• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.29-33
• /
• 2010

The purpose of LiDAR ground classification is to archive both goals which are acquiring confident ground points with high precision and describing ground shape in detail. In spite of many studies about developing optimized algorithms to kick out this, it is very difficult to classify ground points and describing ground shape by airborne LiDAR data. Especially it is more difficult in a dense forested area like Korea. Principle misclassification was mainly caused by complex forest canopy hierarchy in Korea and relatively coarse LiDAR points density for ground classification. Unfortunately, a lot of LiDAR surveying performed in summer in South Korea. And by that reason, schematic LiDAR points distribution is very different from those of Europe. So, this study propose enhanced ground classification method considering Korean land cover characteristics. Firstly, this study designate highly confident candidated LiDAR points as a first ground points which is acquired by using big roller classification algorithm. Secondly, this study applied weighted gradient kernel(WGK) algorithm to find and include highly expected ground points from the remained candidate points. This study methods is very useful for reconstruct deformed terrain due to misclassification results by detecting and include important terrain model key points for describing ground shape at site. Especially in the case of deformed bank side of river area, this study showed highly enhanced classification and reconstruction results by using WGK algorithm.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.637-640
• /
• 2009

A 13-year-old female 30 kg Korean Jin-do dog was presented with severe defects due to vasculitis and perivascular dermatitis at the left antebrachium area. A left superficial brachial axial pattern flap was elevated to cover the defect and the wound was covered. However, one week post surgery, the flap was survived about 1/3 of total flap length. Remaining two thirds defects were performed by the free skin mesh graft as an additional method. After ten days, the entire wound was achieved completely. Skin flaps carry own blood supply in other hands, the flap method is dependent upon continuation of adequate circulation until vascularization takes place. Because they are much thicker than other grafts, this is a slower process and the flap method is vulnerable to problems with kinking or tension of the base. According to this case, a practician has to consider length of flap and thickness in order to vascular perfusion when superficial brachial axial pattern flap is performed in a dog.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2014

In this study, we propose optimized RBFNNs based on night vision face recognition simulator with the aid of $(2D)^2$ PCA algorithm. It is difficult to obtain the night image for performing face recognition due to low brightness in case of image acquired through CCD camera at night. For this reason, a night vision camera is used to get images at night. Ada-Boost algorithm is also used for the detection of face images on both face and non-face image area. And the minimization of distortion phenomenon of the images is carried out by using the histogram equalization. These high-dimensional images are reduced to low-dimensional images by using $(2D)^2$ PCA algorithm. Face recognition is performed through polynomial-based RBFNNs classifier, and the essential design parameters of the classifiers are optimized by means of Differential Evolution(DE). The performance evaluation of the optimized RBFNNs based on $(2D)^2$ PCA is carried out with the aid of night vision face recognition system and IC&CI Lab data.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.717-723
• /
• 2007

Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).

• Journal of The Korean Association For Science Education
• /
• v.33 no.2
• /
• pp.522-537
• /
• 2013

This study analyzed the relationship among the construct level of analogical reasoning, prediction and uncertainty, and the construction of an explanatory model that were produced during small group discussions for scientific problem solving. This study was participated in by 8 students of K University divided into 2 teams conducting scientific problem solving. The participants took part in discussions in groups after achieving scientific problem solving individually. Through individual interviews afterwards, changes in their thinking through discussion activities were looked into. The results are as follows: The analogy at the Entities/Attributes level was used to make people clearly understand the characteristics of certain objects or entities in the discussions. The analogy at the Configuration/Motion level that was produced during the discussions ensured other participants to predict the results of problem solving. The analogy at the Mechanism/Causation level changed the structure of problem situations either to help other participants to reconstruct the explanatory model or to come up with a new situation that was never been through before to justify the created mechanism and through this, the case of creating Thought Experiments during the discussions were observed. if looking into the changes of analogies, each individual's analogic paradigm during the discussions were shown as production paradigm, reception-production paradigm, production-reception paradigm, and reception paradigm. The construction and reconstruction of the explanatory model were shown in analogic production paradigm, and in the reception paradigm of an analogy, participants changed their predictions or their certainty.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.55-62
• /
• 2007

Radical paring of the cleft edge during primary cleft lip operation or repeated secondary surgeries can result in tightness of the upper lip. In case, the degree of the resulting side-to-side tension is very severe, the possibility of a lip switch flap must be considered. When the lip tightness accompanies a loss of more than two-thirds of the Cupid's bow, an Abbe flap is an alternative. The disadvantages of Abbe flap are scar formation on the lower lip, design of incision line on the upper lip, disharmony of colors, and the dysfunction of the orbicularis muscle. These problems have been recognized in the literature and extreme discretion has been advised in its application. We experienced four cases of Abbe flap operation which were designed differently to correct the secondary unilateral or bilateral cleft-lip nasal deformities. The Abbe flap operations resulted in removal of the scars and tightness of the upper lip, reconstruction of the Cupid's bow, lengthening of the columella, and therefore secondary cleft-lip nasal deformity could be corrected. It is thought that carefully applied Abbe flap is an appropriate method to relieve horizontal tightness or flattening of the upper lip which occured after primary operation of cleft lip.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.4
• /
• pp.380-385
• /
• 2008

Microstomia can be occurred as a result of direct injury to tissues such as chemical, thermal and electrical burns, and animal bites. It also may be secondary to contracture of burned perioral skin, or may result from scarring after reconstructive lip surgery. Narrowing of the oral aperture is not only disfiguring, but also limiting the oral access needed for introduction of food, insertion of dentures, oral hygiene, and dental treatment. Limited mouth opening may also interfere with mastication and speech. Few reports exist regarding correction of microstomia and reconstruction of the corners of the mouth. A 16-year-old girl with a bilateral cleft lip and palate presented with the limited mouth opening (approximately 20 mm), the esthetic problem due to the small lip, and the cleft lip-nasal deformity. The microstomia was corrected by bilateral commissuroplasty using "over and out" buccal mucosa flaps proposed by Converse. The intercommissure distance was increased from the preoperative 40 mm to the postoperative 60 mm. The one-year postoperative intercommissure distance was 54 mm, because the 6 mm relapse was occurred. The bilateral commissuroplasty using "over and out" buccal mucosa flap could increase the width and general size of the oral aperture and improve the lip appearance.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.343-350
• /
• 2020

In this paper, we present the results of research on the reconstruction of ancient routes of ancient civilization exchange that were once present in the North Jeolla region, which was undertaken by adopting a convergent approach to develop 'Silkroadpia', which is an online platform for the curation and sharing of archaeological and historical spatial data, and 'MEPTA(Multiple Evidence Based Path and Territory Finding Algorithm)'. The results of the research make it possible to reconsider the region's historical identity and its important role in facilitating cultural exchange on the Korean Peninsula and in East Asia. The results can also be used to provide the theoretical basis for the government's land planning policies and for the production of cultural contents that can be used for local regeneration. The ancient route associated with the Baekje Restoration Movement, that took place after the fall of Sabi in 660 CE, was the case study examined in this paper, which discusses the academic value of reconstructing the ancient route, as well as its future use in providing cultural contents.

• The Korean Journal of Quaternary Research
• /
• v.18 no.1 s.22
• /
• pp.31-39
• /
• 2004

The stable-unstable curve graph (S-U curve) and the ignition los curve graph (IL curve) for pollen composition and inorganic material content in three areas (namely, Kawadoi Basin, Moniwa-Takada moor, and Nenoshiroishi moor) were prepared to reconstruct the recurrence history of slope failure during the Holocene in Northeastern Japan. Through the S-U curve, a period with a high slope failure frequency of 5,600~4,670yrB.P. was identified in Kawadoi Basin, two of 6,390~5,070yrB.P. and 4,750~3,800yrB.P. in Moniwa-Takada moor, and three of 6,630~6,070yrB.P., 5,890~5,360yrB.P., and 5,000~4,650yrB.P. in Nenoshiroishi moor. Through the IL curve, a period with a high slope failure frequency of 5,600~5,140yrB.P. was identified in Kawadoi Basin, and two of 6,390~6,170yrB.P. and 4,750~2,840yrB.P. in Moniwa-Takada moor. Most of above-mentioned periods were included in the period of slope instability in precedent studies. However, the periods with high slope failure frequency in this study were rather different from those in precedent studies. The times and numbers associated with these periods in each study area also showed discrepancies. Accordingly, to achieve the above-mentioned purpose, more case studies must be performed to improve the reconstruction level of slope failure frequency, which could be explained through the analysis of pollen composition and inorganic material content.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.137-150
• /
• 2002

Recently, plane failure mode occurred frequently along the bedding plane having low angle dip about 20 degree when cutting slopes were constructed in sedimentary rock region of the Gyeongsang Basin. Landslide of the Whangryeong Mountain which was occurred at Busan Metropolitan City in 1999 belongs to the category mentioned above. Reconstruction for cutting slope of the Whangryeong Mountain has finished in 2000 and final grade of reconstructed cutting slope is 1:2.0. To analyze slope failure mode for landslide of the Whangryeong Mountain, various analyses were performed such as in-situ investigation and test, drilling, laboratory test, aerial photograph interpretation, X-ray diffraction analysis, and slope stability analysis using Stereographic Projection and Limit Equilibrium methods. As the result, it is identified that tension cracks had been developed one year before the landslide took place. The tension crack semis to be formed by merging several joint sets. It appears that failure blocks broke down along the sliding planes of different layers. Risk of plane failure is conformed as a result of stability analysis using Stereographic Projection and Limit Equilibrium methods in case that greenish gray tuffaceous shales, regared as sliding planes, are weathered. From now on, a detailed investigation is needed for the thin layers which is sensitive to weathering, and stability analysis for this layer is performed at cut slope construction site having similar geological condition.