• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.305-312
• /
• 2011

The use of a separator to control stack temperature in a molten carbonate fuel cell was studied by numerical simulation using a computational fluid dynamics code. The stack model assumed steady-state and constant-load operation of a co-flow stack with an external reformer at atmospheric pressure. Representing a conventional cell type, separators with two flow paths, one each for the anode and cathode gas, were simulated under conditions in which the cathode gas was composed of either air and carbon dioxide (case I) or oxygen and carbon dioxide (case II). The results showed that the average cell potential in case II was higher than that in case I due to the higher partial pressures of oxygen and carbon dioxide in the cathode gas. This result indicates that the amount of heat released during the electrochemical reactions was less for case II than for case I under the same load. However, simulated results showed that the maximum stack temperature in case I was lower than that in case II due to a reduction in the total flow rate of the cathode gas. To control the stack temperature and retain a high cell potential, we proposed the use of a separator with three flow paths (case III); two flow paths for the electrodes and a path in the center of the separator for the flow of nitrogen for cooling. The simulated results for case III showed that the average cell potential was similar to that in case II, indicating that the amount of heat released in the stack was similar to that in case II, and that the maximum stack temperature was the lowest of the three cases due to the nitrogen gas flow in the center of the separator. In summary, the simulated results showed that the use of a separator with three flow paths enabled temperature control in a co-flow stack with an external reformer at atmospheric pressure.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.837-850
• /
• 2002

In an attempt to accelerate the development of formal reasoning ability of students, 'Thinking Science' activities developed by the Cognitive Acceleration through Science Education(CASE) project were implemented to 841 students in 7th grade aged 12+ in six middle schools over a period of two years. Homogeneity between the CASE group and control group was tested with SRT II, while the improvement of formal reasoning ability of the students was tested with SRT VII. The results were analyzed by treatment, gender, and cognitive levels of the students. Statistically significant gains were shown in the CASE group compared with those in the control group. Cognitive level of girls in the CASE group significantly increased as compared with the control group, while there was moderate effect in boys. These results implied that the thinking science activities were effective in cognitive acceleration of girls aged 12+. It was shown that much more CASE students in pre or concrete operational level shifted to formal operational level as compared with the control group while there were significant effects in all levels (ES=0.31${\sim}$1.10) without showing any tendency.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.1
• /
• pp.21-28
• /
• 2009

Role-Based Access Control Policy has a role hierarchies in which a higher case role can perform permissions of a lower case role. However, it is necessary for a lower case role to perform a higher case role's permission, which is not allowed to a lower case role, basically. In this paper propose a temporary permission delegation method. As the result of a temporary permission delegation, junior roles can perform senior roles' permissions in a dedicated interval.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.146-154
• /
• 2006

In this paper, we propose direct and indirect adaptive fuzzy sliding mode control approaches for a class of nonaffine nonlinear systems. In the direct case, we use the implicit function theory to prove the existence of an ideal implicit feedback linearization controller, and hence approximate it to attain the desired performances. In the indirect case, we exploit the linear structure of a Takagi-Sugeno fuzzy system with constant conclusion to establish an affine-in-control model, and therefore design an indirect adaptive fuzzy controller. In both cases, the adaptation laws of the adjustable parameters are deduced from the stability analysis, in the sense of Lyapunov, to get a more accurate approximation level. In addition to their robustness, the design of the proposed approaches does not require the upper bounds of both external disturbances and approximation errors. To show the efficiency of the proposed controllers, a simulation example is presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1069-1074
• /
• 1989

A discrete-time learning control for robotic manipulators is studied using its pulse transfer function. Firstly, discrete-time learning stability condition which is applicable to single-input two-outputs systems is derived. Secondly, stability of learning algorithm with position signal is studied. In this case, when sampling period is small, the algorithm is not stable because of an unstable zero of the system. Thirdly, stability of algorithm with position and velocity signals is studied. In this case, we can stabilize the learning control system which is unstable in learning with only position signal. Finally, simulation results on the trajectory control of robotic manipulators using the discrete-time learning control are shown. This simulation results agree well with the analytical ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.346-346
• /
• 2000

We proposed a method of second-order iterative learning control with feedback, which shows an enhancement of convergence speed and robustness to the disturbances in our previous study. In this paper, we show that the proposed second-order iterative learning control algorithm with feedback is more effective and has better convergence performance than the algorithm without feedback in the case of the existence of initial condition errors. And the convergence woof of the proposed algorithm in the case of the existence of initial condition error is given in detail, and the effectiveness of the Proposed algorithm is shown by simulation results.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.99-109
• /
• 2003

Attitude control law synthesis for the three-axis attitude maneuver of a flexible spacecraft model is presented in this study. The basic idea is motivated by previous works for the extension into a more general case. The new case includes gravitational gradient torque which has significant effect on a wide range of low earth orbit missions. As the first step, the fully nonlinear dynamic equations of motion are derived including gravitational gradient. The control law design based upon the Lyapunov approach is attempted. The Lyapunov function consists of a weighted combination of system kinetic and potential energy. Then, a set of stabilizing control law is derived from the basic Lyapunov stability theory. The new control law is therefore in a general form partially validating the previous work in some sense.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.5
• /
• pp.403-410
• /
• 2000

In order to investigate the possibility of lwo fat meat products, beef patties were prepared with gums such as carrageenan, methyl cellulose, and xanthangum. The quality characteristics of beef patties were examined. Moisture contents of raw and cooked patties of control were lower than those of patties containing gums, and fat content was higher than those of containing gums. There was no significant difference in the protein contents of patties. In case of L-value(lightness) of raw patty, the control was higher than those patties containing gums. a-(redness) and b-value(yellowness) among patties were not significantly different. Cooking yield, fat retention, and water holding capacity of beef patties containing gums were higher than control beef patty, but salt soluble protein and gel strength were not significantly different. Significant difference did not exist among beef patties in hardness, but the chewiness and gumminess of patties containing gums were higher than control. In case of sensory evaluation, there was no significant difference among patties in aroma and palatability. Texture of control was higher than patties containing gums, and juiciness of control was higher than patties containing carrageenan.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.364-367
• /
• 2008

Many different types of network equipments are deployed in a large-scale IP network. In this operating environment, network service providers suffer from difficulty in controlling various equipments simultaneously in case network faults happen in their overall or regional network due to physical link failure or abnormal traffic. This paper presents a policy-based methodology to control many different types of network equipments at the same time in abnormal cases. The key idea is that NMS(Network Management System) keeps vendor-neutral control policies in normal times and that when an abnormal case occurs in network, NMS transforms the selected policy into vendor-specific control commands and enforces them to various equipments simultaneously.

• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.58-66
• /
• 2004

The sway motion control problem of a container hanging on the trolly is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system in which a small auxiliary mass is installed on the spreader made by ourselves. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. Especially, we apply the $H_{\infty}$ based gain-scheduling control technique the anti-sway control system design problem of the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.