• Resources Recycling
• /
• v.9 no.2
• /
• pp.46-52
• /
• 2000

Aluminum can to can recycling was divided into two stpes. The first step was composed of the processes such as collection of used beverage cans (UBC), shredding, magnetic separation, De-laquiring, melting and casting. The second one was remelting and casting, heat treating, hot and cold rolling, annealing, and can making. In this study, the effect of alloying elements on the microstructure and texture of the secondary ingots made by Al UBC was investigated. In aluminum can to can recycling, the second phase particles appeared in the solidification stage must be controlled by heat treatment. The optimum heat treatment condition was $615^{\circ}C$ for 5hrs. the texture in hot rolled sheet was depressed with increasing Mn content, on the other hand, Si and Fe elements promoted the texture development. The textures of can-body sheet should be controlled in the hot rolling and annealing stage because can was formed from cold rolled sheet without heat treatment.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.31-37
• /
• 2002

Microstructure of aluminum alloys produced by the different mixing ratio of secondary ingot made by aluminum UBC (used beverage can) and virgin aluminum was investigated. The phase transitions of casted ingot by heat treatment were also studied. The alloys were melted at the electric resistance furnace, then casted using ceramic filter. Homogenization heat treatment was conducted at $615^{\circ}C$ for 10hrs to control cast microstructure. There were several kinds of phases, in as-cast condition, such as $\alpha$($Al_{12}$ $((Fe,Mn)_3$Si), $\beta$($Al_{6}$ (Fe,Mn)), and fine $Mg_2$Si phases. Especially, the amount of $\beta$-phase which was harmful in forming process was large. The $\beta$-Phase formed was transformed to u-phase by heat treatment. The fine $Mg_2$Si in the aluminum matix was also transformed to $\alpha$-phase by this heat treatment. Impurities filtered during casting process were identified as intermetallic compounds of Fe, Cu, Si.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.137-145
• /
• 2001

A new process, gelcasting in aqueous medium, to fabricate complex-shaped ceramic core has investigated. The ceramic slurry, mixture of fused silica powder and additives such as zircon and cordierite, was electrosterically stabilizes. The slip was prepared by ball milling of polydispered ceramic suspension with monomer, dimer and dispersant. The rheological behavior of slip was evaluated by viscosity measurement. It was found that the high solid loading of polydispersed ceramic slip, which has low viscosity of 50vol%, is possible to obtained. The viscosity of the slip was significantly dependent upon the amount of polymer dispersant and the formulation of monomer and dimer. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$ for 48hrs under relative humidity of 80~85%. Crack-free green body was successfully fabricated through the above process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.75-85
• /
• 2012

This study was investigated to develop an alternative medium for the cultivation of oyster mushrooms. The cultivation characteristics for major cultivated varieties of oyster mushrooms were campared with the food waste medium. In addition, water control & a gap formation of food waste is being pointed out as a problem of the medium material. Therefore, certain amounts of earthworm casting were supplied to the food waste medium to overcome the water and compaction phenomenon. This study investigated the use of the total 6 cultivars of oyster mushrooms, the Suhan(PL.1), Chiak No. 5(PL.2), Chiak No. 7(PL.3), Samgu No. 5(PL.4), Samgu No. 8(PL.5), Jangan No. 5(PL.6). In terms of medium, the optimum growth of the mycelium of the oyster mushroom was observed in the beet pulp medium but in food waste, the mycelium's growth was observed as insufficient in the bulk of cultivars. The Jangan No. 5(PL.6) was superior to other cultivars relative to the mycelium's growth. The optimum concentration of earthworm casting added the foodwaste medium was 30%. When Jangan No. 5(PL.6) was incubated in the foodwaste meidum containing 30% earthworm casting, the early days to germination were long, almost double the amount of time than that of the beet pulp medium. However, it was found that the fruit body size was larger than that of the beet pulp by up to 20.5%, and the length of the fruit body was up to 6.2% longer than that of the beet plup. The total yields increased by 60.5%. The analysis results of the oyster mushroom's nutritional contents cultured using the food waste medium, shows that the protein, vitamin A and vitamin E increased 70.6%, 2.4%, 0.8% respectively, the fat decreased by 12.6% and the oleic acid increased in a very small amount compared to that of the beet pulp medium.

• Cartoon and Animation Studies
• /
• s.20
• /
• pp.121-139
• /
• 2010

As a society gets digitalized, world of simulation will expand. The world of simulation is a forced, human-making world where we are going on our lives. It is power that dominates human beings. It is a main discourse producing forces. We are using violence to ourselves to escape this forcing phenomenon. Cindy Sherman is being paid attention as an artist who expresses physical human being in the world of simulation - human who desires something, is sacrificed by violence and is using violence to himself. She is casting a question about the violence of power in the world - who are you right now in the border between the real world and the fake one? - Her method is by various symbols: masks and makeup in her works, human desires and violent realities in symbolic packages. Only when we see the world as flesh, that is a specific body, not as separated organs, can this world be something we can feel. This world is something simulacre and at the same time is bearing violence in it. She sacrifices herself to violence to avoid the very violence. This behavior is to refine or avoid gigantic violence. She is saying that the others' pains, birth and death of flowers are not only theirs but also ours.

• The Korean Journal of Physiology and Pharmacology
• /
• v.22 no.4
• /
• pp.427-436
• /
• 2018

The objective of this study was to analyze the concurrent treatment effects of ursolic acid (UA) and low-intensity treadmill exercise and to confirm the effectiveness of UA as an exercise mimetic to safely improve muscle atrophy-related diseases using Sprague-Dawley (SD) rats with skeletal muscle atrophy. Significant muscle atrophy was induced in male SD rats through hind limb immobilization using casting for 10 days. The muscle atrophy-induced SD rats were group into four: SED, sedentary; UA, daily intraperitoneal UA injection, 5 mg/kg; EX, low-intensity (10-12 m/min, $0^{\circ}$ grade) treadmill exercise; and UEX, daily intraperitoneal UA injection, 5 mg/kg, and low-intensity (10-12 m/min, $0^{\circ}$ grade) treadmill exercise. After 8 weeks of treatment, endurance capacity was analyzed using a treadmill, and tissues were extracted for analysis of visceral fat mass, body weight, muscle mass, expression of muscle atrophy- and hypertrophy-related genes, and endurance capacity. Although the effects of body weight gain control, muscle mass increase, and endurance capacity improvement were inadequate in the UA group, significant results were confirmed in the UEX group. The UEX group had significantly reduced body weight and visceral fat, significantly improved mass of tibialis anterior and gastrocnemius muscles, and significantly decreased atrophy-related gene expression of MuRF1 and atrogin-1, but did not have significant change in hypertrophy-related gene expression of Akt and mTOR. The endurance capacity was significantly improved in the EX and UEX groups. These data suggest that concurrent treatment with low-intensity exercise and UA is effective for atrophy-related physical dysfunctions.

• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.331-335
• /
• 2021

The effects of drying temperature on the microstructure of porous W fabricated by the freeze-casting process of tert-butyl alcohol slurry with WO₃ powder was investigated. Green bodies were hydrogen-reduced at 800℃ for 1 h and sintered at 1000℃ for 6 h. X-ray diffraction analysis revealed that WO₃ powders were completely converted to W without any reaction phases by hydrogen reduction. The sintered body showed pores aligned in the direction of tert-butyl alcohol growth, and the porosity and pore size decreased as the amount of WO₃ increased from 5 to 10vol%. As the drying temperature of the frozen body increased from -25℃ to -10℃, the pore size and thickness of the struts increased. The change in microstructural characteristics based on the amount of powder added and the drying temperature was explained by the growth behavior of the freezing agent and the degree of rearrangement of the solid powder during the solidification of the slurry.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.46-53
• /
• 2003

In order to analyze the movement characteristics of suspended solid(SS) in harbor construction, we investigate the generation and movement processes of the SS for the landfill construction by direct casting method and the grab dredging construction which is the most frequent process in harbor construction. We find that the SS is generated into a very high concentration right after the direct casting of landfill soil and continued up to 60 minutes in the landfill construction using the direct casting method with dredged materials by a ship of 700-tonnage. In the grab dredging construction, the SS is generated in a high density of concentration near at its source regardless of water depth, formed belt and diffused up to 700m along the trajectory of tidal current. Based on the result of the present study, it is recommended for the mitigation of SS generation that the silt protector be deployed near at construction site close enough to block the diffusion of SS and the body length of silt protector be long enough to mitigate the SS diffusion in the bottom layer.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.102-121
• /
• 2010

Three bronze bells excavated from the Hoeamsa temple site were investigated for their microstructures and chemical compositions in an effort to understand the technology applied in fabrication, which may represent the related industry established in the early Joseon period. The result shows that the bells were cast from alloys of approximately 85% copper-8% tin-7% lead. The chemical analysis for ten trace elements shows that they were all kept below 0.3 weight %, suggesting that the alloys were made of relatively well-refined copper, tin and lead. The presence of sulfur and iron indicates that chalcopyrite or chalcocite may have been used in the smelting of copper. Evidence has been found that the bells were cast by pouring the liquid metal from the top of the sand molds that were set up in an upright position. No additional treatments, thermal or mechanical, other than a little grinding were applied upon the completion of casting. After the shaping process, a balancing plate was attached to the top of the bell using a steel connection ring. The connection assembly was then fixed to the main body by using molten bronze as a solder. The surface inscription was found carved using different techniques. The differences in the order of strokes and the calligraphic style indicate that the carving was carried out by more than one master. In the absence of documentary evidence on past bronze technology, the present bronze bells with known chronology, provenance and the main agent of production, prove to be a rare and valuable archaeological material for the understanding of the related technology in use in the early Joseon period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1303-1308
• /
• 2015

This study was conducted to investigate changes in blood enzyme parameters and to evaluate the relationship between insulin-like growth factor-1 (IGF-1), antler growth and body weight during the antler growth of sika deer (Cervus nippon). Serum enzyme activity and IGF-1 concentrations were measured in blood samples collected from the jugular and femoral veins at regular intervals during the antler growth period. Blood samples were taken in the morning from fasted stags (n = 12) which were healthy and showed no clinical signs of disease. Alfalfa was available ad libitum and concentrates were given at 1% of body weight to all stags. The experimental diet was provided at 9 am with water available at all times. There were no significant differences in alkaline phosphatase, aspartate aminotransferase, and alanine aminotransferase during antler growth, but alkaline phosphatase concentrations increased with antler growth progression, and the highest alkaline phosphatase concentration was obtained 55 days after antler casting. Serum IGF-1 concentrations measured from blood samples taken from the jugular vein during antler growth, determined that levels of IGF-1 was associated with body weight and antler growth patterns. Serum IGF-1 concentrations were higher at the antler cutting date than other sampling dates. Antler length increased significantly during antler growth (p<0.001), and there was a similar trend to between right and left beams. Body weight increased with antler growth but was not significant. Consequently it appeared that serum alkaline phosphatase concentration was related to antler growth and both antler growth and body weight were associated positively with IGF-1 concentrations during antler growth.