• Journal of Korean Association for Spatial Structures
• /
• v.7 no.6
• /
• pp.75-82
• /
• 2007

In this study, a design-supporting system, which is intended to assist engineers in the schematic phase of the structural design, is developed using a case database that contains design information of tall buildings in Korea. A case-based reasoning method utilizing the case database is proposed. The inductive retrieval module for selecting structural system, in the initial stage, from the design information of case database for 47 tall buildings is presented. Also, the nearest-neighbor retrieval method for selecting similar design cases is introduced.

• Journal of the Korean housing association
• /
• v.14 no.4
• /
• pp.21-29
• /
• 2003

The purpose of this study is to investigate alteration situation and user demand through the case study, to analyze the problems of the user participatory design, and to propose the improvement direction of user participation in the apartment housing. The results of this study are as follows: 1) The method of participatory design using a questionary must be improved with other communication methods between suppliers and users to adapt to the demands of users. 2) The range of menu and the time of participation must be varied to select various materials, colors, types of the interior finish and floor plan freely according to users. 3) Users have the positive attitude about the menu-option method and want to other methods of participatory design like the flexible housing method.

• Journal of the Korea Society for Simulation
• /
• v.13 no.2
• /
• pp.1-12
• /
• 2004

This paper estimated the arrival angle and electric wave delay time using the space method law and the directions of arrival (DOA) estimation algorithm in case of signal correlation. Space method law is the method used to repress cross correlation before applying the weight value to the receiving signal. The values of the diagonal elements in the correlation matrix were averaged to replace as the diagonal elements value. In the area of wireless communication or mobile communication, there are high correlations in case of low delay time difference in multiple waves. This causes the quality of the communication to drop due to interference with the desired signal elements. This paper estimated the arrival angle and electric wave delay time using the space method law and the MUSIC algorithm. With the arrival angle algorithm, the arrival angle cannot be estimated below 5 in case of signal correlations because the angle resolution capacity decreases accordingly. The super resolution capacity was estimated to determine the arrival angle below 5 in this paper. In addition, the proposed algorithm estimated the short delay time difference to be below 20ns.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2014

In this study, the methodologies for evaluating the low-flow at the ungauged watershed are reviewed and assessed. The ungauged watershed can be classified into different situations such as the partially recorded watershed and the completely ungauged watershed. The extension method and the percentile method are used to evaluated the low-flow at the partially recorded watershed. The drainage-area ratio method and the regional regression method are used at the completely ungauged watershed. These four methods are applied and validated based on the hydrological and geometric data acquired from unit watersheds in Han River basin for TMDLs. In case of partially recorded watershed, the values of low-flow evaluated by the extension method are in better agreement with measured flow-rate rather than those by the percentile method. In case of completely ungauged watershed, the drainage-area method is broadly used to estimate the low-flow. It must be paid attention to consider the treated sewage discharge produced at watersheds when applying the method.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.419-427
• /
• 2018

In case high strength steels are applied for press-formed automotive parts, it is very difficult to secure forming accuracy due to large springback compared to moderate strength steels. In this study, a repetitive step-wise forming analyses based on secant method was proposed as the die design method for mandrel(bending tool) for the 2-axis bending equipments. A bending die with circular mandrel was designed for the DP780 blow motor case of which diameter and thickness are 70.8mm and 2.0mm respectively. Forming tests were performed to verify the validity of established die design and the results were compared with that of conventional HGI(Hot galvanized iron steel) blow motor case. For additional improvement in forming accuracy, an elliptical mandrel was proposed and its validity was verified using forming analyses based on secant method.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.51-62
• /
• 2014

PURPOSES: This research is a basic study for application method in korea of energy harvesting technology, and it is a research to find out the direction of architectural planning through analyzing cases of interseasonal heat transfer system applied buildings. METHODS : In this paper authors investigate application necessity of energy harvesting technology, we analyzed energy use status of building section through analyzing domestic energy consumption status and analyzed domestic renewable energy generation potential. Also we study the features of energy harvesting technology, interseasonal heat transfer system, and case study on interseasonal heat transfer system applied buildings. RESULTS : On the basis of case study on interseasonal heat transfer system applied buildings, we analyzed feasibility study and classified into four sections(economic, environment, design, applicability), and suggested directions of architectural planning. CONCLUSIONS: Economic renewable energy for public and commercial buildings(hospitals, offices, schools, factories) can be provided effectively using Interseasonal Heat Transfer.

• Journal of Acupuncture Research
• /
• v.26 no.5
• /
• pp.117-125
• /
• 2009

Objectives : This study is to research the trend of the Moxibustion-related studies and to establish the hereafter direction for the study on Moxibustion. Methods : We reviewed the domestic articles published last ten years(2000~2009). Results : We have searched 45 articles in 4 journals of Korean Acupuncture & Moxibusion, Korean Oriental Medicine, Korean Meridian & Acupoint, Korean Oriental Internal Medicine. 1. There were the most research done 2003, 2008. Both of them have 8 articles. In other years there were 2 or more articles. 2. The pattern of study was as follow: the clinical studies were 23, studies of phisical Characteristics and new moxibustion method were 9, the philological study were 5, the reviewed studies were 3, the experimental studies were 2 and the others were 5. The rate of clinical studies was increased. 3. In the clinical studies, the case-control study and non case-control study were more than case study. The disease after stroke were the most predominant. The rates of direct moxibustion and indirect moxibusion were similar. 4. After beginning 2000s, there were more studies of thermodynamic Characteristics. In the mid 2000s, there were more studies of new moxibustion method appearing. Conclusions : We need more studies about various kinds of diseases, side effect and aftereffects. There should be convenient and useful methods of moxibustion.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.45-55
• /
• 2004

This study theoretically investigated the conceptional and technical aspect of participatory design as an approaching scheme for participatory design in community This study operated a case study in an senior hall which is expected to be the important institution for future aging society This study discussed the tool's potentialities after investigating technique's developments and usefulness. The main result of study is as follows 1) Conceptual approachment for participatory design in community starts with the attitude of designers establishing moral, philosophical and social sense of value as the mediator in city and region. And proceed the design in the method of mediating the opinion with the members of the community and the government. 2) The technical approachment should be more concentrated with the method of making the members interested and treat the rationalized process and proceedings more important. And develop this as a tool which Is easily understandable, more convenient when working, and has a adaptability in application. 3) The given technique in case study is produced with the data of demanded rooms, preferred image, priority, and room-layout game, and verified it's usefulness by analyzing and discussing of process and technique, and this technique can be useful after specific complement work as a result.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.197-202
• /
• 2012

Objective: The aim of this study is to introduce activities for job stress management in shipbuilding industry. Background: Recently, workers are exposed many job stress like workload, interpersonal conflict while management condition of company changes day by day. Particularly, shipbuilding industry has poor environment which aggravating the stress to the workers. So managing job stress may be more important. Method: The method of this study is to investigate preventive actions of job stress in "S" shipbuilding company. Results: This study through case of "S" shipbuilding company introduce activities of prevention of job stress including identification of level of job stress, managing of psychological clinic, training of worker and manager. Conclusion: In order to manage the job stress in the workplace, 1) The total management system based on the concern of the management in the workplace has to be constructed. 2) Computerized system for operation of total management system has to be constructed. 3) New employees need training for Job Stress. Application: Through this case study, I hope to help prevention activities of job stress in the workplace.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.95-100
• /
• 2017

Purpose: Now a day, Most of the residential house in Korea consists of apartment buildings. However, in the case of old apartment buildings, dwelling environment condition depends on management effort by residents. But we can't rebuild or restructure only old single dwelling unit in apartment buildings. And we can't move every single dwelling unit in the apartment building. Therefore, this study suggests a prototype of combinable container dwelling module apartment. Method: The method of research is exploring the case of previously constructed containers. Based on the case, This study suggests prototypes to create a variable apartment design with dwelling container units. Based on the prototype, various combinations are proposed to produce various types of dwelling space. Finally, this study makes an example plan for the apartment by using the container unit modules. Results: This study suggests combinable container apartment building prototypes. And it may be a fundamental study of changing the apartment building concept.