacoustic signal. The rate of $CO_2$ disappearance was measured from the $CO_2$ photoacoustic signal data in the early reaction period of 50 - 150 sec to obtain precise kinetic data. The apparent activation energy for $CO_2$ consumption was determined to be 6.9 kcal/mol from the $CO_2$ disappearance rates. The partial reaction orders, determined from the $CO_2$ disappearance rates measured at various $PCO{_2}'S$ and $PCH{_4}'S$ at $600^{\circ}C$, were determined to be 0.33 for $CH_4$ and 0.63 for $CO_2$, respectively. Kinetic data obtained in these measurements were compared with previous works and were discussed to construct a catalytic reaction mechanism for the $CO_2-CH_4$ reaction over Ni/silicon wafer at low pressures.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.342-349
• /
• 2009

This study investigated the growth characteristics of carbon nanotubes (CNTs) by changing a period of annealing time and a $C_{2}H_{2}/H_2$ flow ratio at temperature as low as $450^{\circ}C$ with inductively coupled plasma chemical vapor deposition. The 1-nm-thick Fe-Ni-Co alloy thin film served as a catalyst layer for the growth of CNTs, which was thermally evaporated on the 15-nm-thick Al underlayer deposited on the 50-nm-thick Ti diffusion barrier. The annealing at low temperature of $450^{\circ}C$ brought about almost no granulation of the catalyst layer, and the CNT growth was not affected by a period of annealing time. A study of changing the flow rate of $C_{2}H_{2}$ and $H_2$ showed that as the ratio of the $C_{2}H_{2}$ flow rate to the $H_2$ flow rate was lowered, the CNTs were grown to be longer With further decreasing the flow ratio, the length of CNTs reached the maximum and then became shorter. Under the optimized gas flow rates, we successfully synthesized CNTs with a uniform length over a 4-inch Si wafer at $450^{\circ}C$.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E3호
• /
• pp.121-127
• /
• 2003

The characteristics of heterogeneous photocatalytic decomposition were investigated at low concentration level of $O_3$on TiO$_2$for various operating parameters such as: loaded catalyst weight (0∼4 mg/$\textrm{cm}^2$), initial concentration of $O_3$(0.06∼10.0 ppm), gas flow rate (1.0 ∼ 2.5ι/min), and relative humidity (0∼80%). This study was conducted using a flow-type reactor at room temperature. Three kinds of pure TiO$_2$(P25, ST -01, and E- 23) were employed as photocatalyts. It was found that $O_3$removal ratio was identical, regardless of the loaded TiO$_2$weight in the range from 0.5 to 4.0 mg/$\textrm{cm}^2$. It was also found that higher initial ozone concentration results in greater oxidation rate of ozone and experimental data show kinetically a good agreement with Langmur-Hinshelwood kinetic model. We also observed that the removal ratio of $O_3$increases linearly with the increasing flow rate and also with the increasing relative humidity for each catalyst.