• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.714-717
• /
• 1996

This paper presents a fault detection and diagnosis methodologies based on weighted symptom model and pattern matching between the coming fault propagation trend and the simulated one. At the first step, backward chaining is used to find the possible cause candidates for the faults. The weighted symptom model(WSM) is used to generate those candidates. The weight is determined from dynamic simulation. Using WSMs, the methodology can generate the cause candidates and rank them according to the probability. Secondly, the fault propagation trends identified from the partial or complete sequence of measurements are compared to the standard fault propagation trends stored a priori. A pattern matching algorithm based on a number of triangular episodes is used to effectively match those trends. The standard trends have been generated using dynamic simulation and stored a priori. The proposed methodology has been illustrated using two case studies and showed satisfactory diagnostic resolution.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권5호
• /
• pp.199-204
• /
• 2000

This paper presents new approaches for the calculation for the calculation of each user's wheeling prices based on the economic analysis method with focus on the postage stamp rule. The suggested postage stamp rules can overcome the following problems embedded in the conventional accounting-costs-based methods such as the volatileness of wheeling prices depending deprieciation methods, emerging the wheeling free-riders due to the difference between accounting life-time and technical life-time, price discrimination between firm and non-firm network users, etc. To solve these problems we suggest new postage stamp rules employing capital recovery factor for investment costs treatment and applying technical life-time. Furthermore, we have suggested a new formulation for non-firm wheeling users based on the wheeling energies. In the case study, the results of suggested postage stamp methodologies are compared with those of conventional approaches.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.651-654
• /
• 2005

Ontology developing process has aroused a lot of controversy among knowledge engineers and knowledge users. The recent surges on ontology building methodologies and practical ontology applications have explored a broad spectrum of knowledge management challenges. On the one hand, the abundant methodology theories provide us with a set of useful heuristic rules, from which we get the overview of ontology building process. But on the other hand, every research groups would like to justify their theories by listing their specific characteristics and unique method when approaching the right way. However, there is still no one “correct” way or methodology for developing ontologies. In this case, the methods used to evaluate only a subset of specific domain do not make any sense to the commonsense users. As a result, a comprehensive understanding of domain ontology is urgent and necessary.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.572-577
• /
• 1996

Stereolithography is a process used to rapidly produce stereolithographic parts directly from three dimensional CAD models. However, design methodologies necessary to create components to be built by stereolithography are different from those required by conventional machining processes. A case in point is the nescessity of support structures, which are used to support a component during the building the build but are removed once building and curing are complete. Support structures are required to anchor the component to the platform and to prevent sagging or disortion. This paper deals with the specially maintained SupportMap data structure to find some region which need support structures. Interferences between support structures and parts, as well as among support structures are checked and statically stable regions are searched to remove the surplus support structures. Cross shaped tooth profiles are designed for easy eliminating the support structures.

• 시스템엔지니어링학술지
• /
• 제1권2호
• /
• pp.5-11
• /
• 2005

Ubiquitous computing is an emerging technic for various areas such as public, private (individual), military, industrial, medical sectors. The applications of ubiquitous computing are expected to be prevailed from home to office. Unfortunately, it is not effective to apply existing system/software development methodologies into this emerging ubiquitous computing applications. In this paper, MBASE (Model-Based system Architecting and Software Engineering) is applied as a development method of ubiquitous computing applications. The advantage of MBASE is to identify mismatches of product, process, property, and success models and resolve them in developing the ubiquitous computing applications. A SmartView, a ubiquitous computing application, is presented as a case study o f MBASE.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.379-391
• /
• 2015

Several risk assessment techniques have been presented and investigated in previous research, focusing mainly on the failure mode and effect analysis (FMEA). FMEA can be employed to determine where failures can occur within industrial systems and to assess the impact of such failures. This research proposes a novel methodology for hazard analysis and risk assessments that integrates FMEA with the bow-tie model. The proposed method has been applied and evaluated in a real industrial process, illustrating the effectiveness of the proposed method. Specifically, the bowtie diagram of the critical equipment in the adopted plant in the case study was built. Safety critical barriers are identified and each of these is assigned to industrial process with an individual responsible. The detection rating to the failure mode and the values of risk priority number (RPN) are calculated. The analysis shows the high values of RPN are 500 and 490 in this process. A global corrective actions are suggested to improve the RPN measure. Further managerial insights have been provided.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.801-820
• /
• 2015

The seismic sequence which hit the Northern Italian territory in 2012 produced extensive damage to reinforced concrete (RC) precast buildings typically adopted as industrial facilities. The considered damaged buildings are constituted by one-storey precast structures with RC columns connected to the ground by means of isolated socket foundations. The roof structural layout is composed of pre-stressed RC beams supporting pre-stressed RC floor elements, both designed as simply supported beams. The observed damage pattern, already highlighted in previous earthquakes, is mainly related to insufficient connection strength and ductility or to the absence of mechanical devices, being the connections designed neglecting seismic loads or neglecting displacement and rotation compatibility between adjacent elements. Following the vulnerabilities emerged in past seismic events, the paper investigates the seismic performance of industrial facilities typical of the Italian territory. The European building code seismic assessment methodologies are presented and discussed, as well as the retrofit interventions required to achieve an appropriate level of seismic capacity. The assessment procedure and retrofit solutions are applied to a selected case study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.627-628
• /
• 2007

Since Korea has more accident rate than advanced country, it causes very serious problems in national. In this paper electricity accidents of Korea are analyzed by using a new microscopic method, which is different from existing macroscopic methods. And enhanced methodologies for Korean safety system are designed conceptually by analyzing and comparing causes of electricity accidents with advanced countries based on how many accidents occur by case types and what specification these types have.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2005년도 공동추계학술대회
• /
• pp.147-156
• /
• 2005

In developing the ubiquitous computing technology based services (ubiquitous services), evaluating how much value of those services is created or added is very crucial. The efforts to evaluate the ubiquitous services have been progressed in two perspectives - technical perspective and behavioral perspective. Despite its importance, however, the methodologies which integrate both perspectives have been still very rare. Hence, this paper aims perspectives have been still very rare. Hence, this paper aims to propose an integrated ubiquitous service valuation methodology based on the multi-layered approach including technical and behavioral perspectives. To do so, we conducted a case study with currently existing location based service (LBS) such as navigation systems by conducting focus group interview (FGI) and field survey.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.292-294
• /
• 1998

It is very important for electric utility to expand generating facilities and transmission equipments in accordance with the increase of electricity demand. Regional electricity demand forecasting is among the most important step for long-term investment and power supply planning. The main objectives of this paper are to develop the methodologies for forecasting regional load demand. The Model consists of four models, regional economy, regional electricity energy demand, areal electricity energy demand. and areal peak load demand. This paper mainly suggests regional electricity energy demand model and areal peak load demand. A case study is also presented.